Re: Main Sail Foil


Eloi Bamberg
 

Hey,
I don't know if it fits the jib furler.
I didn't write down the measurements but I try to remember:
diameter: 31 mm
the top grove is 15 x 17 mm (the sharp edges have to be rounded)
on the bottom you have to flatten by about 3 mm
diameter of the hole : 8 mm
length: 50 mm, 20 mm from bottom to hole and 30 mm above

When the hole in the furling tube is already ovalised, it has "thickened" up towards the inner side of the tube. You have to flaten that with a file or a dremel.


regards,
Eloi

Join main@AmelYachtOwners.groups.io to automatically receive all group messages.