Ventilation vent cover on Amel 54
Sv Garulfo
Hi all, We lost the cover for the engine room ventilation output on the port passageway on our Amel 54. It's a simple vent cover but we haven't got any reference to replace it. Would it be possible for someone to post any information that may be useful to identify the part and replace it? A name/brand/picture would be great. Thanks in advance, Keep safe Thomas Garulfo Amel 54 #122 Cruising Minorca, Spain
|
|
Re: [Amel Yacht Owners] Re: Alex aboard Nikimat
Ken Powers <sailingaquarius@...>
To All, My thoughts and prayers go out to all the people that were in the path of Irma. Is there anyone close to Alex that could pick him up and take him somewhere safe.... maybe Martinique.... I hope things get better quickly, Ken Powers Aquarius SM2K sailingaquarius.com
On Tuesday, September 12, 2017 10:18 AM, "Ben Driver joedoakes66@... [amelyachtowners]" wrote:
We got a mail from our friends in France - Edouard And Marie-Helene Parent . They were able to hook Alex up with a Swiss national who will assist him - if possible "I received your file and send on the net a swiss friend is in contact with him for an help by Swiss consul" Marie-Helene Ben and Gayle La Bella Vita SM #347 Sent from Yahoo Mail for iPadOn Monday, September 11, 2017, 8:07 AM, Ben Driver/YAHOO joedoakes66@... [amelyachtowners] wrote:
|
|
genua traveller super maramu 1992
Peter
Hello,
One of the sheaves of my main sheet traveler car has broken. Does anyone know where I can get a replacement? Thank you very much, Peter
|
|
Re: [Amel Yacht Owners] Re: Alternative for not working Sonic Speed sensors
Bill
The B&G Hydra 2000 depth works at 170kHz Cheers Alan Elyse SM437
|
|
Re: [Amel Yacht Owners] Re: Alternative for not working Sonic Speed sensors
greatketch@...
Alan,
The P79 works at both 50 and 200 kHz, so I am guessing the Hydra runs at 83kHz? Or is it something unique and proprietary? Bill Kinney SM160, Harmonie Deltaville, Virginia
|
|
Re: [Amel Yacht Owners] Re: Alternative for not working Sonic Speed sensors
VLADIMIR SONSEV
Thanks for your comment. Vladimir Sonsev
On Sep 13, 2017 5:32 PM, "greatketch@... [amelyachtowners]" <amelyachtowners@...> wrote:
|
|
Re: [Amel Yacht Owners] Re: Alternative for not working Sonic Speed sensors
RE P79
Note that this sensor DOES NOT WORK WITH B&G HYDRA, it is the wrong frequency. Cheers Alan Elyse SM437
|
|
Re: [Amel Yacht Owners] Re: Alternative for not working Sonic Speed sensors
greatketch@...
Vladimir,
I have used that type of transducer and several other Amel owners have as well. They are made by Airmar, and are known in their catalog as a "P79". The only difference between the various brand labels for transducers like this is the connector on the end of the cable. They work very well on a solid fiberglass hull boat like an Amel. On a cored hull--not so much. Bill Kinney SM160, Harmonie Deltaville, Virginia ---In amelyachtowners@..., <sonsev52@...> wrote : Raymarine offers depth sounder that does not require a hole in the boat. It works through a fiberglass bottom.
|
|
Re: [Amel Yacht Owners] Re: Alternative for not working Sonic Speed sensors
VLADIMIR SONSEV
Raymarine offers depth sounder that does not require a hole in the boat. It works through a fiberglass bottom.
On Sep 13, 2017 11:25, "greatketch@... [amelyachtowners]" <amelyachtowners@yahoogroups.
|
|
Re: [Amel Yacht Owners] Re: Alternative for not working Sonic Speed sensors
greatketch@...
A year ago I replaced my Sonic Speed with a Airmar CS4500 ultrasonic speed sensor. It has been perfect. Reliable and accurate. Readings are stable and responsive. It does not have the electrical interference issues that plagued my Sonic Sensor, and not having to deal with fouled paddle wheels is great. For a while I ran the sonic sensor and the CS4500 side-by-side, and they always agreed perfectly--or at least they did when the sonic sensor chose to work.
toggle quoted messageShow quoted text
I enlarged the existing depth sensor hole to install the CS4500, and installed a P79 in-the-hull depth transducer, and all is happy. I have not decided yet if I will take out the sonic sensor at the next haul out. Bill Kinney SM160, Harmonie Deltaville, Virginia ---In amelyachtowners@..., <flyboyscd@...> wrote : Hi Kent, I installed a DST800 about 3 years ago on Aloha for my Ray Marine instruments. Had to remove the transducer from a dead forward looking sonar unit, enlarge the hole, and install the DST800. Only one persons experience, but it's still going strong 7000nm later. It seemed like a better option at the time than an extra hole for a paddle wheel. My very old B&G depth transducer recently failed, and I bought the only available replacement through Myles Electronics in FL for way too much money. Have not installed it yet, but hoping to get my 2nd depth source on line again. Regards, Steve Aloha SM72 Aruba for a few more days
On Sep 13, 2017, at 08:23, Kent Robertson karkauai@... [amelyachtowners] <amelyachtowners@...> wrote:
|
|
Re: [Amel Yacht Owners] Re: Alternative for not working Sonic Speed sensors
Stephen Davis
Hi Kent, I installed a DST800 about 3 years ago on Aloha for my Ray Marine instruments. Had to remove the transducer from a dead forward looking sonar unit, enlarge the hole, and install the DST800. Only one persons experience, but it's still going strong 7000nm later. It seemed like a better option at the time than an extra hole for a paddle wheel. My very old B&G depth transducer recently failed, and I bought the only available replacement through Myles Electronics in FL for way too much money. Have not installed it yet, but hoping to get my 2nd depth source on line again. Regards, Steve Aloha SM72 Aruba for a few more days
On Sep 13, 2017, at 08:23, Kent Robertson karkauai@... [amelyachtowners] <amelyachtowners@...> wrote:
|
|
Re: [Amel Yacht Owners] Re: Alternative for not working Sonic Speed sensors
I'm leery about the DST800. Marine Electric Services says they are prone to failure and don't recommend them any more. Kent Robertson
On Sep 8, 2017, at 2:06 PM, sangaris@... [amelyachtowners] <amelyachtowners@...> wrote:
Hi Kent
|
|
Re: [Amel Yacht Owners] Re: Main Mast Deck Light
Leopold Hauer
toggle quoted messageShow quoted text
|
|
Re: Main Mast Deck Light
Mark Pitt
Derick, Do you know the part number of the replacement ring? Do you have a source? I need to buy one. Thanks. Mark a Pitt, Sabbatical III, SM419, Mallorca
|
|
Re: [Amel Yacht Owners] Re: Companionway Wash Boards
VLADIMIR SONSEV
Mike, Thank you for your advise. It was very helpful. I removed old seal today as you recommend. Vladimir Sonsev
On Sep 12, 2017 7:19 AM, "'Mike Ondra' mdondra@... [amelyachtowners]" <amelyachtowners@...> wrote:
|
|
Re: Hurricane Prep
Duane Siegfri
For photos of the cover see the album "Cockpit Dodger Cover"
|
|
Re: Companionway Wash Boards
Duane Siegfri
Mike,
That was very clear and much appreciated. Best regards, Duane Wanderer, SM#477
|
|
Re: [Amel Yacht Owners] Sharki emergency tiller.
Hi Mark. We are in Langkawi, Malaysia.
From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Wednesday, 13 September 2017 2:15 AM To: amelyachtowners@... Subject: RE: [Amel Yacht Owners] Sharki emergency tiller.
Warren I will when I have found or made one. Where is your boat? I have been sailing Sea Hobo for about 9 months in the Solent and have not seen another Amel! I would like to see if I have put her together nicely. Mark
|
|
Re: [Amel Yacht Owners] Re: Sharki emergency tiller.
Thinking about it the tiller is curved but doesn’t come passed the mizzen mast
From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Wednesday, 13 September 2017 2:18 AM To: amelyachtowners@... Subject: [Amel Yacht Owners] Re: Sharki emergency tiller.
Thank you Warren, I will empty the cockpit lazarette this weekend. I find new things all the time. Is the tiller curved or just off centre? Mark
|
|
Re: Sharki emergency tiller.
7yqumejrzg65ljqdjmsancxievxsas2bedd3vnsh@...
Thank you Warren, I will empty the cockpit lazarette this weekend. I find new things all the time. Is the tiller curved or just off centre?
Mark
|
|