Re: Bow Thruster Amps rating.


Chris Doucette
 


Thanks everyone!  My setup has me in 4 groups of 100AH 12V Battle Borns @24v (400AH).  I have each group's positives and negatives aggregating to corresponding bus bars that then lead to the battery box posts.  I have an AMP ANL-style fuse holder in-line on the positive bus bar.  Everything I touch on this boat is going to be fused / breakered out appropriately.  I'll start with the 500amp and move up to 600 if needed.  

Bill Kinney- basically doing what you have done with your 24v / 12v distribution. I am going to work backwards from distribution and  "Unstack" the main Amel switches and move all the cables to bus bars (4 of them Engine Pos, Engine Neg, House load Pos, House Neg.) proper fusing closest to distribution and breakered out for switching. Same goes with any of the 12v distributions. All with appropriate marine wire, fittings, and labeling. 

On the AC side I am removing the Amel Auto Priority Gen / Shore Power priority switch (yes it has severed her well so far) in favor of a manual rotary Gen-Off_Shore switch..  Just for my peace of mind. 

Chris 

Join main@AmelYachtOwners.groups.io to automatically receive all group messages.