toggle quoted messageShow quoted text
Hi Bill, Servus Wolfgang,
THX for your quick response. But our´s square housing shaped Xantrex is in the product data sheet only as "Xantrex Akku Monitor" named. No "Link , Link Pro, Link Lite" or so.
I found in the Web the same manual as we have obviously on board, but the listing of values to adjust is little different as Wolfgang mentioned, regarding his LinkLite.
May be I can match these settings over on ours? It´s a Monitor, not a charging management, mhm?
If there is anybody in the Group who’s is familiar with same type of monitor, he is able to sent me the correct adjustments (24V), very much appreciated.
THX for help.
Best wishes and stay safe.
Am 22.02.2021 um 16:49 schrieb CW Bill Rouse <brouse@...
There were 2 different versions of the Xantrex battery monitor used on 54s.
I believe the Link 10 was used on early 54s, the LinkPro on mid-build 54s, and if I am not mistaken, Mastervolt on the last 54s.
Hello Wolfgang, and other related Amelians,
your hint and listing of the Xantrex values are very interesting and important for me. we also have the Xantrex battery monitor on "Soleil Bleu" #088, as I'm sure many other 54s do. However, in the operator's manual I find a different listing of the positions as you describe. I have always wanted to readjust our Xantrex, also because we installed a complete AGM bank with Victrons 110 Ah last year, but I don't know the correct basic settings in the Xantrex for Amel 54. Do you perhaps have a newer Xantrex than we do? The manual I have just called up on the net is from Oct 2004. We took over the setting from the previous owner, with classic lead-acid batteries. Surely there are differences?
Thank you for your much appreciated recommendations.
Fair finds and stay safe.
Amel 54 #162 came with XANTREX Batteriecheck
Original Programm for 630 Ah wet-cell :
F1 : 630 Ah F7 : 1,75 r.b. : off
F2 : 27,3 V F 8 : 500 A f.f. : off
F3 : 7,0 % F9 : 30 A
F4 : 70 % F10 : none
F5 : 23,5 V F11: - - -
F6 : 80 % F12 : off