Re: Update to Bow Thruster will not go down


Mark McGovern
 

Steve,

No problem.  I am by no means an expert but it sounds like Stefan might be able to assist you in identifying the component and possibly sourcing a similar one to replace it.  Here is a link to a diode that is similar to the one that was used in the Bowthruster PCBs found in later model SMs like mine:  https://www.newark.com/vishay/gi754-e3-73/rectifier-diode-single-400-v-6/dp/97K0535?CMP=AFC-SF-T11-US

And if the trace is indeed damaged beyond repair, you can solder a small piece of wire in it's place to complete the circuit between the two through-holes that the trace previously connected.

--
Mark McGovern
SM #440 Cara
Block Island, RI USA

Join main@AmelYachtOwners.groups.io to automatically receive all group messages.