Date   

Re: [Amel Yacht Owners] "Listen Mizzen"

Beaute Olivier
 

Hi Rick,

the mizzen sheet's translation in french is "ecoute d'artimon". Ecoute in french means also listen (as when you listen to music). So, obviously a bad translation from French to English.

Merry Christmas.

Olivier


On Tuesday, December 22, 2015 1:07 AM, "rickgrimes1@... [amelyachtowners]" <amelyachtowners@...> wrote:


 
I'm reviewing the list of running rigging published on the Amel Forum ("Measures of Super Maramu") and mostly have it figured out.  But there is reference after the Mizzen halyard to a "Listen mizzen" and later, a "point remote listening mizzen> truck: 28cm" and later "Listening to bulge."
 
In a word search of the Forum, no one seems to have asked this question or used this term and when I Google "listening mizzen", the only thing that comes up is...the Amel forum "Measures of..."  Is this a uniquely Amel term? A misspelling? A poor English translation of a French word? Happy to have one of those "oh, duh" moments but right now I'm flummoxed...

Rick Grimes
"Rascal" SM2k (#404)




"Listen Mizzen"

rickgrimes1@...
 

I'm reviewing the list of running rigging published on the Amel Forum ("Measures of Super Maramu") and mostly have it figured out.  But there is reference after the Mizzen halyard to a "Listen mizzen" and later, a "point remote listening mizzen> truck: 28cm" and later "Listening to bulge."

 

In a word search of the Forum, no one seems to have asked this question or used this term and when I Google "listening mizzen", the only thing that comes up is...the Amel forum "Measures of..."  Is this a uniquely Amel term? A misspelling? A poor English translation of a French word? Happy to have one of those "oh, duh" moments but right now I'm flummoxed...


Rick Grimes

"Rascal" SM2k (#404)



Re: [Amel Yacht Owners] "Must Have" spares and preparations

Alexandre Uster von Baar
 

Sorry for the late reply Eamonn, finally getting to read all the Forum email since I arrived in TCI.

I have 2 “Swiss Bike” (X-70 and Paratrooper), they have full size wheel (26”) and fold, they are both in the Lazarrette for crossing, but 1 is usually on the deck in case of day sail.
For info, when I was in the Bahamas, I had more tyre failure than anticipated (also had patches to fix the tube), then I think the sun start to make damages.
So now on the tyre, I put a UV protection and also cover the bike(s) when they are not in the Lazarette.

Sincerely, Alexandre




--------------------------------------------

On Sun, 11/29/15, eamonn.washington@... [amelyachtowners] <amelyachtowners@...> wrote:

Subject: Re: [Amel Yacht Owners] "Must Have" spares and preparations
To: amelyachtowners@...
Date: Sunday, November 29, 2015, 11:00 AM


 









Wow

I am
overwhelmed with the advice, great stuff.  I never heard of
racor filters or antal car and did not know I should vacuum
pack spares, etc.

I
considered adding a folding bicycle but am stunned by the
spares list from Alexandre, including 14 spare tubes & 6
tires?  Was your bike on deck the whole time?

I am taking all the advice on
board, including the sensible get to know the boat better in
local waters for some of the improvements I was thinking
of.  Also now I am questioning the wisdom of fresh water
for the chain; just leave the sea water to do the work.  I
might add a second cockpit water connection instead with a
longer hose than the deck shower for cleaning the deck ... a
much cheaper option.

My
plans are in 2016 to move the boat from St Raphael to
somewhere else in the Mediterranean, and take 2 months (May
& June) time out for that.  Besides a few weeks more in
2016, my real plans start in 2017 where I intend to live
aboard for 4 to 6 months every year for the foreseeable
future (10+ years).  2018 should see us around
Ireland/Scotland and probably also cross the Atlantic from
the Canaries via the Cape Verde islands later the same
year.  Depending on how well that goes, maybe return to
Europe after a season in the Caribbean or start a slow
odyssey across the Pacific, maybe even living longer per
year aboard.  Adding a SCUBA compressor before the
Caribbean is also on the list.

I am still in 2 minds about replacing what
appears to be good standing rigging, but yes if it should be
done while I am the boat custodian then rather sooner than
later.  I'll think about it for a year.

I printed out the 7 pages and
am going through every suggestion in detail, and learning a
lot along the way.  Many thanks for dedicating some time to
guide me.  I hope to be able to repay it some day!

By the way, I have 80m chain
that is 10mm, plus another 8m 10mm chain for the second
anchor.  I'll keep the CQR as a stern anchor when
necessary.  And I'll probably not buy a storm sail; a
bit of genoa and mizzen should do it from the safety of the
cockpit.

Eamonn
SM #151 Travel Bug









#yiv7886424109 #yiv7886424109 --
#yiv7886424109ygrp-mkp {
border:1px solid #d8d8d8;font-family:Arial;margin:10px
0;padding:0 10px;}

#yiv7886424109 #yiv7886424109ygrp-mkp hr {
border:1px solid #d8d8d8;}

#yiv7886424109 #yiv7886424109ygrp-mkp #yiv7886424109hd {
color:#628c2a;font-size:85%;font-weight:700;line-height:122%;margin:10px
0;}

#yiv7886424109 #yiv7886424109ygrp-mkp #yiv7886424109ads {
margin-bottom:10px;}

#yiv7886424109 #yiv7886424109ygrp-mkp .yiv7886424109ad {
padding:0 0;}

#yiv7886424109 #yiv7886424109ygrp-mkp .yiv7886424109ad p {
margin:0;}

#yiv7886424109 #yiv7886424109ygrp-mkp .yiv7886424109ad a {
color:#0000ff;text-decoration:none;}
#yiv7886424109 #yiv7886424109ygrp-sponsor
#yiv7886424109ygrp-lc {
font-family:Arial;}

#yiv7886424109 #yiv7886424109ygrp-sponsor
#yiv7886424109ygrp-lc #yiv7886424109hd {
margin:10px
0px;font-weight:700;font-size:78%;line-height:122%;}

#yiv7886424109 #yiv7886424109ygrp-sponsor
#yiv7886424109ygrp-lc .yiv7886424109ad {
margin-bottom:10px;padding:0 0;}

#yiv7886424109 #yiv7886424109actions {
font-family:Verdana;font-size:11px;padding:10px 0;}

#yiv7886424109 #yiv7886424109activity {
background-color:#e0ecee;float:left;font-family:Verdana;font-size:10px;padding:10px;}

#yiv7886424109 #yiv7886424109activity span {
font-weight:700;}

#yiv7886424109 #yiv7886424109activity span:first-child {
text-transform:uppercase;}

#yiv7886424109 #yiv7886424109activity span a {
color:#5085b6;text-decoration:none;}

#yiv7886424109 #yiv7886424109activity span span {
color:#ff7900;}

#yiv7886424109 #yiv7886424109activity span
.yiv7886424109underline {
text-decoration:underline;}

#yiv7886424109 .yiv7886424109attach {
clear:both;display:table;font-family:Arial;font-size:12px;padding:10px
0;width:400px;}

#yiv7886424109 .yiv7886424109attach div a {
text-decoration:none;}

#yiv7886424109 .yiv7886424109attach img {
border:none;padding-right:5px;}

#yiv7886424109 .yiv7886424109attach label {
display:block;margin-bottom:5px;}

#yiv7886424109 .yiv7886424109attach label a {
text-decoration:none;}

#yiv7886424109 blockquote {
margin:0 0 0 4px;}

#yiv7886424109 .yiv7886424109bold {
font-family:Arial;font-size:13px;font-weight:700;}

#yiv7886424109 .yiv7886424109bold a {
text-decoration:none;}

#yiv7886424109 dd.yiv7886424109last p a {
font-family:Verdana;font-weight:700;}

#yiv7886424109 dd.yiv7886424109last p span {
margin-right:10px;font-family:Verdana;font-weight:700;}

#yiv7886424109 dd.yiv7886424109last p
span.yiv7886424109yshortcuts {
margin-right:0;}

#yiv7886424109 div.yiv7886424109attach-table div div a {
text-decoration:none;}

#yiv7886424109 div.yiv7886424109attach-table {
width:400px;}

#yiv7886424109 div.yiv7886424109file-title a, #yiv7886424109
div.yiv7886424109file-title a:active, #yiv7886424109
div.yiv7886424109file-title a:hover, #yiv7886424109
div.yiv7886424109file-title a:visited {
text-decoration:none;}

#yiv7886424109 div.yiv7886424109photo-title a,
#yiv7886424109 div.yiv7886424109photo-title a:active,
#yiv7886424109 div.yiv7886424109photo-title a:hover,
#yiv7886424109 div.yiv7886424109photo-title a:visited {
text-decoration:none;}

#yiv7886424109 div#yiv7886424109ygrp-mlmsg
#yiv7886424109ygrp-msg p a span.yiv7886424109yshortcuts {
font-family:Verdana;font-size:10px;font-weight:normal;}

#yiv7886424109 .yiv7886424109green {
color:#628c2a;}

#yiv7886424109 .yiv7886424109MsoNormal {
margin:0 0 0 0;}

#yiv7886424109 o {
font-size:0;}

#yiv7886424109 #yiv7886424109photos div {
float:left;width:72px;}

#yiv7886424109 #yiv7886424109photos div div {
border:1px solid
#666666;height:62px;overflow:hidden;width:62px;}

#yiv7886424109 #yiv7886424109photos div label {
color:#666666;font-size:10px;overflow:hidden;text-align:center;white-space:nowrap;width:64px;}

#yiv7886424109 #yiv7886424109reco-category {
font-size:77%;}

#yiv7886424109 #yiv7886424109reco-desc {
font-size:77%;}

#yiv7886424109 .yiv7886424109replbq {
margin:4px;}

#yiv7886424109 #yiv7886424109ygrp-actbar div a:first-child {
margin-right:2px;padding-right:5px;}

#yiv7886424109 #yiv7886424109ygrp-mlmsg {
font-size:13px;font-family:Arial, helvetica, clean,
sans-serif;}

#yiv7886424109 #yiv7886424109ygrp-mlmsg table {
font-size:inherit;font:100%;}

#yiv7886424109 #yiv7886424109ygrp-mlmsg select,
#yiv7886424109 input, #yiv7886424109 textarea {
font:99% Arial, Helvetica, clean, sans-serif;}

#yiv7886424109 #yiv7886424109ygrp-mlmsg pre, #yiv7886424109
code {
font:115% monospace;}

#yiv7886424109 #yiv7886424109ygrp-mlmsg * {
line-height:1.22em;}

#yiv7886424109 #yiv7886424109ygrp-mlmsg #yiv7886424109logo {
padding-bottom:10px;}


#yiv7886424109 #yiv7886424109ygrp-msg p a {
font-family:Verdana;}

#yiv7886424109 #yiv7886424109ygrp-msg
p#yiv7886424109attach-count span {
color:#1E66AE;font-weight:700;}

#yiv7886424109 #yiv7886424109ygrp-reco
#yiv7886424109reco-head {
color:#ff7900;font-weight:700;}

#yiv7886424109 #yiv7886424109ygrp-reco {
margin-bottom:20px;padding:0px;}

#yiv7886424109 #yiv7886424109ygrp-sponsor #yiv7886424109ov
li a {
font-size:130%;text-decoration:none;}

#yiv7886424109 #yiv7886424109ygrp-sponsor #yiv7886424109ov
li {
font-size:77%;list-style-type:square;padding:6px 0;}

#yiv7886424109 #yiv7886424109ygrp-sponsor #yiv7886424109ov
ul {
margin:0;padding:0 0 0 8px;}

#yiv7886424109 #yiv7886424109ygrp-text {
font-family:Georgia;}

#yiv7886424109 #yiv7886424109ygrp-text p {
margin:0 0 1em 0;}

#yiv7886424109 #yiv7886424109ygrp-text tt {
font-size:120%;}

#yiv7886424109 #yiv7886424109ygrp-vital ul li:last-child {
border-right:none !important;
}
#yiv7886424109


Re: [Amel Yacht Owners] Steaming light & mast climbing

Joe Nance
 

Thank you guys for the great information,,, Much appreciated!!


Re: [Amel Yacht Owners] electrolysis on mast/boom connection

eric freedman
 

I have used a grease like substance that hardens with age called Duralac. It is available on ebay.

It is amazing stuff. I have been using it on boats since 1995.

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Monday, December 21, 2015 11:08 AM
To: amelyachtowners@...
Subject: Re: [Amel Yacht Owners] electrolysis on mast/boom connection

 

 

Yes I v heard about it and will try, will also try to put a ground wire to the bolt
Paul SY KERPA SM 259


Re: FW: [Amel Yacht Owners] Base for Tricolor & Anchor light Legrand 55152 55632

eric freedman
 

I had my aquasignal tricolor and strobe rebuilt by a fellow in Florida with LED’S.

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Monday, December 21, 2015 10:33 AM
To: amelyachtowners@...
Subject: Re: FW: [Amel Yacht Owners] Base for Tricolor & Anchor light Legrand 55152 55632

 

 

Good morning Mark,

Sorry been late reading the post.
I end up purchasing a different Aqua Signal light than yours.
I have one with traditional light, which I will replace with LED.
But thanks for the update.

Sincerely, Alexandre
SM2K #289 NIKIMAT
Blue Haven Marina, Turks & Caicos

--------------------------------------------
On Thu, 12/10/15, 'Mark Erdos' mcerdos@... [amelyachtowners] <amelyachtowners@...> wrote:

Subject: FW: [Amel Yacht Owners] Base for Tricolor & Anchor light Legrand 55152 55632
To: amelyachtowners@...
Date: Thursday, December 10, 2015, 10:36 AM


 









Alexandre      
 I hope you haven’t purchased this
yet. Our second unit inside of 6 months has now failed. The
anchor light works. The tri-color unit lights up when first
powered on and after about 2 seconds shuts off. I haven’t
pulled the unit from the mast top yet. But, I do have
voltage going to the connections at bottom of the
mast.  I will be contacting Aqua-Signal for
a warranty replacement, again. This unit is really a piece
of crap. It is scary to think our safety is dependent on a
product/company with such poor QA standards.
     With best
regards,  Mark  Super Maramu
2000Hull
#275www.creampuff.usCurrently
cruising:  Green Turtle Cay, Bahamas
 From: Mark Erdos
[mailto:mcerdos@...]
Sent:
Thursday, November 12, 2015 11:05 PM
To:
'amelyachtowners@...'
Subject: RE: [Amel Yacht Owners] Base
for Tricolor & Anchor light Legrand 55152
55632  Hi Alexandre,
 I hope you are doing well. I see you
are in the Bahamas. We are heading there in a few days. I
hope we can meet. We will be going at it backwards and
working our way from North to South.
 When we purchased Cream Puff, it had
the original Guest tri-color fitting. It failed after 15
years of being in the sun. When I removed it the unit
crumbled in my hands. It was amazing it still lit up. It was
also very corroded inside. We searched all over for a
comparable fitting but I believe Guest is no longer making
lights.  We replaced the unit with one  I
purchased from Defender: mast-top tri-color w/Anchor light
Series 34 LED model 34706-7 http://www.defender.com/product.jsp?path=-1%7C65136%7C2312550%7C2312561&id=2113738 
This was a recommendation from Bill Rouse. I believe Amel
switch to these units on later models when they installed
the LED.  The unit will take 12 or 24 v. I used
the existing wiring and just made the 3 connections. I cut
back the wire to ensure I had a new clean connection. I had
to install a new base for the new fixture. It involved
drilling new holes in the mast top and tapping the holes for
stainless steel screws (I purchased separately). At the top
of the mast, there is a common neg and a pos for the anchor
light and a pos for the tri-color. These wires are connected
to the new base and the light unit plugs into the
base.  The unit I purchased failed within a
couple of months. Aqua-signal replaced it and even paid
shipping for the return of the old unit. So far, the
replacement has been trouble free.
 Hope this
helps.  With best
regards,  Mark  Super Maramu
2000Hull
#275www.creampuff.usCurrently
cruising:  St Augustine FL









#yiv5401322543 #yiv5401322543 --
#yiv5401322543ygrp-mkp {
border:1px solid #d8d8d8;font-family:Arial;margin:10px
0;padding:0 10px;}

#yiv5401322543 #yiv5401322543ygrp-mkp hr {
border:1px solid #d8d8d8;}

#yiv5401322543 #yiv5401322543ygrp-mkp #yiv5401322543hd {
color:#628c2a;font-size:85%;font-weight:700;line-height:122%;margin:10px
0;}

#yiv5401322543 #yiv5401322543ygrp-mkp #yiv5401322543ads {
margin-bottom:10px;}

#yiv5401322543 #yiv5401322543ygrp-mkp .yiv5401322543ad {
padding:0 0;}

#yiv5401322543 #yiv5401322543ygrp-mkp .yiv5401322543ad p {
margin:0;}

#yiv5401322543 #yiv5401322543ygrp-mkp .yiv5401322543ad a {
color:#0000ff;text-decoration:none;}
#yiv5401322543 #yiv5401322543ygrp-sponsor
#yiv5401322543ygrp-lc {
font-family:Arial;}

#yiv5401322543 #yiv5401322543ygrp-sponsor
#yiv5401322543ygrp-lc #yiv5401322543hd {
margin:10px
0px;font-weight:700;font-size:78%;line-height:122%;}

#yiv5401322543 #yiv5401322543ygrp-sponsor
#yiv5401322543ygrp-lc .yiv5401322543ad {
margin-bottom:10px;padding:0 0;}

#yiv5401322543 #yiv5401322543actions {
font-family:Verdana;font-size:11px;padding:10px 0;}

#yiv5401322543 #yiv5401322543activity {
background-color:#e0ecee;float:left;font-family:Verdana;font-size:10px;padding:10px;}

#yiv5401322543 #yiv5401322543activity span {
font-weight:700;}

#yiv5401322543 #yiv5401322543activity span:first-child {
text-transform:uppercase;}

#yiv5401322543 #yiv5401322543activity span a {
color:#5085b6;text-decoration:none;}

#yiv5401322543 #yiv5401322543activity span span {
color:#ff7900;}

#yiv5401322543 #yiv5401322543activity span
.yiv5401322543underline {
text-decoration:underline;}

#yiv5401322543 .yiv5401322543attach {
clear:both;display:table;font-family:Arial;font-size:12px;padding:10px
0;width:400px;}

#yiv5401322543 .yiv5401322543attach div a {
text-decoration:none;}

#yiv5401322543 .yiv5401322543attach img {
border:none;padding-right:5px;}

#yiv5401322543 .yiv5401322543attach label {
display:block;margin-bottom:5px;}

#yiv5401322543 .yiv5401322543attach label a {
text-decoration:none;}

#yiv5401322543 blockquote {
margin:0 0 0 4px;}

#yiv5401322543 .yiv5401322543bold {
font-family:Arial;font-size:13px;font-weight:700;}

#yiv5401322543 .yiv5401322543bold a {
text-decoration:none;}

#yiv5401322543 dd.yiv5401322543last p a {
font-family:Verdana;font-weight:700;}

#yiv5401322543 dd.yiv5401322543last p span {
margin-right:10px;font-family:Verdana;font-weight:700;}

#yiv5401322543 dd.yiv5401322543last p
span.yiv5401322543yshortcuts {
margin-right:0;}

#yiv5401322543 div.yiv5401322543attach-table div div a {
text-decoration:none;}

#yiv5401322543 div.yiv5401322543attach-table {
width:400px;}

#yiv5401322543 div.yiv5401322543file-title a, #yiv5401322543
div.yiv5401322543file-title a:active, #yiv5401322543
div.yiv5401322543file-title a:hover, #yiv5401322543
div.yiv5401322543file-title a:visited {
text-decoration:none;}

#yiv5401322543 div.yiv5401322543photo-title a,
#yiv5401322543 div.yiv5401322543photo-title a:active,
#yiv5401322543 div.yiv5401322543photo-title a:hover,
#yiv5401322543 div.yiv5401322543photo-title a:visited {
text-decoration:none;}

#yiv5401322543 div#yiv5401322543ygrp-mlmsg
#yiv5401322543ygrp-msg p a span.yiv5401322543yshortcuts {
font-family:Verdana;font-size:10px;font-weight:normal;}

#yiv5401322543 .yiv5401322543green {
color:#628c2a;}

#yiv5401322543 .yiv5401322543MsoNormal {
margin:0 0 0 0;}

#yiv5401322543 o {
font-size:0;}

#yiv5401322543 #yiv5401322543photos div {
float:left;width:72px;}

#yiv5401322543 #yiv5401322543photos div div {
border:1px solid
#666666;height:62px;overflow:hidden;width:62px;}

#yiv5401322543 #yiv5401322543photos div label {
color:#666666;font-size:10px;overflow:hidden;text-align:center;white-space:nowrap;width:64px;}

#yiv5401322543 #yiv5401322543reco-category {
font-size:77%;}

#yiv5401322543 #yiv5401322543reco-desc {
font-size:77%;}

#yiv5401322543 .yiv5401322543replbq {
margin:4px;}

#yiv5401322543 #yiv5401322543ygrp-actbar div a:first-child {
margin-right:2px;padding-right:5px;}

#yiv5401322543 #yiv5401322543ygrp-mlmsg {
font-size:13px;font-family:Arial, helvetica, clean,
sans-serif;}

#yiv5401322543 #yiv5401322543ygrp-mlmsg table {
font-size:inherit;font:100%;}

#yiv5401322543 #yiv5401322543ygrp-mlmsg select,
#yiv5401322543 input, #yiv5401322543 textarea {
font:99% Arial, Helvetica, clean, sans-serif;}

#yiv5401322543 #yiv5401322543ygrp-mlmsg pre, #yiv5401322543
code {
font:115% monospace;}

#yiv5401322543 #yiv5401322543ygrp-mlmsg * {
line-height:1.22em;}

#yiv5401322543 #yiv5401322543ygrp-mlmsg #yiv5401322543logo {
padding-bottom:10px;}


#yiv5401322543 #yiv5401322543ygrp-msg p a {
font-family:Verdana;}

#yiv5401322543 #yiv5401322543ygrp-msg
p#yiv5401322543attach-count span {
color:#1E66AE;font-weight:700;}

#yiv5401322543 #yiv5401322543ygrp-reco
#yiv5401322543reco-head {
color:#ff7900;font-weight:700;}

#yiv5401322543 #yiv5401322543ygrp-reco {
margin-bottom:20px;padding:0px;}

#yiv5401322543 #yiv5401322543ygrp-sponsor #yiv5401322543ov
li a {
font-size:130%;text-decoration:none;}

#yiv5401322543 #yiv5401322543ygrp-sponsor #yiv5401322543ov
li {
font-size:77%;list-style-type:square;padding:6px 0;}

#yiv5401322543 #yiv5401322543ygrp-sponsor #yiv5401322543ov
ul {
margin:0;padding:0 0 0 8px;}

#yiv5401322543 #yiv5401322543ygrp-text {
font-family:Georgia;}

#yiv5401322543 #yiv5401322543ygrp-text p {
margin:0 0 1em 0;}

#yiv5401322543 #yiv5401322543ygrp-text tt {
font-size:120%;}

#yiv5401322543 #yiv5401322543ygrp-vital ul li:last-child {
border-right:none !important;
}
#yiv5401322543


Re: [Amel Yacht Owners] electrolysis on mast/boom connection

Paul Osterberg
 

Yes I v heard about it and will try, will also try to put a ground wire to the bolt
Paul SY KERPA SM 259


Re: FW: [Amel Yacht Owners] Base for Tricolor & Anchor light Legrand 55152 55632

Alexandre Uster von Baar
 

Good morning Mark,

Sorry been late reading the post.
I end up purchasing a different Aqua Signal light than yours.
I have one with traditional light, which I will replace with LED.
But thanks for the update.

Sincerely, Alexandre
SM2K #289 NIKIMAT
Blue Haven Marina, Turks & Caicos




--------------------------------------------

On Thu, 12/10/15, 'Mark Erdos' mcerdos@... [amelyachtowners] <amelyachtowners@...> wrote:

Subject: FW: [Amel Yacht Owners] Base for Tricolor & Anchor light Legrand 55152 55632
To: amelyachtowners@...
Date: Thursday, December 10, 2015, 10:36 AM


 









Alexandre      
 I hope you haven’t purchased this
yet. Our second unit inside of 6 months has now failed. The
anchor light works. The tri-color unit lights up when first
powered on and after about 2 seconds shuts off. I haven’t
pulled the unit from the mast top yet. But, I do have
voltage going to the connections at bottom of the
mast.  I will be contacting Aqua-Signal for
a warranty replacement, again. This unit is really a piece
of crap. It is scary to think our safety is dependent on a
product/company with such poor QA standards.
     With best
regards,  Mark  Super Maramu
2000Hull
#275www.creampuff.usCurrently
cruising:  Green Turtle Cay, Bahamas
 From: Mark Erdos
[mailto:mcerdos@...]
Sent:
Thursday, November 12, 2015 11:05 PM
To:
'amelyachtowners@...'
Subject: RE: [Amel Yacht Owners] Base
for Tricolor & Anchor light Legrand 55152
55632  Hi Alexandre,
 I hope you are doing well. I see you
are in the Bahamas. We are heading there in a few days. I
hope we can meet. We will be going at it backwards and
working our way from North to South.
 When we purchased Cream Puff, it had
the original Guest tri-color fitting. It failed after 15
years of being in the sun. When I removed it the unit
crumbled in my hands. It was amazing it still lit up. It was
also very corroded inside. We searched all over for a
comparable fitting but I believe Guest is no longer making
lights.  We replaced the unit with one  I
purchased from Defender: mast-top tri-color w/Anchor light
Series 34 LED model 34706-7 http://www.defender.com/product.jsp?path=-1%7C65136%7C2312550%7C2312561&id=2113738 
This was a recommendation from Bill Rouse. I believe Amel
switch to these units on later models when they installed
the LED.  The unit will take 12 or 24 v. I used
the existing wiring and just made the 3 connections. I cut
back the wire to ensure I had a new clean connection. I had
to install a new base for the new fixture. It involved
drilling new holes in the mast top and tapping the holes for
stainless steel screws (I purchased separately). At the top
of the mast, there is a common neg and a pos for the anchor
light and a pos for the tri-color. These wires are connected
to the new base and the light unit plugs into the
base.  The unit I purchased failed within a
couple of months. Aqua-signal replaced it and even paid
shipping for the return of the old unit. So far, the
replacement has been trouble free.
 Hope this
helps.  With best
regards,  Mark  Super Maramu
2000Hull
#275www.creampuff.usCurrently
cruising:  St Augustine FL









#yiv5401322543 #yiv5401322543 --
#yiv5401322543ygrp-mkp {
border:1px solid #d8d8d8;font-family:Arial;margin:10px
0;padding:0 10px;}

#yiv5401322543 #yiv5401322543ygrp-mkp hr {
border:1px solid #d8d8d8;}

#yiv5401322543 #yiv5401322543ygrp-mkp #yiv5401322543hd {
color:#628c2a;font-size:85%;font-weight:700;line-height:122%;margin:10px
0;}

#yiv5401322543 #yiv5401322543ygrp-mkp #yiv5401322543ads {
margin-bottom:10px;}

#yiv5401322543 #yiv5401322543ygrp-mkp .yiv5401322543ad {
padding:0 0;}

#yiv5401322543 #yiv5401322543ygrp-mkp .yiv5401322543ad p {
margin:0;}

#yiv5401322543 #yiv5401322543ygrp-mkp .yiv5401322543ad a {
color:#0000ff;text-decoration:none;}
#yiv5401322543 #yiv5401322543ygrp-sponsor
#yiv5401322543ygrp-lc {
font-family:Arial;}

#yiv5401322543 #yiv5401322543ygrp-sponsor
#yiv5401322543ygrp-lc #yiv5401322543hd {
margin:10px
0px;font-weight:700;font-size:78%;line-height:122%;}

#yiv5401322543 #yiv5401322543ygrp-sponsor
#yiv5401322543ygrp-lc .yiv5401322543ad {
margin-bottom:10px;padding:0 0;}

#yiv5401322543 #yiv5401322543actions {
font-family:Verdana;font-size:11px;padding:10px 0;}

#yiv5401322543 #yiv5401322543activity {
background-color:#e0ecee;float:left;font-family:Verdana;font-size:10px;padding:10px;}

#yiv5401322543 #yiv5401322543activity span {
font-weight:700;}

#yiv5401322543 #yiv5401322543activity span:first-child {
text-transform:uppercase;}

#yiv5401322543 #yiv5401322543activity span a {
color:#5085b6;text-decoration:none;}

#yiv5401322543 #yiv5401322543activity span span {
color:#ff7900;}

#yiv5401322543 #yiv5401322543activity span
.yiv5401322543underline {
text-decoration:underline;}

#yiv5401322543 .yiv5401322543attach {
clear:both;display:table;font-family:Arial;font-size:12px;padding:10px
0;width:400px;}

#yiv5401322543 .yiv5401322543attach div a {
text-decoration:none;}

#yiv5401322543 .yiv5401322543attach img {
border:none;padding-right:5px;}

#yiv5401322543 .yiv5401322543attach label {
display:block;margin-bottom:5px;}

#yiv5401322543 .yiv5401322543attach label a {
text-decoration:none;}

#yiv5401322543 blockquote {
margin:0 0 0 4px;}

#yiv5401322543 .yiv5401322543bold {
font-family:Arial;font-size:13px;font-weight:700;}

#yiv5401322543 .yiv5401322543bold a {
text-decoration:none;}

#yiv5401322543 dd.yiv5401322543last p a {
font-family:Verdana;font-weight:700;}

#yiv5401322543 dd.yiv5401322543last p span {
margin-right:10px;font-family:Verdana;font-weight:700;}

#yiv5401322543 dd.yiv5401322543last p
span.yiv5401322543yshortcuts {
margin-right:0;}

#yiv5401322543 div.yiv5401322543attach-table div div a {
text-decoration:none;}

#yiv5401322543 div.yiv5401322543attach-table {
width:400px;}

#yiv5401322543 div.yiv5401322543file-title a, #yiv5401322543
div.yiv5401322543file-title a:active, #yiv5401322543
div.yiv5401322543file-title a:hover, #yiv5401322543
div.yiv5401322543file-title a:visited {
text-decoration:none;}

#yiv5401322543 div.yiv5401322543photo-title a,
#yiv5401322543 div.yiv5401322543photo-title a:active,
#yiv5401322543 div.yiv5401322543photo-title a:hover,
#yiv5401322543 div.yiv5401322543photo-title a:visited {
text-decoration:none;}

#yiv5401322543 div#yiv5401322543ygrp-mlmsg
#yiv5401322543ygrp-msg p a span.yiv5401322543yshortcuts {
font-family:Verdana;font-size:10px;font-weight:normal;}

#yiv5401322543 .yiv5401322543green {
color:#628c2a;}

#yiv5401322543 .yiv5401322543MsoNormal {
margin:0 0 0 0;}

#yiv5401322543 o {
font-size:0;}

#yiv5401322543 #yiv5401322543photos div {
float:left;width:72px;}

#yiv5401322543 #yiv5401322543photos div div {
border:1px solid
#666666;height:62px;overflow:hidden;width:62px;}

#yiv5401322543 #yiv5401322543photos div label {
color:#666666;font-size:10px;overflow:hidden;text-align:center;white-space:nowrap;width:64px;}

#yiv5401322543 #yiv5401322543reco-category {
font-size:77%;}

#yiv5401322543 #yiv5401322543reco-desc {
font-size:77%;}

#yiv5401322543 .yiv5401322543replbq {
margin:4px;}

#yiv5401322543 #yiv5401322543ygrp-actbar div a:first-child {
margin-right:2px;padding-right:5px;}

#yiv5401322543 #yiv5401322543ygrp-mlmsg {
font-size:13px;font-family:Arial, helvetica, clean,
sans-serif;}

#yiv5401322543 #yiv5401322543ygrp-mlmsg table {
font-size:inherit;font:100%;}

#yiv5401322543 #yiv5401322543ygrp-mlmsg select,
#yiv5401322543 input, #yiv5401322543 textarea {
font:99% Arial, Helvetica, clean, sans-serif;}

#yiv5401322543 #yiv5401322543ygrp-mlmsg pre, #yiv5401322543
code {
font:115% monospace;}

#yiv5401322543 #yiv5401322543ygrp-mlmsg * {
line-height:1.22em;}

#yiv5401322543 #yiv5401322543ygrp-mlmsg #yiv5401322543logo {
padding-bottom:10px;}


#yiv5401322543 #yiv5401322543ygrp-msg p a {
font-family:Verdana;}

#yiv5401322543 #yiv5401322543ygrp-msg
p#yiv5401322543attach-count span {
color:#1E66AE;font-weight:700;}

#yiv5401322543 #yiv5401322543ygrp-reco
#yiv5401322543reco-head {
color:#ff7900;font-weight:700;}

#yiv5401322543 #yiv5401322543ygrp-reco {
margin-bottom:20px;padding:0px;}

#yiv5401322543 #yiv5401322543ygrp-sponsor #yiv5401322543ov
li a {
font-size:130%;text-decoration:none;}

#yiv5401322543 #yiv5401322543ygrp-sponsor #yiv5401322543ov
li {
font-size:77%;list-style-type:square;padding:6px 0;}

#yiv5401322543 #yiv5401322543ygrp-sponsor #yiv5401322543ov
ul {
margin:0;padding:0 0 0 8px;}

#yiv5401322543 #yiv5401322543ygrp-text {
font-family:Georgia;}

#yiv5401322543 #yiv5401322543ygrp-text p {
margin:0 0 1em 0;}

#yiv5401322543 #yiv5401322543ygrp-text tt {
font-size:120%;}

#yiv5401322543 #yiv5401322543ygrp-vital ul li:last-child {
border-right:none !important;
}
#yiv5401322543


Re: [Amel Yacht Owners] Re: Gas Struts for engine cover

Alexandre Uster von Baar
 

Sorry have been busy, running behind reading and replying Amel message.
Thanks Kent for replying.

Sincerely, Alexandre
SM2K #289 NIKIMAT
Blue Haven Marina, Turks & Caicos



--------------------------------------------

On Sun, 12/20/15, Kent Robertson karkauai@... [amelyachtowners] <amelyachtowners@...> wrote:

Subject: Re: [Amel Yacht Owners] Re: Gas Struts for engine cover
To: "amelyachtowners@..." <amelyachtowners@...>
Date: Sunday, December 20, 2015, 5:42 PM


 









Message 18490, Eric.Kent
On Dec 20,
2015, at 4:20 PM, sailormon kimberlite@...
[amelyachtowners] <amelyachtowners@...>
wrote:
















 






Hi
Alexandre,I seem to have missed
the post where you mentioned the source for the gas
struts.Would you mind posting
it again.Fair
WindsEric  Kimberlite Amel Super
Maramu #376  
 From: amelyachtowners@...
[mailto:amelyachtowners@...]

Sent: Sunday, December 20, 2015
11:37 AM
To: amelyachtowners@...
Subject: Re: [Amel Yacht Owners] Re: Gas
Struts for engine cover    Thanks for this,
Alexandre,
I just ordered them from Bansbach
and they are now in stock and $74US each plus shipping.
Kent
SM 243
Kristy






















#yiv9738041598 #yiv9738041598 --
#yiv9738041598ygrp-mkp {
border:1px solid #d8d8d8;font-family:Arial;margin:10px
0;padding:0 10px;}

#yiv9738041598 #yiv9738041598ygrp-mkp hr {
border:1px solid #d8d8d8;}

#yiv9738041598 #yiv9738041598ygrp-mkp #yiv9738041598hd {
color:#628c2a;font-size:85%;font-weight:700;line-height:122%;margin:10px
0;}

#yiv9738041598 #yiv9738041598ygrp-mkp #yiv9738041598ads {
margin-bottom:10px;}

#yiv9738041598 #yiv9738041598ygrp-mkp .yiv9738041598ad {
padding:0 0;}

#yiv9738041598 #yiv9738041598ygrp-mkp .yiv9738041598ad p {
margin:0;}

#yiv9738041598 #yiv9738041598ygrp-mkp .yiv9738041598ad a {
color:#0000ff;text-decoration:none;}
#yiv9738041598 #yiv9738041598ygrp-sponsor
#yiv9738041598ygrp-lc {
font-family:Arial;}

#yiv9738041598 #yiv9738041598ygrp-sponsor
#yiv9738041598ygrp-lc #yiv9738041598hd {
margin:10px
0px;font-weight:700;font-size:78%;line-height:122%;}

#yiv9738041598 #yiv9738041598ygrp-sponsor
#yiv9738041598ygrp-lc .yiv9738041598ad {
margin-bottom:10px;padding:0 0;}

#yiv9738041598 #yiv9738041598actions {
font-family:Verdana;font-size:11px;padding:10px 0;}

#yiv9738041598 #yiv9738041598activity {
background-color:#e0ecee;float:left;font-family:Verdana;font-size:10px;padding:10px;}

#yiv9738041598 #yiv9738041598activity span {
font-weight:700;}

#yiv9738041598 #yiv9738041598activity span:first-child {
text-transform:uppercase;}

#yiv9738041598 #yiv9738041598activity span a {
color:#5085b6;text-decoration:none;}

#yiv9738041598 #yiv9738041598activity span span {
color:#ff7900;}

#yiv9738041598 #yiv9738041598activity span
.yiv9738041598underline {
text-decoration:underline;}

#yiv9738041598 .yiv9738041598attach {
clear:both;display:table;font-family:Arial;font-size:12px;padding:10px
0;width:400px;}

#yiv9738041598 .yiv9738041598attach div a {
text-decoration:none;}

#yiv9738041598 .yiv9738041598attach img {
border:none;padding-right:5px;}

#yiv9738041598 .yiv9738041598attach label {
display:block;margin-bottom:5px;}

#yiv9738041598 .yiv9738041598attach label a {
text-decoration:none;}

#yiv9738041598 blockquote {
margin:0 0 0 4px;}

#yiv9738041598 .yiv9738041598bold {
font-family:Arial;font-size:13px;font-weight:700;}

#yiv9738041598 .yiv9738041598bold a {
text-decoration:none;}

#yiv9738041598 dd.yiv9738041598last p a {
font-family:Verdana;font-weight:700;}

#yiv9738041598 dd.yiv9738041598last p span {
margin-right:10px;font-family:Verdana;font-weight:700;}

#yiv9738041598 dd.yiv9738041598last p
span.yiv9738041598yshortcuts {
margin-right:0;}

#yiv9738041598 div.yiv9738041598attach-table div div a {
text-decoration:none;}

#yiv9738041598 div.yiv9738041598attach-table {
width:400px;}

#yiv9738041598 div.yiv9738041598file-title a, #yiv9738041598
div.yiv9738041598file-title a:active, #yiv9738041598
div.yiv9738041598file-title a:hover, #yiv9738041598
div.yiv9738041598file-title a:visited {
text-decoration:none;}

#yiv9738041598 div.yiv9738041598photo-title a,
#yiv9738041598 div.yiv9738041598photo-title a:active,
#yiv9738041598 div.yiv9738041598photo-title a:hover,
#yiv9738041598 div.yiv9738041598photo-title a:visited {
text-decoration:none;}

#yiv9738041598 div#yiv9738041598ygrp-mlmsg
#yiv9738041598ygrp-msg p a span.yiv9738041598yshortcuts {
font-family:Verdana;font-size:10px;font-weight:normal;}

#yiv9738041598 .yiv9738041598green {
color:#628c2a;}

#yiv9738041598 .yiv9738041598MsoNormal {
margin:0 0 0 0;}

#yiv9738041598 o {
font-size:0;}

#yiv9738041598 #yiv9738041598photos div {
float:left;width:72px;}

#yiv9738041598 #yiv9738041598photos div div {
border:1px solid
#666666;height:62px;overflow:hidden;width:62px;}

#yiv9738041598 #yiv9738041598photos div label {
color:#666666;font-size:10px;overflow:hidden;text-align:center;white-space:nowrap;width:64px;}

#yiv9738041598 #yiv9738041598reco-category {
font-size:77%;}

#yiv9738041598 #yiv9738041598reco-desc {
font-size:77%;}

#yiv9738041598 .yiv9738041598replbq {
margin:4px;}

#yiv9738041598 #yiv9738041598ygrp-actbar div a:first-child {
margin-right:2px;padding-right:5px;}

#yiv9738041598 #yiv9738041598ygrp-mlmsg {
font-size:13px;font-family:Arial, helvetica, clean,
sans-serif;}

#yiv9738041598 #yiv9738041598ygrp-mlmsg table {
font-size:inherit;font:100%;}

#yiv9738041598 #yiv9738041598ygrp-mlmsg select,
#yiv9738041598 input, #yiv9738041598 textarea {
font:99% Arial, Helvetica, clean, sans-serif;}

#yiv9738041598 #yiv9738041598ygrp-mlmsg pre, #yiv9738041598
code {
font:115% monospace;}

#yiv9738041598 #yiv9738041598ygrp-mlmsg * {
line-height:1.22em;}

#yiv9738041598 #yiv9738041598ygrp-mlmsg #yiv9738041598logo {
padding-bottom:10px;}


#yiv9738041598 #yiv9738041598ygrp-msg p a {
font-family:Verdana;}

#yiv9738041598 #yiv9738041598ygrp-msg
p#yiv9738041598attach-count span {
color:#1E66AE;font-weight:700;}

#yiv9738041598 #yiv9738041598ygrp-reco
#yiv9738041598reco-head {
color:#ff7900;font-weight:700;}

#yiv9738041598 #yiv9738041598ygrp-reco {
margin-bottom:20px;padding:0px;}

#yiv9738041598 #yiv9738041598ygrp-sponsor #yiv9738041598ov
li a {
font-size:130%;text-decoration:none;}

#yiv9738041598 #yiv9738041598ygrp-sponsor #yiv9738041598ov
li {
font-size:77%;list-style-type:square;padding:6px 0;}

#yiv9738041598 #yiv9738041598ygrp-sponsor #yiv9738041598ov
ul {
margin:0;padding:0 0 0 8px;}

#yiv9738041598 #yiv9738041598ygrp-text {
font-family:Georgia;}

#yiv9738041598 #yiv9738041598ygrp-text p {
margin:0 0 1em 0;}

#yiv9738041598 #yiv9738041598ygrp-text tt {
font-size:120%;}

#yiv9738041598 #yiv9738041598ygrp-vital ul li:last-child {
border-right:none !important;
}
#yiv9738041598


Running Mon Marina, Freeport

Stephanie DiBelardino <stephiedib@...>
 

Hi All!

Charlton Knowles, the operator if Running Mon Marina, and my husband were just talking. Charlton told my husband he just hauled a 53 or 54 Amel. So, if there is an Amel owner on island, we would be more than happy to help however we can.

Fair Winds,
Stephanie
SM 353 Indecent


Re: [Amel Yacht Owners] Soft rigging for voyaging - Ocean Navigator - September 2010

Beaute Olivier
 

And so is the AMEL 55...

Merry Christmas All of you.

Olivier.


On Monday, December 21, 2015 4:12 AM, "sailormon kimberlite@... [amelyachtowners]" wrote:


 
Joel, in that case please order one for me.
Happy Holidays
Eric
 
 
From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Sunday, December 20, 2015 6:53 PM
To: amelyachtowners@...
Subject: RE: [Amel Yacht Owners] Soft rigging for voyaging - Ocean Navigator - September 2010
 
 
Hi Eric, the AMEL 64 has a hydraulic jack for the same purpose despite conventional rigging. Just FYI

All the Best, Joel

Joel F. Potter/Cruising Yacht Specialist LLC

THE EXPERIENCED AMEL GUY

954 462 5869 office

954 812 2485 cell

From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Sunday, December 20, 2015 5:08 PM
To: amelyachtowners@...
Subject: [Amel Yacht Owners] Soft rigging for voyaging - Ocean Navigator - September 2010

A friend of mine is rebuilding a Tartan for ocean sailing. He sent this article to me.

What are your opinions of this?

I was just on my friends Swan 66 with carbon fiber rigging on a 100+ foot mast.

Interestingly, to tighten the rigging there is a hydraulic jack at the base of the mast.

http://www.oceannavigator.com/July-August-2010/Soft-rigging-for-voyaging/

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

[Non-text portions of this message have been removed]



Re: [Amel Yacht Owners] Steaming light & mast climbing

eric freedman
 

With respect to hauling someone up the mast. I never put the line in the jaws of the electric  winch. If it runs away I have control, and my fingers.

As I mentioned I use the new vectran ballooner halyard .

Both are tied on to the bosuns chair with bowlines.

 

I installed the LED lamp that Alexandre suggested—it is a brilliant white light and should last a very long time

I used the smaller beam angle for the mast and the wider beam angle for the cockpit.

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

 

 

From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Monday, December 21, 2015 3:48 AM
To: amelyachtowners@...
Subject: Re: [Amel Yacht Owners] Steaming light & mast climbing

 

 

I like parts of almost everyone's response, but Joel's is the most complete response. 

 

Comments:

I always use an ascender on an external halyard that is also a safety/reserve line. I have a 16mm piece of line that I raise to the top of the mast and use an ATN ascender on that line for safety. (http://www.atninc.com/atn-ascender-sailing-equipment.shtml) Remember if something goes wrong with your primary hoist line, the ascender will automatically grip that safety halyard and save you...BUT, you will need the person on deck to lower you with that external halyard...be sure that you are rigged for this. 

 

With the ascender on a safety halyard, I believe that you can use the extra outside spinnaker halyard as the primary hoist halyard as Eric Freedman (KIMBERLITE) described with a primary electric winch...BUT, only if that halyard is long enough to route it back to a primary electric winch. If you do this, the person operating that winch needs to be fully experienced on how that electric winch works and how to cut it off if something happens and it begins to run-away. THIS IS VERY IMPORTANT. The easiest shut-down would be the two main battery switches outside the battery compartment. The small breaker on the 24VDC battery panel will NOT shut down a run-away.

 

Additional Info that you need:

The only thing that I will add is that your steaming light probably has a single retaining Phillips head screw on the middle of the bottom of the clear lens retainer. The top of the lens retainer is hinged with open plastic hinges...something that you can miss and break when removing...and because the two hinges are open on top, you can accidentally drop it...when it hits the deck it will break. So loosen the screw...it will loosen, but probably not come completely out...swing the lens enclosure upward and remove it...be sure that you have a small bucket or something to place it in while you change the bulb. The bulb is a 24VDC 25 watt bayonet twin pole bulb...very common for Nav lights and the same bulb as your original port/stbd Nav lights and your tricolor...the original anchor light and stern lights were same bulb, but 10 watt. 

 

If you have never replaced the clear lens on that steaming light, I am betting that it is very crazed...you might want to go up with a replacement lens. BTW, I recently replaced my steaming light clear lens and used just the clear lens (NOT the entire lens and retainer) out of a spare stern light...same lens.

 

One last comment: If you haven't replaced your Flood light, now is the time to do it...same fixture...50W GE #4505 28VDC.

 

I hope this helps you and good luck.

 

Bill

BeBe 387

 

 

 

On Mon, Dec 21, 2015 at 1:43 AM, Joe Nance cloudstreet100@... [amelyachtowners] <amelyachtowners@...> wrote:

 

Thanks to everyone for all of the great advice, help & explanations.

 

I plan on taking it slow & cautious.

 

I do have an Ascender and will definitely use it as well as a safety.

 

Trevor, I think you're right about the slapping line.  We lost the steaming light at about the same time that my topping lift broke loose with no main sail out.  It went flying everywhere!

 

Sure is nice to be a part of such a great group!

 

Joe

 


Re: [Amel Yacht Owners] Steaming light & mast climbing

Bill & Judy Rouse <yahoogroups@...>
 

I like parts of almost everyone's response, but Joel's is the most complete response. 

Comments:
I always use an ascender on an external halyard that is also a safety/reserve line. I have a 16mm piece of line that I raise to the top of the mast and use an ATN ascender on that line for safety. (http://www.atninc.com/atn-ascender-sailing-equipment.shtml) Remember if something goes wrong with your primary hoist line, the ascender will automatically grip that safety halyard and save you...BUT, you will need the person on deck to lower you with that external halyard...be sure that you are rigged for this. 

With the ascender on a safety halyard, I believe that you can use the extra outside spinnaker halyard as the primary hoist halyard as Eric Freedman (KIMBERLITE) described with a primary electric winch...BUT, only if that halyard is long enough to route it back to a primary electric winch. If you do this, the person operating that winch needs to be fully experienced on how that electric winch works and how to cut it off if something happens and it begins to run-away. THIS IS VERY IMPORTANT. The easiest shut-down would be the two main battery switches outside the battery compartment. The small breaker on the 24VDC battery panel will NOT shut down a run-away.

Additional Info that you need:
The only thing that I will add is that your steaming light probably has a single retaining Phillips head screw on the middle of the bottom of the clear lens retainer. The top of the lens retainer is hinged with open plastic hinges...something that you can miss and break when removing...and because the two hinges are open on top, you can accidentally drop it...when it hits the deck it will break. So loosen the screw...it will loosen, but probably not come completely out...swing the lens enclosure upward and remove it...be sure that you have a small bucket or something to place it in while you change the bulb. The bulb is a 24VDC 25 watt bayonet twin pole bulb...very common for Nav lights and the same bulb as your original port/stbd Nav lights and your tricolor...the original anchor light and stern lights were same bulb, but 10 watt. 

If you have never replaced the clear lens on that steaming light, I am betting that it is very crazed...you might want to go up with a replacement lens. BTW, I recently replaced my steaming light clear lens and used just the clear lens (NOT the entire lens and retainer) out of a spare stern light...same lens.

One last comment: If you haven't replaced your Flood light, now is the time to do it...same fixture...50W GE #4505 28VDC.

I hope this helps you and good luck.

Bill
BeBe 387



On Mon, Dec 21, 2015 at 1:43 AM, Joe Nance cloudstreet100@... [amelyachtowners] <amelyachtowners@...> wrote:
 

Thanks to everyone for all of the great advice, help & explanations.

I plan on taking it slow & cautious.

I do have an Ascender and will definitely use it as well as a safety.

Trevor, I think you're right about the slapping line.  We lost the steaming light at about the same time that my topping lift broke loose with no main sail out.  It went flying everywhere!

Sure is nice to be a part of such a great group!

Joe



Re: [Amel Yacht Owners] Soft rigging for voyaging - Ocean Navigator - September 2010

eric freedman
 

Joel, in that case please order one for me.

Happy Holidays

Eric

 

 

From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Sunday, December 20, 2015 6:53 PM
To: amelyachtowners@...
Subject: RE: [Amel Yacht Owners] Soft rigging for voyaging - Ocean Navigator - September 2010

 

 

Hi Eric, the AMEL 64 has a hydraulic jack for the same purpose despite conventional rigging. Just FYI

All the Best, Joel

Joel F. Potter/Cruising Yacht Specialist LLC

THE EXPERIENCED AMEL GUY

954 462 5869 office

954 812 2485 cell

From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Sunday, December 20, 2015 5:08 PM
To: amelyachtowners@...
Subject: [Amel Yacht Owners] Soft rigging for voyaging - Ocean Navigator - September 2010

A friend of mine is rebuilding a Tartan for ocean sailing. He sent this article to me.

What are your opinions of this?

I was just on my friends Swan 66 with carbon fiber rigging on a 100+ foot mast.

Interestingly, to tighten the rigging there is a hydraulic jack at the base of the mast.

http://www.oceannavigator.com/July-August-2010/Soft-rigging-for-voyaging/

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

[Non-text portions of this message have been removed]


Re: [Amel Yacht Owners] Re: Gas Struts for engine cover

eric freedman
 

Kent thanks

Eric

 

 

From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Sunday, December 20, 2015 6:43 PM
To: amelyachtowners@...
Subject: Re: [Amel Yacht Owners] Re: Gas Struts for engine cover

 

 

Message 18490, Eric.

Kent


On Dec 20, 2015, at 4:20 PM, sailormon kimberlite@... [amelyachtowners] <amelyachtowners@...> wrote:

 

Hi Alexandre,

I seem to have missed the post where you mentioned the source for the gas struts.

Would you mind posting it again.

Fair Winds

Eric

 

Kimberlite Amel Super Maramu #376

 

 

From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Sunday, December 20, 2015 11:37 AM
To: amelyachtowners@...
Subject: Re: [Amel Yacht Owners] Re: Gas Struts for engine cover

 

 

Thanks for this, Alexandre,
I just ordered them from Bansbach and they are now in stock and $74US each plus shipping.
Kent
SM 243
Kristy


Re: [Amel Yacht Owners] Steaming light & mast climbing

Joe Nance
 

Thanks to everyone for all of the great advice, help & explanations.

I plan on taking it slow & cautious.

I do have an Ascender and will definitely use it as well as a safety.

Trevor, I think you're right about the slapping line.  We lost the steaming light at about the same time that my topping lift broke loose with no main sail out.  It went flying everywhere!

Sure is nice to be a part of such a great group!

Joe


Re: [Amel Yacht Owners] Steaming light & mast climbing

seafeverofcuan
 

Joe, 
    The bulb is 25 Watt bayonet fitting, you need a fine Phillips screwdriver for the cover.

The most likely reason it has gone out is a halyard slapping close to the fitting.

If you are worried and unsure how to ascend the mast, pay a professional to change your bulb.

Glad to know that you bought decided on an Amel, you will never regret it.

Good luck.

Trevor

Seafever
SM 425
Mexico


Re: [Amel Yacht Owners] Soft rigging for voyaging - Ocean Navigator - September 2010

amelforme
 

Hi Eric, the AMEL 64 has a hydraulic jack for the same purpose despite conventional rigging. Just FYI



All the Best, Joel

Joel F. Potter/Cruising Yacht Specialist LLC

THE EXPERIENCED AMEL GUY

954 462 5869 office

954 812 2485 cell







From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Sunday, December 20, 2015 5:08 PM
To: amelyachtowners@...
Subject: [Amel Yacht Owners] Soft rigging for voyaging - Ocean Navigator - September 2010





A friend of mine is rebuilding a Tartan for ocean sailing. He sent this article to me.

What are your opinions of this?



I was just on my friends Swan 66 with carbon fiber rigging on a 100+ foot mast.

Interestingly, to tighten the rigging there is a hydraulic jack at the base of the mast.




http://www.oceannavigator.com/July-August-2010/Soft-rigging-for-voyaging/



Fair Winds

Eric

Kimberlite Amel Super Maramu #376














[Non-text portions of this message have been removed]


Re: [Amel Yacht Owners] Steaming light & mast climbing

amelforme
 

Hi Joe and congratulations on your first foreign landfall. Hope it’s the first of many.

I have put Paul Anstey up the mast of well over 150 Super Maramu’s during surveys over the years. Have yet to drop him! I will tell you how to do it but I’ll recommend you try a different way.

Use the ballooner halyard as if the sheave it rolls over breaks, you will only need to need to change your underwear, not your legs. With the external halyard, it’s a long scream down to the deck if something fails. Secure the bosun’s chair with a bolin/bowline to the ballooner halyard. You should have a mountaineering safety device sometimes called an ascender to use on the external spinnaker halyard that you should fix in position as a safety/reserve line. I don’t think you have an ascender so don’t do the rest until you get one.

Employing someone you trust completely who is familiar with lines and powered windlasses, take two turns with the ballooner halyard around the starboard side mainmast winch, the big one. Lead the tailing to the windlass drum after removing the chain from the other side. Depending on how old and slippery the ballooner halyard is, take two turns, three if it is slippery, around the drum. Have your trusted assistant hoist you just off the deck in the bosun’s chair employing the windlass. Now bounce and wiggle like a trapped bear and try to break any part of what you will be trusting your life to. Do it again. Once more…

Have your assistant hoist you using the windlass. It is best to employ a third set of hands to double tail the line as it comes off of the windlass. When you are ready to come down, it makes for a safer and much smoother ride if you only use the big winch on the mast to feed the halyard out backwards to ease you gently, key word is gently, to the deck. This means you will use your ascender, or a bear hug around the mast momentarily to take your weight off the ballooner halyard so it can be removed from the windlass as you will be employing only the big mast winch as you are coming down. Gently. You’ll understand what I mean if you try it without removing the line from the windlass drum. Told ya.

If I was there and you were me, you would urge me to use the ATN Topclimber. You control your destiny, no Pampers required. Use BOTH halyards to hoist it and an ascender if you have one. Belt and suspenders. Read the instructions in the bag. Be sure of your proper employment of all this blah blah I have sent you as well as all instructions with the Topclimber which I am sure Mr. Organization Mark left you when I sold you his boat.

Whiskey after. Not before. Liquid courage is not appropriate here.

Glad you are having fun with your Amel.



All The Best, Joel

Joel F. Potter/Cruising Yacht Specialist LLC

THE EXPERIENCED AMEL GUY

954 462 5869 office

954 812 2485 cell





From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Sunday, December 20, 2015 12:55 PM
To: amelyachtowners@...
Subject: [Amel Yacht Owners] Steaming light & mast climbing





Hello Amel Group,



Recently after a fairly rough crossing of the Gulf Stream to the Bahamas I lost my steaming light. I am now contemplating climbing the mast for my first time. I have a regular bosun chair as well as a ATN Topclimber on board. I am currently alone on board but in a marina and can get some help.



One of my questions is; Which of the halyards is best used for going up the mast? I have two that I know of available. If I have my halyards correct,,, one is the ballooner halyard I believe and the other is a spare halyard. Again, if I have my halyards correct,,, the ballooner halyard disappears into the top of the mast on a pulley. The spare halyard goes around a pulley that appears to be mounted & hanging on a stand off bracket. I just had that line replaced in June and it would be my first choice however I'm not convinced of the strength of the bracket/pulley at the top. The ballooner halyard seems a bet stretchy as well and is not new.



Any help on this would be greatly appreciated.



Now, in an effort to go up the mast as few times as possible I'd like to verify the bulb used for the steaming light on a 2001 Super Maramu. I see from an earlier post from Bill this information:



If you are asking about a Super Maramu...
Navigation and Anchor Bulbs:
Special vertical tungsten filament with BAY 15d bayonet socket:
Masthead (Steaming Light) - 25 watt
Port, Starboard - 25 watt
Stern 10 watt
Anchor - 10 watt



Which tells me that I should take a 25 watt bulb with me as well as various tools.



And now I'll go backwards to where I should start (in case it isn't the bulb),,, down on the deck and in the boat. Can someone help me with where to start the trouble shooting process before I go up the mast? I'm not going to say it doesn't scare me to go up the mast,, but on the other hand I would like to go ahead and do it now in the safe haven of a marina in case I ever have to do it away from shore.



Joel,, which halyard did Paul use for the survey?



Thanks so much,



Currently at Marsh Harbour Marina, Bahamas



Joe Nance

S/V CloudStreet

SM2000 hull #331

970-213-0331





[Non-text portions of this message have been removed]


Re: [Amel Yacht Owners] Re: Gas Struts for engine cover

karkauai
 

Message 18490, Eric.
Kent


On Dec 20, 2015, at 4:20 PM, sailormon kimberlite@... [amelyachtowners] <amelyachtowners@...> wrote:

 

Hi Alexandre,

I seem to have missed the post where you mentioned the source for the gas struts.

Would you mind posting it again.

Fair Winds

Eric

 

Kimberlite Amel Super Maramu #376

 

 

From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Sunday, December 20, 2015 11:37 AM
To: amelyachtowners@...
Subject: Re: [Amel Yacht Owners] Re: Gas Struts for engine cover

 

 

Thanks for this, Alexandre,
I just ordered them from Bansbach and they are now in stock and $74US each plus shipping.
Kent
SM 243
Kristy