Re: Zinc Anodes


Eric Freedman
 

Hi Joel,

Nice to see you on the board.

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: main@AmelYachtOwners.groups.io On Behalf Of amelforme
Sent: Thursday, August 05, 2021 8:44 AM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] Zinc Anodes

 

Hi Rick. Most of my clients buy the inch sized zincs without the copper insert ( easy to find ) and ream or drill the hole slightly larger to accept the somewhat larger metric fastener. I did this on all three Amel boats I owned with excellent results. Metric zincs are hard to find in CONUS and the ones I did find in Annapolis were three times as expensive.

 

Hope this helps.

 

All the best,

Joel

 

           JOEL F. POTTER ~ CRUISING YACHT SPECIALIST, L.L.C.

                                         The Experienced AMEL Guy

UNSURPASSED AMEL MARKETING EXPERIENCE AND PRODUCT KNOWLEDGE

                                  Office 954-462-5869  Cell 954-812-2485

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Rick Stanley
Sent: Thursday, August 5, 2021 7:37 AM
To: main@AmelYachtOwners.groups.io
Subject: [AmelYachtOwners] Zinc Anodes

 

Hey Folks,

Wondering if anyone has a good source for metric anodes on the US easr coast. The ones I'm replacing have a 10mm threaded brass sheath in the middle to take the bolt. Any ideas? I've called abound a bit, no luck so far.

Thanks,
Rick Stanley
S/V Althea, SM2K
Rock Hall, MD

Join main@AmelYachtOwners.groups.io to automatically receive all group messages.