Re: Linear drive installation


Brent Cameron
 

Thanks Pat. I misunderstood. I had thought that you had done the modifications to put in a second linear drive instead of a rotary one (I have never seen a Super Maramu without one so should have guess they were standard).  It all makes complete sense to me now. I completely agree about the redundancy and ability to steer if a cable breaks. I’d definitely want at least one there myself. This forum (and its members) is an awesome resource. Say hi to Diane.   

Brent

On Mar 21, 2021, 8:51 AM -0400, Patrick McAneny via groups.io , wrote:
Eamonn, You came to the same conclusion as I did. I originally took a photo from an Amel  with a factory installed drive ,and intended to install mine in the same way. It became clear that to do so, I would need to cut out structural stringers and cut out the tabbing that secured the plywood bed base on the starboard side to remove it ,none of which I was willing to do. Also to mount the drive and to calculate the throw (travel) of the arm ,would have been very hard . As you said , the way I installed it ,only required a small amount of cosmetic change ,and I enclosed the arm within a small mahogany box that is up and out of the way,which you never even notice .
From my photos you can see where I mounted the base to the bulkhead under the bed , I added (epoxied ) backing plates and spacers . I will take some addition photos and measurements and send them along or place them in the photo section along with the rest of my photos on the subject,if that is possible. I will have to consult with my in house nerd , Diane on that. It is all that I can do to reply (type) with my two index fingers. They did not teach typing back in my day , as it was before the invention of the typewriter. Well my fingers are sore ,see ya.
Pat 
SM Shenanigans #123


-----Original Message-----
From: Eamonn Washington <eamonn.washington@...>
To: main@AmelYachtOwners.groups.io
Sent: Sat, Mar 20, 2021 10:54 am
Subject: Re: [AmelYachtOwners] Linear drive installation

Hi Pat

it seems that Amel installed autopilots directly on the quadrant which were based on the aft arm of the quadrant being extended aft.  Older Super Maramus cannot extend the quadrant aft without making structural changes to the stringers, which is an unnecessary risk.  So your solution of extending the forward arm of the quadrant with cosmetic changes only (not structural) is the way to go.

Yes it would be helpful if you measured the thickness of the arm extension that you welded onto the quadrant.  I would be tempted to continue the quadrant extension with metal of the same thickness, or even to make a new one piece extended quadrant.   The dimensions of the extension would be useful too, as well as a close up photo of the extension piece.  No rush, it will be a while before I am allowed near the boat.

Many thanks
--
Eamonn Washington
Travel Bug
Super Maramu #151
Ireland

--
Brent Cameron

Future Amel Owner & Amel Owner Registry Moderator

Oro-Medonte, Ontario, Canada

Join main@AmelYachtOwners.groups.io to automatically receive all group messages.