Re: Machining AMEL-specific tools in NZ (outhaul puller PLUS wrench for the rudder-post-packing nut)


David Vogel
 

Hi all,

OK, I have some indicative numbers – it seems only 2 or 3 potentially for the puller for the main-outhaul.

Ross Hickey, SM#356, IntrepidKiwi
Raul Schleier, SM#344, SeaBean

I have no idea yet of the cost, as businesses here in WHargarie are just again winding up for the New year, and hence I also am just starting the contact-research on this. As there will be only 2 or 3 units, I would not expect that it will be worthwhile to go to the trouble (and cost) of establishing a CAD/CAM file for subsequent orders. Although I will research this lightly, I presently expect that whatever we do will be hand-crafted as ‘one-offs’.

I’ll keep you posted once I have an idea of the cost and timings – I’ll go first to the guy who did the copper keel grounding straps (where we did get a small economy of scale, mainly for the freight).

Regarding design details, I will template off what I have seen before on (or as referred to by) this forum, et al.

BTW, I did try a conventional gear-puller for the extracting the axle for the line-handling-winch from the main-outhaul gearbox, and it was simply not up to the task; hence why I am getting a special tool made up.

I am also looking at getting a wrench made up specifically for the packing-nut on the rudder shaft gland. Anyone interested in this???

Best,

David
SM#396, Perigee
Town Basin, Whangarei


From: <main@AmelYachtOwners.groups.io> on behalf of "Ross Hickey & Donna Hammond via groups.io" <southernadventurer@...>
Reply-To: <main@AmelYachtOwners.groups.io>
Date: Saturday, 15 January 2022 at 7:54 pm
To: <main@AmelYachtOwners.groups.io>
Subject: Re: [AmelYachtOwners] Machining AMEL-specific tools in NZ

Hi David,

We may also be interested the specific Amel main outhaul winch puller if one can be manufactured. Can you please advise of of cost and design details.

Ross Hickey
SV Intrepid Kiwi
SM2K #356
Currently cruising Turkey
+++


From: <main@AmelYachtOwners.groups.io> on behalf of Raul Schleier <raul.schleier@...>
Reply-To: <main@AmelYachtOwners.groups.io>
Date: Saturday, 15 January 2022 at 5:21 pm
To: <main@AmelYachtOwners.groups.io>
Subject: Re: [AmelYachtOwners] Machining AMEL-specific tools in NZ

Hi David,
I’d be keen to join in on this if I’m not too late. I just pulled mine borrowing a home made puller from my dock neighbour. I’m planning to service the outhaul shaft regularly from now onwards so that it doesn’t stick but I will still likely need a puller some day.
We’re just down the creek in Marsden Cove Marina if we’re not out
Email: raul “at” seabean.nz
SM2k#344, SeaBean
+++



Sent from Yahoo Mail for iPad

On Wednesday, January 5, 2022, 2:00 AM, David Vogel <david.vogel@...> wrote:
Calling all SM owners in NZ.

Having done a small run of the copper grounding straps for the grey-water bilge, and been happy with the results, I am now planning on getting some AMEL-specific tools machined - for example, the puller for the main-outhaul line-handling winch/motor/gearbox assembly.

It may be possible to come to some kind of economy-of-scale arrangement with the fabricator/s.  Even if not, if you have any hints or tips on where to go / who to use, I would be interested to hear; or, if you're wanting to bolster your tool-kit with that special nick-knack ...

If you’re interested in getting involved, please get back to me via this forum; I would then plan to take the discussion off-line for resolving the nitty-gritty.

Thanks, and best to all,

David
SM#396, Perigee
Town-Basin, Whangarei






--
Ross Hickey & Donna Hammond
SV Intrepid Kiwi
SM2K #356
Currently in Turkey

Join main@AmelYachtOwners.groups.io to automatically receive all group messages.