Date   

Re: [Amel Yacht Owners] Assistance requested: ANNAPOLIS AREA (servicing prop shaft wear bearing & seals)

Bill & Judy Rouse <yahoogroups@...>
 

Vladimir,

I am so glad that you volunteered to help our new owner David Vogel. I think that you guys will get along great.

Bill Rouse
BeBe Amel 53 #387
Sent from my tablet
+1832-380-4970 USA Voice Mail


On Nov 28, 2016 11:35 PM, "Vladimir Sonsev sonsev52@... [amelyachtowners]" <amelyachtowners@...> wrote:
 

David,

I am a mechanical engineer. I perform all work on my boat. I definitely will be helpful.
We can do this job. My SM #345 is in Herrington Harbor North. She is in the hard.
Call me 202 258 1916.

Vladimir


On Nov 28, 2016 9:24 PM, "Vladimir Sonsev" <sonsev52@...> wrote:

I can help you, but I have never done it before. I know how it should be done.
I live in Edgewater. Call me.

Vladimir Sonsev
SM 345 "LIFE IS GOOD"
202 258 1916


On Nov 25, 2016 2:19 PM, "dbv_au@... [amelyachtowners]" <amelyachtowners@...om> wrote:
 

Hi all,

Is there anyone nearby to ANNAPOLIS willing and available to help me with refitting the lip-seals and wearing-out bearing for the prop shaft.

Things have gone far less smoothly than expected and, as the new lip-seals were inserted back-to-front, the job has to be started again from scratch.  Just having someone on-hand who has successfully done it before and is willing to impart a few tricks'n'tips, would be a great and welcome re-assurance.

Thanks if you can help.

David
  SV PERIGEE, SM#396, in the hard
    Jabin's Yacht Yard, Annapolis

 


Re: [Amel Yacht Owners] 220V Outlets

Alexandre Uster von Baar
 

Same here, mine is wired to the main supply.

Sincerely, Alexandre
SM2K #289 NIKIMAT
Harbor View Marina, Tortola, BVI



--------------------------------------------

On Mon, 11/28/16, Bill Kinney greatketch@... [amelyachtowners] <amelyachtowners@...> wrote:

Subject: Re: [Amel Yacht Owners] 220V Outlets
To: amelyachtowners@...
Date: Monday, November 28, 2016, 8:03 PM


 









John,
Our boat is not like that, all 220
outlets wired to the main supply. 
Sounds like someone really liked
their electric razor :)
Bill KinneySM#160
HarmonieOn the hard, Fort Lauderdale,
Florida


On Nov 28,
2016, at 19:58, jsrogers@...
[amelyachtowners] <amelyachtowners@...>
wrote:
















 






It may not be a surprise to some of you guys, but I
keep getting surprised by finding new things on my SM that I
did not know about.  Case in point is that I found that the
220 V outlet in the aft head is not fed from the generator
or shore power as the other outlets but has its own 24V to
220V inverter behind the wall.  Have any of you found this
on your boat?  I am considering running a new cable for
it.

John Rogers
SM #105
It's Good
Topping, VA
























#yiv0340863303 #yiv0340863303 --
#yiv0340863303ygrp-mkp {
border:1px solid #d8d8d8;font-family:Arial;margin:10px
0;padding:0 10px;}

#yiv0340863303 #yiv0340863303ygrp-mkp hr {
border:1px solid #d8d8d8;}

#yiv0340863303 #yiv0340863303ygrp-mkp #yiv0340863303hd {
color:#628c2a;font-size:85%;font-weight:700;line-height:122%;margin:10px
0;}

#yiv0340863303 #yiv0340863303ygrp-mkp #yiv0340863303ads {
margin-bottom:10px;}

#yiv0340863303 #yiv0340863303ygrp-mkp .yiv0340863303ad {
padding:0 0;}

#yiv0340863303 #yiv0340863303ygrp-mkp .yiv0340863303ad p {
margin:0;}

#yiv0340863303 #yiv0340863303ygrp-mkp .yiv0340863303ad a {
color:#0000ff;text-decoration:none;}
#yiv0340863303 #yiv0340863303ygrp-sponsor
#yiv0340863303ygrp-lc {
font-family:Arial;}

#yiv0340863303 #yiv0340863303ygrp-sponsor
#yiv0340863303ygrp-lc #yiv0340863303hd {
margin:10px
0px;font-weight:700;font-size:78%;line-height:122%;}

#yiv0340863303 #yiv0340863303ygrp-sponsor
#yiv0340863303ygrp-lc .yiv0340863303ad {
margin-bottom:10px;padding:0 0;}

#yiv0340863303 #yiv0340863303actions {
font-family:Verdana;font-size:11px;padding:10px 0;}

#yiv0340863303 #yiv0340863303activity {
background-color:#e0ecee;float:left;font-family:Verdana;font-size:10px;padding:10px;}

#yiv0340863303 #yiv0340863303activity span {
font-weight:700;}

#yiv0340863303 #yiv0340863303activity span:first-child {
text-transform:uppercase;}

#yiv0340863303 #yiv0340863303activity span a {
color:#5085b6;text-decoration:none;}

#yiv0340863303 #yiv0340863303activity span span {
color:#ff7900;}

#yiv0340863303 #yiv0340863303activity span
.yiv0340863303underline {
text-decoration:underline;}

#yiv0340863303 .yiv0340863303attach {
clear:both;display:table;font-family:Arial;font-size:12px;padding:10px
0;width:400px;}

#yiv0340863303 .yiv0340863303attach div a {
text-decoration:none;}

#yiv0340863303 .yiv0340863303attach img {
border:none;padding-right:5px;}

#yiv0340863303 .yiv0340863303attach label {
display:block;margin-bottom:5px;}

#yiv0340863303 .yiv0340863303attach label a {
text-decoration:none;}

#yiv0340863303 blockquote {
margin:0 0 0 4px;}

#yiv0340863303 .yiv0340863303bold {
font-family:Arial;font-size:13px;font-weight:700;}

#yiv0340863303 .yiv0340863303bold a {
text-decoration:none;}

#yiv0340863303 dd.yiv0340863303last p a {
font-family:Verdana;font-weight:700;}

#yiv0340863303 dd.yiv0340863303last p span {
margin-right:10px;font-family:Verdana;font-weight:700;}

#yiv0340863303 dd.yiv0340863303last p
span.yiv0340863303yshortcuts {
margin-right:0;}

#yiv0340863303 div.yiv0340863303attach-table div div a {
text-decoration:none;}

#yiv0340863303 div.yiv0340863303attach-table {
width:400px;}

#yiv0340863303 div.yiv0340863303file-title a, #yiv0340863303
div.yiv0340863303file-title a:active, #yiv0340863303
div.yiv0340863303file-title a:hover, #yiv0340863303
div.yiv0340863303file-title a:visited {
text-decoration:none;}

#yiv0340863303 div.yiv0340863303photo-title a,
#yiv0340863303 div.yiv0340863303photo-title a:active,
#yiv0340863303 div.yiv0340863303photo-title a:hover,
#yiv0340863303 div.yiv0340863303photo-title a:visited {
text-decoration:none;}

#yiv0340863303 div#yiv0340863303ygrp-mlmsg
#yiv0340863303ygrp-msg p a span.yiv0340863303yshortcuts {
font-family:Verdana;font-size:10px;font-weight:normal;}

#yiv0340863303 .yiv0340863303green {
color:#628c2a;}

#yiv0340863303 .yiv0340863303MsoNormal {
margin:0 0 0 0;}

#yiv0340863303 o {
font-size:0;}

#yiv0340863303 #yiv0340863303photos div {
float:left;width:72px;}

#yiv0340863303 #yiv0340863303photos div div {
border:1px solid
#666666;height:62px;overflow:hidden;width:62px;}

#yiv0340863303 #yiv0340863303photos div label {
color:#666666;font-size:10px;overflow:hidden;text-align:center;white-space:nowrap;width:64px;}

#yiv0340863303 #yiv0340863303reco-category {
font-size:77%;}

#yiv0340863303 #yiv0340863303reco-desc {
font-size:77%;}

#yiv0340863303 .yiv0340863303replbq {
margin:4px;}

#yiv0340863303 #yiv0340863303ygrp-actbar div a:first-child {
margin-right:2px;padding-right:5px;}

#yiv0340863303 #yiv0340863303ygrp-mlmsg {
font-size:13px;font-family:Arial, helvetica, clean,
sans-serif;}

#yiv0340863303 #yiv0340863303ygrp-mlmsg table {
font-size:inherit;font:100%;}

#yiv0340863303 #yiv0340863303ygrp-mlmsg select,
#yiv0340863303 input, #yiv0340863303 textarea {
font:99% Arial, Helvetica, clean, sans-serif;}

#yiv0340863303 #yiv0340863303ygrp-mlmsg pre, #yiv0340863303
code {
font:115% monospace;}

#yiv0340863303 #yiv0340863303ygrp-mlmsg * {
line-height:1.22em;}

#yiv0340863303 #yiv0340863303ygrp-mlmsg #yiv0340863303logo {
padding-bottom:10px;}


#yiv0340863303 #yiv0340863303ygrp-msg p a {
font-family:Verdana;}

#yiv0340863303 #yiv0340863303ygrp-msg
p#yiv0340863303attach-count span {
color:#1E66AE;font-weight:700;}

#yiv0340863303 #yiv0340863303ygrp-reco
#yiv0340863303reco-head {
color:#ff7900;font-weight:700;}

#yiv0340863303 #yiv0340863303ygrp-reco {
margin-bottom:20px;padding:0px;}

#yiv0340863303 #yiv0340863303ygrp-sponsor #yiv0340863303ov
li a {
font-size:130%;text-decoration:none;}

#yiv0340863303 #yiv0340863303ygrp-sponsor #yiv0340863303ov
li {
font-size:77%;list-style-type:square;padding:6px 0;}

#yiv0340863303 #yiv0340863303ygrp-sponsor #yiv0340863303ov
ul {
margin:0;padding:0 0 0 8px;}

#yiv0340863303 #yiv0340863303ygrp-text {
font-family:Georgia;}

#yiv0340863303 #yiv0340863303ygrp-text p {
margin:0 0 1em 0;}

#yiv0340863303 #yiv0340863303ygrp-text tt {
font-size:120%;}

#yiv0340863303 #yiv0340863303ygrp-vital ul li:last-child {
border-right:none !important;
}
#yiv0340863303


Re: [Amel Yacht Owners] Assistance requested: ANNAPOLIS AREA (servicing prop shaft wear bearing & seals)

VLADIMIR SONSEV
 

David,

I am a mechanical engineer. I perform all work on my boat. I definitely will be helpful.
We can do this job. My SM #345 is in Herrington Harbor North. She is in the hard.
Call me 202 258 1916.

Vladimir


On Nov 28, 2016 9:24 PM, "Vladimir Sonsev" <sonsev52@...> wrote:

I can help you, but I have never done it before. I know how it should be done.
I live in Edgewater. Call me.

Vladimir Sonsev
SM 345 "LIFE IS GOOD"
202 258 1916


On Nov 25, 2016 2:19 PM, "dbv_au@... [amelyachtowners]" <amelyachtowners@yahoogroups.com> wrote:
 

Hi all,

Is there anyone nearby to ANNAPOLIS willing and available to help me with refitting the lip-seals and wearing-out bearing for the prop shaft.

Things have gone far less smoothly than expected and, as the new lip-seals were inserted back-to-front, the job has to be started again from scratch.  Just having someone on-hand who has successfully done it before and is willing to impart a few tricks'n'tips, would be a great and welcome re-assurance.

Thanks if you can help.

David
  SV PERIGEE, SM#396, in the hard
    Jabin's Yacht Yard, Annapolis

 


Re: [Amel Yacht Owners] 220V Outlets

paul schofield <pwschofield@...>
 

I also have a 24v to 220v inverter under the chart table.  I haven’t been able to figure out what it is powering.  I guess I’ll check the aft head.

 

Paul Schofield

SM 215

Trillium

Brunswick, GA

 

Sent from Mail for Windows 10

 

From: jsrogers@... [amelyachtowners]
Sent: Monday, November 28, 2016 4:58 PM
To: amelyachtowners@...
Subject: [Amel Yacht Owners] 220V Outlets

 

 

It may not be a surprise to some of you guys, but I keep getting surprised by finding new things on my SM that I did not know about.  Case in point is that I found that the 220 V outlet in the aft head is not fed from the generator or shore power as the other outlets but has its own 24V to 220V inverter behind the wall.  Have any of you found this on your boat?  I am considering running a new cable for it.

John Rogers
SM #105
It's Good
Topping, VA



Re: [Amel Yacht Owners] Assistance requested: ANNAPOLIS AREA (servicing prop shaft wear bearing & seals)

VLADIMIR SONSEV
 

I can help you, but I have never done it before. I know how it should be done.
I live in Edgewater. Call me.

Vladimir Sonsev
SM 345 "LIFE IS GOOD"
202 258 1916


On Nov 25, 2016 2:19 PM, "dbv_au@... [amelyachtowners]" <amelyachtowners@...> wrote:
 

Hi all,

Is there anyone nearby to ANNAPOLIS willing and available to help me with refitting the lip-seals and wearing-out bearing for the prop shaft.

Things have gone far less smoothly than expected and, as the new lip-seals were inserted back-to-front, the job has to be started again from scratch.  Just having someone on-hand who has successfully done it before and is willing to impart a few tricks'n'tips, would be a great and welcome re-assurance.

Thanks if you can help.

David
  SV PERIGEE, SM#396, in the hard
    Jabin's Yacht Yard, Annapolis

 


Re: [Amel Yacht Owners] 220V Outlets

Bill Kinney <greatketch@...>
 

John,

Our boat is not like that, all 220 outlets wired to the main supply. 

Sounds like someone really liked their electric razor :)

Bill Kinney
SM#160 Harmonie
On the hard, Fort Lauderdale, Florida



On Nov 28, 2016, at 19:58, jsrogers@... [amelyachtowners] <amelyachtowners@...> wrote:

 

It may not be a surprise to some of you guys, but I keep getting surprised by finding new things on my SM that I did not know about.  Case in point is that I found that the 220 V outlet in the aft head is not fed from the generator or shore power as the other outlets but has its own 24V to 220V inverter behind the wall.  Have any of you found this on your boat?  I am considering running a new cable for it.

John Rogers
SM #105
It's Good
Topping, VA



Re: [Amel Yacht Owners] Re: Yanmar Engine issue

eric freedman
 

Is there a way to isolate the electronic ignition and add a ground to it?

I am rather familiar with the isolated ground on my older Yanmar engine as I completely rewired it myself this summer.

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Monday, November 28, 2016 8:40 PM
To: amelyachtowners@...
Subject: [Amel Yacht Owners] Re: Yanmar Engine issue

 

 

As an additional note to my March 8 post, I have installed the Yanmar 4JH80 with isolated grounds to all the sensors and alternators.   However, I have found that beginning with this year Yanmar is making their engines with an electronic ignition which requires constant power and a ground to the engine block which ob course violates Amel's isolated ground design.  The Boatyard mechanic is telling me that an isolating prop shaft coupling by Global Rubber will prevent any current from going into the water and will solve any corrosion problems.  Have anybody encountered this issue?


Re: Yanmar Engine issue

jsrogers@...
 

As an additional note to my March 8 post, I have installed the Yanmar 4JH80 with isolated grounds to all the sensors and alternators.   However, I have found that beginning with this year Yanmar is making their engines with an electronic ignition which requires constant power and a ground to the engine block which ob course violates Amel's isolated ground design.  The Boatyard mechanic is telling me that an isolating prop shaft coupling by Global Rubber will prevent any current from going into the water and will solve any corrosion problems.  Have anybody encountered this issue?


Re: [Amel Yacht Owners] 220V Outlets

Germain Jean-Pierre <jgermain@...>
 

Hello John,

We modified the electrics to include 450W of solar energy.  After 1 1/2 years, we found our mods very useful… we added a 3 KW inverter in the engine bay and wired most 220 V outlets to the inverter.  Great not to fire up the genset to get a cuppa  java.  We chose a Cotek product because they are made for the commercial fishing boats and bullet proof.

GL with your new wiring.


Jean-Pierre Germain
Eleuthera SM007
Lanzarote.. leaving for Guadeloupe on 3 Dec.


On 29 Nov 2016, at 00:58, jsrogers@... [amelyachtowners] <amelyachtowners@...> wrote:

 

It may not be a surprise to some of you guys, but I keep getting surprised by finding new things on my SM that I did not know about.  Case in point is that I found that the 220 V outlet in the aft head is not fed from the generator or shore power as the other outlets but has its own 24V to 220V inverter behind the wall.  Have any of you found this on your boat?  I am considering running a new cable for it.

John Rogers
SM #105
It's Good
Topping, VA




Jean-Pierre Germain,
+44 7551 211 511
jp.germain@...


220V Outlets

jsrogers@...
 

It may not be a surprise to some of you guys, but I keep getting surprised by finding new things on my SM that I did not know about.  Case in point is that I found that the 220 V outlet in the aft head is not fed from the generator or shore power as the other outlets but has its own 24V to 220V inverter behind the wall.  Have any of you found this on your boat?  I am considering running a new cable for it.

John Rogers
SM #105
It's Good
Topping, VA



Re: [Amel Yacht Owners] Two RCD devices triggered simultaneously

karkauai
 

The heating element on the Quick Nautical Boiler B3 40L has a 55mm hex nut.  You need a 55mm immersion box wrench to remove it.  It's an axle nut wrench that you should be able to purchase at a Napa or other auto parts store.
Kent
SM 243
Kristy


Maramu cockpit canopy

Graham Cresswell <grahamjcresswell@...>
 

We're fairly naive Amelers and we've just noticed for the first time the sound of water sloshing from side to side in the forward base of the canopy over the cockpit in our Maramu. I notice that there are six plastic plugs along the forward surface of the base of the canopy and I imagine they may be for access to bolts that attach the canopy to the main superstructure but I have no evidence for that idea. We've had torrential rain for the past couple of weeks here in Barbados and I notice that one of the six plastic plugs is loose and it's possible that the rain got through.

Does anyone have diagrams or knowledge of how the canopy structure mates with the main superstructure or any experience of water ingress to that part?

With kind regards

Graham Cresswell

S/Y Jamesby
Maramu #240


Re: [Amel Yacht Owners] Leaking Fuel Tank

Bill & Judy Rouse <yahoogroups@...>
 

Craig,

Isn't it possible that lightening caused this?

Bill Rouse
BeBe Amel 53 #387
Sent from my tablet
+1832-380-4970 USA Voice Mail


On Nov 28, 2016 4:22 PM, "sangaris@... [amelyachtowners]" <amelyachtowners@...> wrote:
 

When it rains it pours...

The tank on my SN#68 just sprung a leak.  I haven't taken it out yet, but It appears a straight-forward job to remove and carry out to the cockpit. (not being in the engine room as the 54 must be). 
I'm guessing it's the same 5086 H111 AL, Joel, that you noted for the Amel 54. Yes? 
Also, does anyone have a schematic of the tank?  
I'm up in Vero Beach, FL and had Tank-Nicians recommended for fabricating a replacement - anyone have any experience with them or can recommend others? 

Will appreciate any suggestions.
Cheers, Craig Briggs SN#68 Sangaris


---In amelyachtowners@yahoogroups.com, wrote :

Hi Bob. I t is considered bad form to kill the messenger bringing bad news. The tank in your boat cannot be removed without cutting it in pieces. It is made from 5086 H111 aluminum alloy. Two tanks will need to be fabricated to fit in the same space. I have confirmed this with Olivier. Sorry to have this news to give you. If you send me your email address, I can send you some free advice that will be worth much more than it costs.

 

Before  you Amel folks with an Amel 54 panic, there are extenuating circumstances which most probably led to the failure of the tank on this particular boat.

 

&nbs p;

Joel F. Potter/Cruising Yacht Specialist LLC

THE EXPERIENCED AMEL GUY

954 462 5869 office

954 812 2485 cell

 


Re: [Amel Yacht Owners] Leaking Fuel Tank

Craig Briggs
 

When it rains it pours...
The tank on my SN#68 just sprung a leak.  I haven't taken it out yet, but It appears a straight-forward job to remove and carry out to the cockpit. (not being in the engine room as the 54 must be). 
I'm guessing it's the same 5086 H111 AL, Joel, that you noted for the Amel 54. Yes? 
Also, does anyone have a schematic of the tank?  
I'm up in Vero Beach, FL and had Tank-Nicians recommended for fabricating a replacement - anyone have any experience with them or can recommend others? 

Will appreciate any suggestions.
Cheers, Craig Briggs SN#68 Sangaris


---In amelyachtowners@..., <jfpottercys@...> wrote :

Hi Bob. It is considered bad form to kill the messenger bringing bad news. The tank in your boat cannot be removed without cutting it in pieces. It is made from 5086 H111 aluminum alloy. Two tanks will need to be fabricated to fit in the same space. I have confirmed this with Olivier. Sorry to have this news to give you. If you send me your email address, I can send you some free advice that will be worth much more than it costs.

 

Before  you Amel folks with an Amel 54 panic, there are extenuating circumstances which most probably led to the failure of the tank on this particular boat.

 

 

Joel F. Potter/Cruising Yacht Specialist LLC

THE EXPERIENCED AMEL GUY

954 462 5869 office

954 812 2485 cell

 


Mizzen gear box

robin hutter
 

On my Super Maramu the mizzen could not benfurled propetly anymore - 3/4 turns worked ok, the about 1/4 turn I had to help turning the foil with my hand. When taking the gear box apart, I found that thete is one teflon/nylon gear wheel missing about one quarter of the teethes. I tried to source the par from Amel, but they say they are unable to provide it.

Does anyone know where it could be sourced or has another idea?

Robin

ASM GrosDoux #56, built in 1991

www.gros-doux.com

presently in Roccella Jonica, Italy


Re: [Amel Yacht Owners] Dessalator instructions - rinsing

Duane Siegfri
 

Thanks for the reply Bill.  The "idle" is not very clear.

It turns out I only moved the rinsing valve 90 degrees.  It doesn't open until about 135 degrees from the "seawater" position.

Oddly, I have a Duo 100 manual in the Amel binder, but a Duo 60 per the instrument panel.  Since there are only two membranes, it must be a 60.

Best regards,
Duane


Re: [Amel Yacht Owners] Dessalator instructions - rinsing

Bill & Judy Rouse <yahoogroups@...>
 

Do not turn ON the Dessalator for rinsing. Have the pressure valve all the way counterclockwise.

The reason the water pump was not running is:
You are using water pressure from the accumulator tanks and in about 30 seconds to a minute the pump will start

Or, you are turning the wrong valve, or the pre-filters are clogged and need changing.

Bill Rouse
BeBe Amel 53 #387
Sent from my tablet
+1832-380-4970 USA Voice Mail


On Nov 28, 2016 10:41 AM, "sailor63109@... [amelyachtowners]" <amelyachtowners@...> wrote:
 

To rinse the Duo 60 Dessalator, the instructions say "This should be carried out while the desalinator is idle and with the pressure regulator open (fully anti-clockwise)."


I assume "idle" means "not on".  So with the Dessalator turned off, I turned the valve on the pre-filter to select fresh pressurized water from the house water pump, and nothing happens.  The house water pump does not run.  So I turned the Dessalator on with no pressure and still the house water pump does not run.  


Can someone tell me the proper way to rinse the filter with fresh water?


The thought occurs to me that the pre-filter may be completely plugged.  The system has not been run since Feb 2015.


I'm working on replacing the pre-filter and the membranes.


Thanks,

Duane

Wanderer, SM#477



Re: [Amel Yacht Owners] Two RCD devices triggered simultaneously

Bill & Judy Rouse <yahoogroups@...>
 

Francisco,

Good, I am glad that it worked for you.

Tell us how much you paid for the part.

Bill Rouse
BeBe Amel 53 #387
Sent from my tablet
+1832-380-4970 USA Voice Mail


On Nov 28, 2016 10:42 AM, "svperegrinus@... [amelyachtowners]" <amelyachtowners@...> wrote:
 

Thank you Bill.  I just removed it.  Quick B3... unscrews through about 10 turns counterclockwise.  


It is Italian-made, so off to the hardware store I go.

Thanks again,



Re: [Amel Yacht Owners] Two RCD devices triggered simultaneously

svperegrinus@yahoo.com
 

Thank you Bill.  I just removed it.  Quick B3... unscrews through about 10 turns counterclockwise.  

It is Italian-made, so off to the hardware store I go.

Thanks again,


Dessalator instructions - rinsing

Duane Siegfri
 

To rinse the Duo 60 Dessalator, the instructions say "This should be carried out while the desalinator is idle and with the pressure regulator open (fully anti-clockwise)."


I assume "idle" means "not on".  So with the Dessalator turned off, I turned the valve on the pre-filter to select fresh pressurized water from the house water pump, and nothing happens.  The house water pump does not run.  So I turned the Dessalator on with no pressure and still the house water pump does not run.  


Can someone tell me the proper way to rinse the filter with fresh water?


The thought occurs to me that the pre-filter may be completely plugged.  The system has not been run since Feb 2015.


I'm working on replacing the pre-filter and the membranes.


Thanks,

Duane

Wanderer, SM#477