On Nov 24, 2022, at 2:49 PM, Ken Uber <kenneth.uber@...> wrote:



I found this article on another FB site when investigating changing the MMSI number (yet to be done).

It is about replacing a ICOM screen, which might give you enough information to allow you to try it on yours.

The original was posted by a Mr Ken Goodings 

Regards

Ken Uber 

SY Eleuthera

SM #007

Williamstown Australia

On Fri, 25 Nov 2022 at 06:24, Stefan Schaufert <mail@...> wrote:

Dear Amelians,

maybe you have/ had the same on your boat - regarding the Furuno NavNet VX2 screen on the helm station and the ICOM VHF on the nav table.
Both screens show something like black or significantly darker spots/ areas - on the inside of the screen glass.
It seems to be related to heat (4 month on the hard in Aruba). Since this time the signs have been very clear.

IMO UV light etc. can't be the cause as both devices are very protected most of the time.

Do you know if it makes sense to open the devices and try to clean it or what ever?
Do you know other solutions?
Or is this discoloration irremovable?

Thx a lot for your appreciated hints and ideas.

Best regards
Stefan
A 54 #119 Lady Charlyette, currently still in Aruba

<C7FCD095-003B-40BC-BADC-96C29830538C.jpeg>

<6917FA19-B9F8-49C7-8C7B-507976C33391.jpeg>

--

Regards

 

Ken Uber

0411 096 804

<Memo.pdf>