On my sm 2000, 292
The aluminum poles for the furling are :
Main mast 35mm
Genoa 51,5mm diameter
Am 20.12.2021 um 00:38 schrieb CW Bill Rouse <brouse@...>:
Normally the swivel is specified in terms of the foil diameter. The main foil diameter of a SM is 38mm.
On Sun, Dec 19, 2021 at 4:35 PM Gregory Shea <gmshea@...
That is a swivel for your SM but maybe it would work on a Sharki or Maramu? The main sail Sharki swivel is 10 cm diameter, what diameter is the one in your photo?
Sharki 133 Cap des Iles
On Dec 18, 2021, at 3:27 PM, Heinz Stutenbaeumer <heinz@...> wrote:
YOU WILL GET IT FROM AMEL.
Mit freundlichen Grüßen
On M202 the swivel was for a 53mm foil and frozen. Amel did not have a replacement swivel.
After a couple of weeks at the machine shop it was returned functional.
Additional detail with pics available if needed.
Bon Edda M202
Dear Amel friends,
Inside the furling system on our Amel Maramu 1985 hull 171 the inner ring that leads swivel around the furling has broken off. Does anyone know if I can buy parts for the swivel separately from Amel or do I have to go to a machine factory.
Dirk Hull 171
Since yesterday when I tried to park in a box in a marina in Auckland my bow thruster motor failed.
If I turn the beam to the left or right the whole power supply breaks down for a moment. After that the power is back.
I took the rudder off and it can be turned perfectly by hand.
But the same happens with the engine. No power for a few seconds, all instruments off, no rotation of the motor.
Does anyone know this problem.
Does anyone know how I can find out if it's the motor or maybe a relay that doesn't work.
Can I test the motor without a relay, maybe on the 4 cables marked D1, D2, and A1, A2?
I am grateful for a quick answer.
Heinz SY Quetzal, SM 2000, 292