Re: Battery Switches
toggle quoted messageShow quoted text
Just for laughs.
Test the voltage between the lead posts on the starter battery and the connections at the back of the switch.
I found that the cables were internally corroded as Amel uses welding cable and not tinned marine wire, Once I changed the cables the engine started very quickly,
Kimberlite Amel Super Maramu #376
From: main@AmelYachtOwners.groups.io On Behalf Of Patrick McAneny via groups.io
Paul, I just went out to the boat and it took a hard pull or two ,but the handle did come off. Did you access the inside to clean the contacts,if so ,was there any problem getting the back off. It won't come as a surprise to you , Georgetown Marina went into foreclosure last year due to poor management.
Thanks for the tip,