Re: [Amel] Maramu rigging
|
kimberlite <kimberlite@...>
If you happen by St Martin FKG rigging has everything metric you will need
toggle quoted message
Show quoted text
and they do a fantastic job. Fair Winds Eric Amel Super Maramu #376 Kimberlite _____ From: amelyachtowners@... [mailto:amelyachtowners@...] On Behalf Of bsarff@... Sent: Tuesday, October 26, 2010 11:42 AM To: amelyachtowners@... Subject: Re: [Amel] Maramu rigging Thanks for the reply. You are afirming that I should replace it before heading south. Bob
----- Original Message -----
From: "Kent Robertson" <karkauai@... <mailto:karkauai%40yahoo.com> > To: amelyachtowners@... <mailto:amelyachtowners%40yahoogroups.com> Sent: Monday, October 25, 2010 10:29:48 AM Subject: Re: [Amel] Maramu rigging It is significantly more expensive to replace the standing rigging with metric wire and fittings if you are in the US. I understand it's not the case if you are in Europe or elsewhere. If you switch to US standard sizes, there will be some issues with fittings that are attached to the boat. I opted to use metric sized cables in spite of the added cost because I thought it might detract from resale value if I switched to US sizes. I had a little pitting and rust at the entry points of the cables into the swages, and cut two of the swages lengthwise to look at the cables within...there was significant deterioration of the cables and I was glad I'd decided to change the rigging even though I was told I could probably get another year or two out of the originals. Good luck. Kent SM243 KRISTY |
|
|