Re: Electric Genua Furler SM2K


 

You may need a new one of these. Photo is of the last generation. There might be one at SAV@.... If not contact me at brouse@...
image.png

CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar

On Wed, Aug 18, 2021 at 12:23 PM Alexander Schenk via groups.io <schenkschierloh=me.com@groups.io> wrote:
Thanks. Unfortunately some (at least one) seams to have sheared of and is stuck in the bottom and I can’t fit a screw extractor through the access hole…


On 18 Aug 2021, at 10:01, Danny and Yvonne SIMMS <simms@...> wrote:



Hi. If you look you will find an access hole down through the rope pully. You can access the screws one at a time through this. You need a heavy duty Phillips screwdriver.

Regards

Danny

SM 299

Ocean Pearl

On 18 August 2021 at 19:24 "Alexander Schenk via groups.io" <schenkschierloh@...> wrote:


Hallo,
I am wondering how to dismantle the electric curler in order to put in the apparently three screws that fix the small grey disc to the motor unit as seen on the foto/video.

I need to sand and repaint in any case, any specific tipps are appreciated, apparently not so easy to paint alloy..


Best
Alexander
SY Antinea
SM2K #231



Join main@AmelYachtOwners.groups.io to automatically receive all group messages.