Re: vetus coupling removal


eric freedman
 

I forgot to mention,

I just replaced my engine with the new model of the 4JH3 with a 4jh4.

The disk came off easily after having it machined 4 years ago.

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: main@AmelYachtOwners.groups.io On Behalf Of Rudolf Waldispuehl
Sent: Thursday, May 06, 2021 4:37 AM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] vetus coupling removal

 

Hi Amelias and Eric

 

I tried to remove the Vetus coupling from the shaft and I was not able to remove it even not with a strong puller and heat.

Maybe someone out there has another great Idea?

 

@Eric, is saw in an old treat from 2019 you did it by pushing with screws/bolts from the back but I cannot undo the existing screw’s. I suppose you saw it away and used new 10mm bolts for the tool.

 

I’ll make some photos when I’m done and send it to the forum.

 

Thanks for advice and best regards

 

Ruedi Waldispuehl

"SY WASABI"

Amel 54. #55

 

Von: "main@AmelYachtOwners.groups.io" <main@AmelYachtOwners.groups.io> im Auftrag von eric freedman <kimberlite@...>
Antworten an: "main@AmelYachtOwners.groups.io" <main@AmelYachtOwners.groups.io>
Datum: Donnerstag, 12. Dezember 2019 um 17:11
An: "main@AmelYachtOwners.groups.io" <main@AmelYachtOwners.groups.io>
Betreff: Re: [AmelYachtOwners] vetus coupling removal

 

Hi,

Here is the photo. Once you have it apart have a machine shop open up the hole a few thousands of an inch.

Fair Winds

Eric

Amel Super Maramu #376

 

 

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of Herbert Lackner
Sent: Tuesday, December 10, 2019 11:09 PM
To: main@AmelYachtOwners.groups.io
Subject: [AmelYachtOwners] vetus coupling removal

 

today I tried to align the engine and the c-drive. unfortunately I was not able to remove the vetus coupling from the shaft, tried it also with a puller but without success.  Are there any tricks, special tools,... how this can be done? I remember Eric uploaded a foto showing the tool he made for that, but could not find it. any help welcome

herbert, SN120, kali mera, Mazatlan

Join main@AmelYachtOwners.groups.io to automatically receive all group messages.