Re: Bow thruster tube anomaly


Juan de Zulueta
 

Hi All,
I had similar problem. Rust over the motor is creating that problem.
There is a special extractor tool sold by amel which is holding gently on the tube and extracting by moving screws pushing on the motor.
I am removing the tube every year and put a fair amount of grease on the motor connection to the tube.


Juan de Zulueta
+33680895892
sent from my Ipad.

Le 6 févr. 2021 à 13:06, Davi Rozgonyi <davi.rozgonyi@...> a écrit :

Hey all... So I've had a terrible time trying to remove my bow thruster foot for service (super maramu #56 1991). I inadvertently damaged the fiberglass tube, which is another question : how do I repair it? Is it a glass job?

But it is still stuck. Tried the usual things (penetrant over weeks, chain wrench, amel tool, tapping, banging, etc). There are these little screws I've never seen before on anyone's bt or in photos. Could they somehow be holding it on? The foot was removed and greased 3.5 years ago with no problem, and barely used, so rust alone seems like a stretch...there is some but doesn't look drastic. I'm afraid to remove all of these screws because of something messes up, I'll have a hard time taking her out to a yard with no bowthruster.

Anyone know what these screws do? Any ideas on how to repair a gouge in the tube?

Thanks, y'all 
<IMG_20210206_175033-01.jpeg>
<IMG_20210206_184809-01.jpeg>
<IMG_20210206_185334-01.jpeg>

Join main@AmelYachtOwners.groups.io to automatically receive all group messages.