Re: HATCH DOOR REPAIR WITHOUT REMOVING THE HATCH
eric freedman
Hi Slavko, I just put it on with contact cement. I allowed the cement to dry on both surfaces and the carefully applied the laminate. I used a laminate roller, like a paint roller, but much harder, to make sure the laminate was completely secure. Contact cement is very strong and once attached it is almost impossible to remove or change the position. It has been on for 8-10 years and no problems. You need to make guides on either side of the area where the companionway enters the slot so you can get a router level and get right to the edge. It is shown in my photos. The rest is rather simple.
Fair Winds Eric
From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of Slavko Despotovic
Sent: Wednesday, November 25, 2020 2:08 AM To: main@AmelYachtOwners.groups.io Subject: Re: [AmelYachtOwners] HATCH DOOR REPAIR WITHOUT REMOVING THE HATCH
Hi Eric,
|
|