Please feel free to call or email if you have issues
Regards Richard Piller
Yacht Brokerage Service above and beyond the expected"
Walczak Yacht Brokerage Service LLC 2 Compromise St Annapolis, MD 21401
Cell 603 767 5330 Office Fax
www.Walczakyacht.com
On Apr 3, 2011, at 15:01, Lior <lior246@...> wrote:
thank a lot richard. i will be on the boat in about 4 weeks and then i will fix it. i hope that when i come, i will not see only the mast above the water :-) thank again lior
ב-3 באפר 2011, בשעה 18:42, Richard Piller <richard03801@...> כתב/ה:
Lior, the tube is held by and plastic clip. it comes our very easy. Do NOT forget to unplug the on off switch also at the top of the tube. Keep a bucket handy as the business end of the tube have an unwelcome present for you. Check the float the string is at the top. Clean the tube and the float to be sure it moves freely in the tube. There is a rod with a pin in it that the string attaches to be sure it is in the slot in the tube. This is not a big deal to service for fix. Good luck. Richard on SM 209
________________________________ From: Lior <lior246@...> To: "amelyachtowners@..." <amelyachtowners@...> Sent: Sun, April 3, 2011 10:58:45 AM Subject: Re: [Amel] sensor of the bilg pump
hi richard
thank a lot for the information. i know where is the switch. manuelly it works perfect but when i turn it to automatic it deosnt work. the water alarm comes before the automatic sensor. i will search the tube and the string. can i take it out easy?
thanks and regards lior
ב-3 באפר 2011, בשעה 13:28, Richard03801 <richard03801@...> כתב/ה:
Hi there is a switch mounted on the top of the black tube that goes into the bilge it is a simple on off unit with an arm and string when the float goes up it pulls via the string and turns the pump on when the water drops off.
Good luck Richard Piller sm 209
Yacht Brokerage Service above and beyond the expected"
Walczak Yacht Brokerage Service LLC 2 Compromise St Annapolis, MD 21401
Cell 603 767 5330 Office Fax
www.Walczakyacht.com
On Apr 3, 2011, at 4:09, Lior <lior246@...> wrote:
hi the automatic bilg pump in our amel maramu does not work. does anyone know how can i check the sensor and where it is?
thanks lior sy sababa, maramu #155
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
