Re: VHF antennas
Scott SV Tengah
toggle quoted messageShow quoted text
It's not the solder that's the issue. It's the design of the PL-259 plug used for VHF antennas. You just have to seal it well with self amalgamating tape and then a layer of good electrical tape. I even zip tied the electrical tape for good measure.
Some stuff the plug with silicone grease to remove all air pockets. But knowing how nothing sticks to silicone, I just put a little grease on the conductor and then wrapped the whole connector up really well.
On Wed, Jun 23, 2021 at 12:17 PM Porter McRoberts via groups.io <email@example.com> wrote:
2007 A54 #69