Re: [Amel Yacht Owners] electrolysis on jib furling gearbox? [1 Attachment]

Dominique Sery

I made it as simple as possible.
As it has to be installed first after shore power socket and before all devices, circuit-breakers...
I installed the galvanic isolator in the aft trunk, port side, near the dock socket, in a waterproof box on the small shelf.
It is thus installed before the residual current circuit breaker and before the transfer switch. 
Note that the unit is "waterproof" IP 67.
It is simply two diodes mounted in opposite directions embedded in the resin. It is not very sensitive to possible humidity.
Very easy and fast to install, there is only the ground wire to be connected.

Join to automatically receive all group messages.