Re: Deck gel coat or paint

Danny and Yvonne SIMMS

Hi Mike and Pat, I saw one SM, Brown Eyed Girl,  that had painted the deck white. I thought it very ugly. I too have a few areas where the tan is wearing off but the overall effect is still good.

Kind Regards


SM 299

Ocean Pearl 

On 02 September 2021 at 05:02 "Patrick McAneny via" <sailw32@...> wrote:

Mike, I have seen a deck done in white ,probably an off white and it looked good, I have also seen the tan deck with white stripe and that looked real good. We would probably go with a lighter tan and maybe a white stripe ,but for now I just want to determine if the tan is paint . I never did see your boat in Haven Harbor south ,over there a lot this spring/summer.
SM Shenanigans

-----Original Message-----
From: Mike Ondra via <mdondra@...>
Sent: Wed, Sep 1, 2021 12:27 pm
Subject: Re: [AmelYachtOwners] Deck gel coat or paint

Hi Pat,
We have thought about painting/striping the deck.
One consideration is the temperature the tan deck reaches in the sun compared to the white deck areas…tough on bare feet and a contributor to interior temperatures.
Thinking that maybe striping in white would help reduce deck temp.
If painting the tan portion, maybe a lighter color would also help to reduce surface temps.
Just a thought, and wondering if anyone has tried lighter colors to reduce temps.
Mike Ondra
Aletes SM#240 Rock Hall, MD
From: <> On Behalf Of Patrick McAneny via
Sent: Wednesday, September 1, 2021 11:20 AM
Subject: [AmelYachtOwners] Deck gel coat or paint
Looking at Danny's deck has gotten us thinking about tackling this job again,we quickly gave up once before. However before I would do the striping I would have to address all the white areas  on my deck . Is the tan color of the deck, paint or gel coat ? I know the deck is gel coat ,but is the tan color paint? If not why in so many areas has the gel coat worn away ,and why is what is under it white. Would Amel first apply tan gel coat to the mold and then a layer of white , that would not make sense. The tan is wearing off in many low traffic areas, so it is not wear ,I don't think. The tan surface appears to be very thin ,like paint. 
My point is that I would need to first paint my deck and then stripe it ,if I want the entire deck to look good and I would like to determine if I am dealing with a gel coat or painted surface.
SM Shenanigans

Join to automatically receive all group messages.