Re: Whangerei, New Zealand recommendations?


Danny and Yvonne SIMMS
 

Hi all, I am a local being based an 8 hour sail North of Opua. For convenience I get most of my work done there and there are good tradesmen there. However there is more competition in Whangarei and surprisingly I have had good work done at a good price in central Auckland near the big Westhaven Marina. Ovlov marine beat the competition by some thousands when I replaced the motor. Again, there is competition there.
Like wise I have high regard for the Bridge Marina and hardstand in Tauranga. Bruce Goodchap the manager of the hardstand is the nicest and most honest guy you could find anywhere. Very helpful too. So guys, you have choices.
Regards
Danny 
SM 299 Ocean Pearl

On 22/06/2022 18:55 Scott SV Tengah <scott.nguyen@...> wrote:


Ah ok so my understanding was that Whangarei was cheaper and had more/better contractors compared to Opua.

Is that not the case?

We plan to leave the boat for a few months and travel by RV so we don't care that much where the boat is.

On Tue, Jun 21, 2022, 19:40 Bruno COTTE <cotte.bruno@...> wrote:
For me the best and cheapest place for all these jobs is OPUA 
Nice marina and great facilities and experienced people 


Envoyé de mon iPhone

Le 22 juin 2022 à 08:31, heinz@... a écrit :

I like Riverside Drive Marina Wangarei. Very nice and friendly Marina.  No Problem with your electricity like other marinas where you are not allowed to use the electricity before you not have a certificate elektrishen that contols your yacht. Nice town and a cool barbecue area in the Marina. 
Heinz sy Quetzal. 292

Am 22.06.2022 12:43 schrieb Scott SV Tengah <Scott.nguyen@...>:
Hi all,

We're headed to New Zealand this Austral Summer and have a load of projects to get done. I know some of you are from NZ and many of you have been there, so I'm hoping to get some recommendations for the following projects:

1) Strip hull to gelcoat and repaint. It seems that in NZ, soda blasting is less common than sand blasting. I'd also like to get the cast iron ballast stripped and recoated. We also want to raise the waterline.

2) Building a hard top for our A54
After this thread, I'm seriously contemplating having a hard top added. The current favored design is something similar to Soleil Bleu
https://amelyachtowners.groups.io/g/main/topic/hardtop_for_amel_54/75406304?p=Created%2C%2C%2C20%2C1%2C0%2C0&jump=1

3) Replace motor mounts. Two bolts have broken on our motor mounts so the motor will need to be lifted and the remaining studs drilled out.

4) Acrylic window replacement

5) Solar electrical. We want to add more rigid solar on top of the new hard top. 

Currently, we have an appointment for haul out at Norsand boatyard and they're mostly an "open boatyard" except for boatbuilding and painting. For projects requiring those tradesmen, we will need to use Norsand. If Norsand is not a good choice, I'm happy to switch boatyards.

Thanks in advance!
--
Scott 
2007 A54 #69
SV Tengah, currently Tahiti, preparing for passage to Fiji
http://www.svtengah.com


--
Sv Quetzal, Supermaramu 2000, 292, cheers Heinz




--
Scott 
2007 A54 #69
SV Tengah
http://www.svtengah.com

Join main@AmelYachtOwners.groups.io to automatically receive all group messages.