Re: Watermaker end cap removal; Dessalator D160


Bill Kinney
 

Mark,

If it isn't one thing, it's another.  But more likely both at the same time....

Another method for removal of the membrane end caps that is a likely to be a bit more gentle to the parts is to attach a fresh water pressure water hose to the salt water inlet, fill the housing with water until it overflows from the brine outlet, then block the outlet with your finger.  Even a little pressure, and the caps just slide  right off. 

Note, do NOT do this with air pressure, the endcaps will launch off at high velocity!

Bill Kinney
SM160, Harmonie
Annapolis, MD.

Join main@AmelYachtOwners.groups.io to automatically receive all group messages.