Re: Raspberry Pi


Mark Erdos
 

Ah, yes. Beer: the universal currency of cruisers.

Good luck with your project.

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff - SM2K - #275

Currently cruising - Tahiti, French Polynesia

www.creampuff.us

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of Mark Garver via groups.io

Sent: Friday, April 23, 2021 5:04 AM
To: main@amelyachtowners.groups.io
Cc: AmelYachtOwners@groups.io
Subject: Re: [AmelYachtOwners] Raspberry Pi

 

Mark,

 

I am heading down this path myself. Like you I have a friend that has his whole boat tricked out just as you describe and it is amazing and VERY inexpensive. Another incredible benefit is power consumption of a Raspberry PI computer vs a traditional computer and other electronics. On his boat not only can he view the status of his boat if there is Internet connectivity, he can control many functions remote as well.

 

Good luck if you go down this path, it will be worth it. Fortunately, for me my friend is going to do all of the work for me :) Cost me a couple of beers!

 

Best,

 

Mark

S/V It’s Good

Amel SM #105

Currently in Chesapeake Bay



On Apr 22, 2021, at 7:24 PM, Mark Erdos <mcerdos@...> wrote:

 

I am curious if anyone in this group is using Raspberry Pi’s as a computer aboard. 

 

Yesterday, I was on a friends boat. His entire NMEA network, entertainment and programs were available on any monitor on the boat (via a wireless router). With a click of the mouse he can view charts (OpenCPN or Time Zero), anchor alarm status, wind speed (and all related navigation information), battery status, solar panels etc. on any of the standard 5 mounted LED monitors on the vessel. The entire system cost him about US$1,000 (including the monitors). He can even split screen sailing info and watch a movie at the helm while on watch. His entire vast media library is 100% available at any station.

 

The best part: he has various alarms set up and the Raspberry Pi monitors. With the 12v LED monitors off, the system draws only 0.4 amps at 12 vdc. So, his anchor, battery voltage, or AIS alarms etc are all able to run 24/7.

 

While the vessel is in an anchorage or marina with internet connectivity, he can use his phone to remote access the entire onboard network to see the status of his boat systems. For example, he can check to see if the bilge pump has cycled and how many times. 

 

I am a big proponent of using an onboard PC rather than a plotter and manufacture network (such as Raymarine’s Seatalk). I have all of my instruments connected to the ships computer and can display everything on one monitor (with an option for a second). However, my system is now about 8 years old and I was stunned to find the entire setup could be replaced with a US$99 Raspberry Pi. 

 

I would be interested to hear about what others are using or if anyone plans to go this route.

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff - SM2K - #275

Currently cruising - Tahiti, French Polynesia

 

 

Join main@AmelYachtOwners.groups.io to automatically receive all group messages.