Re: Goiot hatch seals

Mike Longcor (SV Trilogy)

Hi Christian,

That is a bit confusing. Sorry I don't have the answer. I ended up sourcing the gaskets through a local chandlery. They charged 12.59NZD which is about 7.77euro per meter. So hopefully the website is 6.02euro per meter, but definitely ask for clarification. Good luck!

Mike Longcor
SV Trilogy SM23

On Thu, Aug 4, 2022, 10:47 AM Christian Sloane <csloane@...> wrote:
Hopping on this one- Thanks for the info, Mike
Do you know if the prices listed on their site are per meter? 
if so the hatch gasket pricing is confusing, as said 6.02 when click quantity, but has info that says “14.10” per meter
If you dont know I will reach out to them, as I need to order these, as well….

Christian Sloane
SM2k #350
Ensenada, MX

On Aug 3, 2022, at 1:27 PM, Mike Longcor (SV Trilogy) <svtrilogy53@...> wrote:

Hi Lance,

If they are tradition portlights, the seal is 8mm diameter round EPDM foam. Here's one website that can supply it:

They also have the tradition hatch gaskets, which is a trapezoid shaped profile.

The dimensions are given so you could try and source this stuff elsewhere. The hatch gasket could be tricky given it's profile. But 8mm diameter round gasket is common.

Hope this helps.
Mike Longcor
SV Trilogy SM23

On Thu, Aug 4, 2022, 3:26 AM Lance Leonard <Elscubano@...> wrote:
Time to replace the portlight and hatch seals on Minerva, Maramu #135. I looked in the wiki-how on this site, but the attachment with Bill Rouse’s response to a similar question was deleted. Does anyone have a source? Getting kind of weepy over my stove.
Lance Leonard
S/V Minerva
Currently Cruising Downeast Maine

Join { to automatically receive all group messages.