- Play in Brunson H6 prop blade
Re: Play in Brunson H6 prop blade
toggle quoted messageShow quoted text
It sounds to me like something was done wrong, or something is wrong. I have seen the bearings. That is way too much play.
On Sun, Jun 6, 2021 at 4:52 PM Mohammad Shirloo <mshirloo@...
While diving to clean the hull and the prop, I noticed that one of the blades rocks back and forth about 1/8” to 1/4”. The other two are tight.
The blades had new bearings installed in 2018 with about 1800 hours on the engine. This is about the time Brunton recommends an overhaul. The work was done at Manoel”s in Malta by workers that seemed competent.
Has anyone run into this ? Any information on repairs ot solutions would be appreciated.
Join main@AmelYachtOwners.groups.io to automatically receive all group messages.