Thanks Joel and Richard.
Eric Maramu 105
From: Richard03801 <firstname.lastname@example.org>
To: "email@example.com" <firstname.lastname@example.org>
Sent: Sat, May 7, 2011 1:16:59 PM
Subject: [Amel] Re: [Amel standing rigging tensioning
First make sure the
2 masts are straight in both directions/sides bring all the stays up going
around the boat. As the rig gets tighter using a mallet or wooden hammer handle
tap the wire when they no longer
Have a "dead" sound or if they have "ring " take another half turn.
Then take the boat put for a sail and repeat the process. Youll need to this a
few time as the rig settles in and the stays take a set as then rig will stretch
for a while.
Yes there are gauges to check the stays riggers have been doing it this way for
Regards. Sm 209 for sale in Annapolis for sale.
"Yacht Brokerage Service above and beyond the expected"
Walczak Yacht Brokerage Service LLC
2 Compromise St
Annapolis, MD 21401
Cell 603 767 5330
On May 6, 2011, at 22:19, email@example.com wrote:
Joel, I took your advise and painted my entire mast, due to rain and pollen
determine when tight is tight enough? Someone posted a while back to measure[Non-text portions of this message have been removed]