Date   

Re: [Amel Yacht Owners] Re: Finally a real forum member

karkauai
 

Congratulations and welcome to the group Arno.

I am using SeaHawk Island 44.  It is available in the US only for boats over 75 ft.  It is tin based and works great for 4-4.5 years.  All the big boats and ships use tin- based paints because they perform better.

I haven’t hauled the boat just to service the prop shaft.  My C-drive oil remains clear.  I drop the bow thruster after 2 years to check the oil in it and so far it has remained clear and no loss.  I rarely dock so the bow thruster gets very little use.  I put 4-500 hours a year on the engine.

A word of warning...nothing else sticks to tin-based paints.  To recoat with another product, the hull has to be completely stripped (in a closed environment in the US).

Kent Robertson
Kristy
SM 243

On Jun 27, 2018, at 7:32 AM, 'Luijten A.F.' arno.luijten@... [amelyachtowners] <amelyachtowners@...> wrote:

 

Thanks to all the people for the advice and congrats. It seems the Micron 77-stuff is the way forward.


Re: [Amel Yacht Owners] Re: Cam lock on main halyard?

karkauai
 

Hi Peter,
I have vertical battens in the main and mizzen. As long as the boom is at 90d, furling hasn’t been a problem.  Sail shape is significantly better than without them.  I don’t know how much that effects boat speed, but it probably helps some.

My battens are 20mm wide and 6-7 mm thick.  I can imagine that any thicker might be a problem going into the slot.

I am going to ask my sail loft about adding luff foam to improve sail shape when partially furled.  I don’t know if the battens will interfere with that.

Kent Robertson
S/V Kristy
SM 243


Re: Amel 54 bimini and weather protection

Dean Gillies
 

Porter, I have posted some pictures of the winter tent on the Facebook group. (I struggle with the logistics the posting attachments on this forum).
Cheers
Dean
SY Stella
Amel 54#154


Re: Finally a real forum member

Arno Luijten
 

Thanks to all the people for the advice and congrats. It seems the Micron 77-stuff is the way forward.


Re: [Amel Yacht Owners] Finally a real forum member

rossirossix4
 

Regarding Micron 77, in many (most?) parts of Europe it is no longer available having been replaced by Micron 350.  We had Micron 350 applied (Micron 77 no longer available) in April, 2018 at Manoel Island Yacht Yard, Malta. According to the experts at Manoel International Paint has assured them that performance will be as good or better.  When I compared content they looked similar.  Micron 350 is about 45% DiCopperOxide and 25% Zinc Oxide. We will let you know how it does.

Bob, KAIMI SM 429


Re: [Amel Yacht Owners] Finally a real forum member

Peter Forbes
 

I agree my 54 seems good with Micron 77. We just completed our circumnavigation.

Peter Forbes
0044 7836 209730
Carango  Sailing Ketch
Amel 54 #035
In La Rochelle

On 27 Jun 2018, at 05:25, 'Mohammad Shirloo' mshirloo@... [amelyachtowners] <amelyachtowners@...> wrote:


Arno;
 
Welcome to the group and the Amel family.
 
I second Ruedi's opinion. We have used Micron 77 and it has performed well in the Med. If anything does manage to attach itself to the hull after a long stay in a marina, a nice day sail cleans it all up.
 
Respectfully;
Mohammad and Aty
B&B Kokomo
Amel 54 #099
 


From: amelyachtowners@... [mailto:amelyachtowners@...] 
Sent: Tuesday, June 26, 2018 12:31 PM
To: amelyachtowners@...
Subject: Re: [Amel Yacht Owners] Finally a real forum member

 

Congratulation Arno

I had the same question few month a go. 
After a nice forum member mentioned that an Amel has to go out of water for the change of 'c-drive shaft bearing' every 2-3 year anyhow, I decided for traditional Micron-77 AF. Hope this works in MedSea ;-)

Ruedi
Wasabi A54#55
Sailing Cyclades


On 26 Jun 2018, at 22:06, Courtney Gorman Itsfun1@... [amelyachtowners] <amelyachtowners@...> wrote:

 

Arno congratulations!!  

Coppercoat designed to keep you boat in the water for longer without having to pull it to repaint yet you will have to service your Seadrive every 2 years which works nicely for new antifoul.  It is still a choice and matter of opinion but from my little bit of research sticking with traditional antifoul works best for us.
Cheers
Courtney
Trippin 54 #101
Grenada
-----Original Message-----
From: arno.luijten@... [amelyachtowners] <amelyachtowners@...>
To: amelyachtowners <amelyachtowners@...>
Sent: Tue, Jun 26, 2018 2:05 pm
Subject: [Amel Yacht Owners] Finally a real forum member

 
Dear Forum,

After quite some time lurking on this forum and provided unsollicited comments to Amel owners , we finally managed to get hold of one of our own. If all goes well we will gain the ownership by mid-July.
She is a 2009 Amel 54 in dire need of a lot of t.l.c.
We will bring her to Curacao in the next month and put her on the hard for the remainder of the hurricane season. There we will start with the extensive process to bring her back to her original “Grandeur”.

My first question is about Coppercoat. Is that possible/recommendable for an Amel?

I’m sure many other questions will pop up in the coming months...

Regards

Arno
A54 - Luna





Re: [Amel Yacht Owners] Isolated grounding question - solar installation

Alan Leslie
 

Hello Hanspeter
Agree absolutely..I don't see why one should connect the arch to the bonding system.
Cheers
Alan
Elyse SM437 


Re: [Amel Yacht Owners] Re: Cam lock on main halyard?

Alan Leslie
 

Hello Peter,

If you take the battens out of the sail you have and try to use it, it will be worse.
The standard main and mizzen sails on SMs have hollow leeches ie the line of the leech from the end of the boom to the mast is dipped towards the mast...that makes it furl easily into the mast and also makes the sail "fly"....without battens.
The idea of the battens is that you don't have the hollow leech, you have a sail which has either a straight line leech or even slightly "roached" ie the line of the leech is curved slightly away from the mast...that is probably what you have...as we have...and the sail area is slightly increased
If you take the battens out of that sail, and you sail with it, the leech will collapse and the airflow across the sail will be terrible. When you try to furl it in you will have real issues with the collapsed leech.....worse than if you left the battens in.
The trick with furling the battened sail is that the boom needs to be very near 90 degrees to the mast with not much tension on the main sheet, and when you start to furl, release the outhaul a little then run the mast motor and "chase' the sail into the mast with the boom motor, watching the leech as it goes in to make sure it goes in straight with the battens parallel to the mast. The topping lift bungee cord needs to be in good condition as well...that will help you keep the boom in the right place.
If you really want to get rid of the battens, then either you need to re-cut the sail with a hollow leech, or get a new mainsail.

Furling the main with battens takes practice...it took me a while to get it right...but it works and we have no problems with it at all....

good luck
Alan
SM437


Re: [Amel Yacht Owners] Re: Cam lock on main halyard?

Peter de Groot
 

Thanks Bill R.

I will be experimenting without battens before ordering the new main.  I like that idea, because furling and especially unfurling have been troublesome at times.

 

Best,

Peter de Groot
La Querida SM207


Re: [Amel Yacht Owners] Finally a real forum member

Mohammad Shirloo
 

Arno;
 
Welcome to the group and the Amel family.
 
I second Ruedi's opinion. We have used Micron 77 and it has performed well in the Med. If anything does manage to attach itself to the hull after a long stay in a marina, a nice day sail cleans it all up.
 
Respectfully;
Mohammad and Aty
B&B Kokomo
Amel 54 #099
 



From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Tuesday, June 26, 2018 12:31 PM
To: amelyachtowners@...
Subject: Re: [Amel Yacht Owners] Finally a real forum member

 

Congratulation Arno

I had the same question few month a go. 
After a nice forum member mentioned that an Amel has to go out of water for the change of 'c-drive shaft bearing' every 2-3 year anyhow, I decided for traditional Micron-77 AF. Hope this works in MedSea ;-)

Ruedi
Wasabi A54#55
Sailing Cyclades


On 26 Jun 2018, at 22:06, Courtney Gorman Itsfun1@... [amelyachtowners] <amelyachtowners@...> wrote:

 

Arno congratulations!! 

Coppercoat designed to keep you boat in the water for longer without having to pull it to repaint yet you will have to service your Seadrive every 2 years which works nicely for new antifoul.  It is still a choice and matter of opinion but from my little bit of research sticking with traditional antifoul works best for us.
Cheers
Courtney
Trippin 54 #101
Grenada
-----Original Message-----
From: arno.luijten@... [amelyachtowners] <amelyachtowners@...>
To: amelyachtowners <amelyachtowners@...>
Sent: Tue, Jun 26, 2018 2:05 pm
Subject: [Amel Yacht Owners] Finally a real forum member

 
Dear Forum,

After quite some time lurking on this forum and provided unsollicited comments to Amel owners , we finally managed to get hold of one of our own. If all goes well we will gain the ownership by mid-July.
She is a 2009 Amel 54 in dire need of a lot of t.l.c.
We will bring her to Curacao in the next month and put her on the hard for the remainder of the hurricane season. There we will start with the extensive process to bring her back to her original “Grandeur”.

My first question is about Coppercoat. Is that possible/recommendable for an Amel?

I’m sure many other questions will pop up in the coming months...

Regards

Arno
A54 - Luna


Top mast backstay attachment

svsunnyside
 

Good day Amelians
Has anybody run the adventure to take apart the 14x150 mm SS axel from the top of the main mast where the back stay fitting is attached ?  I foud it well "welded" to the aluminum support and after several days of corrosionX , plastic hammer and drill in Hammer mode , it does not moves at all. Back stay and Maroquin are taken apart and their fittings that stay on the mast mouves freely now .  Next step , heat and the previus steps.
Any tip could help and would be greatly apreciated. Thank you in advance.

Gabriele
S/V Sunny Side
Maramu #219
At Todomar Yard Cartagena


Re: [Amel Yacht Owners] Finally a real forum member

Alexandre Uster von Baar
 

Congratulations Arno!

See you soon!

Alexandre




--------------------------------------------

On Tue, 6/26/18, arno.luijten@gmail.com [amelyachtowners] <amelyachtowners@yahoogroups.com> wrote:

Subject: [Amel Yacht Owners] Finally a real forum member
To: amelyachtowners@yahoogroups.com
Date: Tuesday, June 26, 2018, 1:06 PM


 









Dear Forum,
After quite some time
lurking on this forum and provided unsollicited comments to
Amel owners , we finally managed to
get hold of one of our own. If all goes well we will gain
the ownership by mid-July.She is a 2009 Amel 54 in
dire need of a lot of t.l.c.We will bring her to
Curacao in the next month and put her on the hard for the
remainder of the hurricane season. There we will start with
the extensive process to bring her back to her original
“Grandeur”.
My first
question is about Coppercoat. Is that possible/recommendable
for an Amel?
I’m sure many
other questions will pop up in the coming months.
Regards
ArnoA54 - Luna


Re: [Amel Yacht Owners] Re: Travel on the US East Coast

Alex Ramseyer <alexramseyer@...>
 

Hi Brent,
I plan to do the U.S. east coast next year.
I was wondering if you could forward some of the information that you got?
Appreciate if that was possible,
Best regards,
Alex
SY NO STRESS
AMEL54 #15

On Thursday, May 31, 2018, 1:10:33 PM GMT-4, Brent Cameron brentcameron61@... [amelyachtowners] <amelyachtowners@...> wrote:


 

alt

Brent Cameron smiled at you


Re: [Amel Yacht Owners] Re: Volvo D3-110 won't start - instruments won't even light up?

Alex Ramseyer <alexramseyer@...>
 

Hi Scott,
I was wondering if you found out what the cause for your problems with the Volvo was and how you resolved it.
Thanks a lot,
Alex
SY NO STRESS
AMEL54 #15

On Saturday, June 2, 2018, 12:16:25 PM GMT-4, jose.esteller@... [amelyachtowners] wrote:


 

Hi Bill AND SCOTT. I do not know how to use the site amelyachtowners@...
that's why I'm sending you this message regarding SCOTT's problem
1- At CORFU GOUVIA there is an excellent VOLVO agent who is very competent and very reasonably priced. I make him do my big services on my D3 110 when I go to Gouvia
2-Two years ago my engine stopped in the open Ionian Sea, and he could not restart it. A few hours before I had a warning message: "fuel service needed" on the EVC, but I did not do anything.
I changed the fuel filter and the engine restarted, while like that of SCOTT he did not want to restart (the starter was not running either)
Maybe what I tell you might be useful to SCOTT
Regards José AMEL 54 ORION


Re: [Amel Yacht Owners] Finally a real forum member

Rudolf Waldispuehl
 

Congratulation Arno

I had the same question few month a go. 
After a nice forum member mentioned that an Amel has to go out of water for the change of 'c-drive shaft bearing' every 2-3 year anyhow, I decided for traditional Micron-77 AF. Hope this works in MedSea ;-)

Ruedi
Wasabi A54#55
Sailing Cyclades


On 26 Jun 2018, at 22:06, Courtney Gorman Itsfun1@... [amelyachtowners] <amelyachtowners@...> wrote:

 

Arno congratulations!! 

Coppercoat designed to keep you boat in the water for longer without having to pull it to repaint yet you will have to service your Seadrive every 2 years which works nicely for new antifoul.  It is still a choice and matter of opinion but from my little bit of research sticking with traditional antifoul works best for us.
Cheers
Courtney
Trippin 54 #101
Grenada
-----Original Message-----
From: arno.luijten@... [amelyachtowners] <amelyachtowners@...>
To: amelyachtowners <amelyachtowners@...>
Sent: Tue, Jun 26, 2018 2:05 pm
Subject: [Amel Yacht Owners] Finally a real forum member

 
Dear Forum,

After quite some time lurking on this forum and provided unsollicited comments to Amel owners , we finally managed to get hold of one of our own. If all goes well we will gain the ownership by mid-July.
She is a 2009 Amel 54 in dire need of a lot of t.l.c.
We will bring her to Curacao in the next month and put her on the hard for the remainder of the hurricane season. There we will start with the extensive process to bring her back to her original “Grandeur”.

My first question is about Coppercoat. Is that possible/recommendable for an Amel?

I’m sure many other questions will pop up in the coming months..

Regards

Arno
A54 - Luna


Re: [Amel Yacht Owners] Finally a real forum member

Courtney Gorman
 

Arno congratulations!! 
Coppercoat designed to keep you boat in the water for longer without having to pull it to repaint yet you will have to service your Seadrive every 2 years which works nicely for new antifoul.  It is still a choice and matter of opinion but from my little bit of research sticking with traditional antifoul works best for us.
Cheers
Courtney
Trippin 54 #101
Grenada

-----Original Message-----
From: arno.luijten@... [amelyachtowners]
To: amelyachtowners
Sent: Tue, Jun 26, 2018 2:05 pm
Subject: [Amel Yacht Owners] Finally a real forum member

 
Dear Forum,

After quite some time lurking on this forum and provided unsollicited comments to Amel owners , we finally managed to get hold of one of our own. If all goes well we will gain the ownership by mid-July.
She is a 2009 Amel 54 in dire need of a lot of t.l.c.
We will bring her to Curacao in the next month and put her on the hard for the remainder of the hurricane season. There we will start with the extensive process to bring her back to her original “Grandeur”.

My first question is about Coppercoat. Is that possible/recommendable for an Amel?

I’m sure many other questions will pop up in the coming months.

Regards

Arno
A54 - Luna


Re: [Amel Yacht Owners] Finally a real forum member

Jean-Pierre's MacBook Air <jgermain@...>
 

Hi Arno,

I have Coppercoat on my SM.  Some of Bill Rouse’s cautions apply.. such as the growth of algaeon the hull.  However, I have NO barnacles whatsoever after 3 years in the Med, Caribbean, Panama and Pacific.  

Yes, I do clean the hull every 2 months.

Regards,

Jean-Pierre Germain
SY Eleuthera, SM 007.

On 26 Jun 2018, at 08:30, Alex Ramseyer alexramseyer@... [amelyachtowners] <amelyachtowners@...> wrote:


Hi Arno,
I'll be in Caracao in the end of July/August timeframe with my boat. Would be nice to meet then. Do you have a local phone?
Best regards,
Alex
SY NO STRESS
AMEL54 #15


On Tuesday, June 26, 2018, 2:12:37 PM GMT-4, arno.luijten@... [amelyachtowners] <amelyachtowners@...> wrote:


 

Dear Forum,


After quite some time lurking on this forum and provided unsollicited comments to Amel owners , we finally managed to get hold of one of our own. If all goes well we will gain the ownership by mid-July.

She is a 2009 Amel 54 in dire need of a lot of t.l.c.

We will bring her to Curacao in the next month and put her on the hard for the remainder of the hurricane season. There we will start with the extensive process to bring her back to her original “Grandeur”.


My first question is about Coppercoat. Is that possible/recommendable for an Amel?


I’m sure many other questions will pop up in the coming months.


Regards


Arno

A54 - Luna




Re: [Amel Yacht Owners] Finally a real forum member

Alex Ramseyer <alexramseyer@...>
 

Hi Arno,
I'll be in Caracao in the end of July/August timeframe with my boat. Would be nice to meet then. Do you have a local phone?
Best regards,
Alex
SY NO STRESS
AMEL54 #15


On Tuesday, June 26, 2018, 2:12:37 PM GMT-4, arno.luijten@... [amelyachtowners] wrote:


 

Dear Forum,


After quite some time lurking on this forum and provided unsollicited comments to Amel owners , we finally managed to get hold of one of our own. If all goes well we will gain the ownership by mid-July.

She is a 2009 Amel 54 in dire need of a lot of t.l.c.

We will bring her to Curacao in the next month and put her on the hard for the remainder of the hurricane season. There we will start with the extensive process to bring her back to her original “Grandeur”.


My first question is about Coppercoat. Is that possible/recommendable for an Amel?


I’m sure many other questions will pop up in the coming months.


Regards


Arno

A54 - Luna


Re: [Amel Yacht Owners] Finally a real forum member

 

The answer is simple for tropical waters. If you enjoy diving and scraping your hull every 2-4 months, coppercoat is fine. However, if you do not and want something more actively involved in controlling barnacles and growth, look for an active inhibitor antifouling...there are lots of opinions on which to use.


Best,

CW Bill Rouse
Admiral, Texas Navy
Commander Emeritus

Amel School  http://www.amelschool.com
720 Winnie St
Galveston Island, TX 77550

+1(832) 380-4970






On Tue, Jun 26, 2018 at 1:05 PM arno.luijten@... [amelyachtowners] <amelyachtowners@...> wrote:
 

Dear Forum,


After quite some time lurking on this forum and provided unsollicited comments to Amel owners , we finally managed to get hold of one of our own. If all goes well we will gain the ownership by mid-July.

She is a 2009 Amel 54 in dire need of a lot of t.l.c.

We will bring her to Curacao in the next month and put her on the hard for the remainder of the hurricane season. There we will start with the extensive process to bring her back to her original “Grandeur”.


My first question is about Coppercoat. Is that possible/recommendable for an Amel?


I’m sure many other questions will pop up in the coming months.


Regards


Arno

A54 - Luna


Finally a real forum member

Arno Luijten
 

Dear Forum,


After quite some time lurking on this forum and provided unsollicited comments to Amel owners , we finally managed to get hold of one of our own. If all goes well we will gain the ownership by mid-July.

She is a 2009 Amel 54 in dire need of a lot of t.l.c.

We will bring her to Curacao in the next month and put her on the hard for the remainder of the hurricane season. There we will start with the extensive process to bring her back to her original “Grandeur”.


My first question is about Coppercoat. Is that possible/recommendable for an Amel?


I’m sure many other questions will pop up in the coming months.


Regards


Arno

A54 - Luna

18201 - 18220 of 58566