Re: B&G Sonic Speed sensors replacement

Jason Rutledge

Michele,  I did this last year with Gary Silver.  It wasn't hard.  The sensors in the boat and keel, were just pushed in.  We carefully drilled a small hole into each broken sensors (this was the hard part) and then put a screw in the sensor.  There is a hard piece of something inside the sensor, that took some patience to drill through,  We made sure the cables were loose and pulled on the screws and the sensors came right out.  I believe Bill Rouse has a write up on it....
Jason Rutledge
SV Liahona
SM 335

Join to automatically receive all group messages.