1. Messages
  2. Brush set (4) for jib furler motor Supermaramu

Re: Brush set (4) for jib furler motor Supermaramu

CW Bill Rouse
 

This is everything you may need including brush sizes and where to get them


 Amel Genoa (Final Version) 24v Motor & Brushes.pdf



CW Bill Rouse Amel Owners Yacht School
720 Winnie, Galveston Island, Texas 77550 
   

On Thu, Jul 28, 2022 at 4:43 PM ERIC LICHTY & ROBYN ATKINSON <eclmarine@...> wrote:
Thanks Marian and Bill for good info re jib furling motor brushes. When back on the boat in August, will take more pics and continue research.  Again, thanks all,  Eric

On Thu, Jul 28, 2022 at 9:27 AM Marian Toncic-Sorinj <marian@...> wrote:
I have a 12v System.
Furlermotor (Same as yours on your Picture) and Lofrans Tigres motor are the same. You need the 24v Motor i think. Both are available.
My Contact to Lofrans was
+39 039 2001973. you should talk to them because of the brushkits

Here are Pictures of my FurlerMotor ,

imageimage

Marian

Am 28.07.2022 um 15:31 schrieb CW Bill Rouse <brouse@...>:


Eric,

Lofrans uses many different motors. Do you know which is the same as the genoa motor?
image.png


CW Bill Rouse Amel Owners Yacht School
720 Winnie, Galveston Island, Texas 77550 
   
View My Training Calendar

On Thu, Jul 28, 2022 at 6:09 AM Marian Toncic-Sorinj <marian@...> wrote:

Am 2022-07-27 02:47, schrieb ERIC LICHTY & ROBYN ATKINSON:

Hello Group: Eric and Robyn here on LIBBY, SM#196, 1997 build, sailing out of Los Angeles

Jib furler motor stopped working. Removed cover and found a handful of salt residue up to and in the brush sets. Confirmed power to motor and foil turning easily.  Cleaned/vaccumed salt deposits then electrical cleaner and corrosionx.
Motor runs quiet and strong, back in business.  Now looking for source for brush set (4) for the 24v motor.  Any spec. plate is long gone and inquiries to SAV@Amel indicate the motor and parts are no longer supported.  Does anyone happen to have a source for those brushes or anyone with extra spares willing to sell four?   Regards and good sailing, Eric
 
--
Eric C. Lichty
ECLMARINE, LLC.
cell:      425 354-7720

Hello Eric,

i had similar Problems. These are old Bosch-Motors that are not supported any more. But Lofrans produces these motors now. for example "Lofrans-Tigres Anchorwinslet" is driven by exact this Motor. Best regards Marian



--
Eric C. Lichty
ECLMARINE, LLC.
cell:      425 354-7720
Join main@AmelYachtOwners.groups.io to automatically receive all group messages.