Date   

Re: [Amel Yacht Owners] mail and package forwarding while cruising

greatketch@...
 

Ryan,

SBI charges actual shipping costs, so no large premium above what the shipment costs. Their handling is included as part of your regular monthly fee.

The shipping methods vary depending on the destination country. For outbound USA domestic shipments, USPS and UPS are normally used. For international shipments, DHL and FedEx are available--among others.

They usually know based on past experience the best choice.  Although if you are "out island" it is always a good idea to check to see what the local businesses use. Sometimes the only good option is a local freight forwarder.

Bill Kinney
SM160, Harmonie
Annapolis, MD, USA



---In amelyachtowners@..., <ryan.d.meador@...> wrote :

So it sounds like SBI is the way to go.  Their website doesn't have much to say about how they handle packages.  Is it reasonably priced to have them ship larger things?  They say they always ship via USPS, so it that a reliable service in most places?  I've heard FedEx is the only way to get things in a timely manner on many smaller islands.

Thanks,

Ryan and Kelly
SM 233 Iteration
Boston, MA, USA


On Fri, Oct 5, 2018 at 10:04 AM rxc@... [amelyachtowners] <amelyachtowners@...> wrote:
 

I used SBI for 7 years, while we lived in France.  They give you a US address in Florida, and are very good at handling mail and even packages.  They sort out the junk, and make sure you get the stuff that you need.


Since they are in Florida, you can get a Florida drivers license and domicile, which can be important for tax and other financial purposes.  The local officials also seem to understand what is going on, and do not summon you to sit on juries when you are 4000 miles away...


Re: Emergency tiller cap O Ring

sbmesasailor
 

Hi Miles,

Your boat is newer than mine but our emergency tiller cap is the same way, just an eye bolt on top and not attached to anything.  The cap is very tight and does not remove easily, so I don't think there is much chance of losing it underway. We still have ours after a 40,000 mile circumnavigation.

Dennis
Libertad
Maramu #121


Re: [Amel Yacht Owners] Shock from windlass

 

Kent,

I am not medically trained but I believe that It requires between 200 and 1000s of DC voltage when you do that medical procedure...that's what is happening when "charging." There is a large capacitor charging so that the patient receives a momentary burst.

You need to look for a 110-220VAC source of current.

Best,

CW Bill Rouse
Admiral, Texas Navy
Commander Emeritus
Amel School www.amelschool.com
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970


On Sat, Oct 6, 2018, 15:59 greatketch@... [amelyachtowners] <amelyachtowners@...> wrote:
 

Kent,


If there was no AC shore power connected, then that makes things a lot simpler--and safer.

24 Volts DC will normally not give enough current flow through the human body to notice. With very sweat-wet skin I have felt feel what might best be called a "tingle," not anything I'd call a "jolt" although it can be surprising.  

You can certainly put one hand on each terminal of a 24 Volt battery and not feel a thing, because your body has a far higher resistance than that wrench shorted across those same terminals.

Anything less than 50 Volts is normally considered "safe" for people.

Bill Kinney
SM160, Harmonie



Re: [Amel Yacht Owners] mail and package forwarding while cruising

Ryan Meador
 

So it sounds like SBI is the way to go.  Their website doesn't have much to say about how they handle packages.  Is it reasonably priced to have them ship larger things?  They say they always ship via USPS, so it that a reliable service in most places?  I've heard FedEx is the only way to get things in a timely manner on many smaller islands.

Thanks,

Ryan and Kelly
SM 233 Iteration
Boston, MA, USA


On Fri, Oct 5, 2018 at 10:04 AM rxc@... [amelyachtowners] <amelyachtowners@...> wrote:
 

I used SBI for 7 years, while we lived in France.  They give you a US address in Florida, and are very good at handling mail and even packages.  They sort out the junk, and make sure you get the stuff that you need.


Since they are in Florida, you can get a Florida drivers license and domicile, which can be important for tax and other financial purposes.  The local officials also seem to understand what is going on, and do not summon you to sit on juries when you are 4000 miles away...


Re: [Amel Yacht Owners] Shock from windlass

greatketch@...
 

Kent,

If there was no AC shore power connected, then that makes things a lot simpler--and safer.

24 Volts DC will normally not give enough current flow through the human body to notice. With very sweat-wet skin I have felt feel what might best be called a "tingle," not anything I'd call a "jolt" although it can be surprising.  

You can certainly put one hand on each terminal of a 24 Volt battery and not feel a thing, because your body has a far higher resistance than that wrench shorted across those same terminals.

Anything less than 50 Volts is normally considered "safe" for people.

Bill Kinney
SM160, Harmonie


Re: Making O Rings

Alan Grayson
 

That's Great, thanks. I have ordered a kit .
Alan Grayson
SV Ora Pai SM 406
Ft Lauderdale


Replacing eng mounts

Alan Grayson
 

Hi All, I'm replacing the yanmar 4jh3-the eng mounts. It looks like I need to lift the eng frame 2 inches. There is a rubber boot that connects to the hull at the bottom of the C drive. If I disconnect the hose clamps at the top of that rubber boot will any oil spill out and will that allow me to lift the frame up.
Regards
Alan Grayson
SV Ora Pai SM 406
Ft Lauderdale


Re: [Amel Yacht Owners] Shock from windlass

karkauai
 

You’re talking about the center pole on AC plugs, right?  Nothing AC alive on Kristy when shock occurred.  No shore power connected, although worker might have dragged a 110AC extension aboard.

When you short a 12v battery between pos and neg, you get a huge arc.  Why wouldn’t that shock the crap out of you?  Direct current shock is what we use to shock the heart back into rhythm, gives the patient a big jolt.  

Kent Robertson
S/V Kristy
USA cell: 828-234-6819

On Oct 5, 2018, at 8:13 PM, greatketch@... [amelyachtowners] <amelyachtowners@...> wrote:

 

Kent,


When you measure that potential Bill R suggests, be sure you measure it both as AC and DC voltages.  If you find a significant AC voltage between the windlass and earth, I would unplug from shore power right away, confirm that the voltage has gone away, and stay unplugged until the problem is diagnosed and fixed.

If there is any kind of cross connection between an AC "hot" wire and the DC system, or the bonding wires it has the potential to be quite dangerous.

Bill Kinney
SM160, Harmonie
Annapolis, MD, USA


Re: [Amel Yacht Owners] Suddenly screaming noise from the bowthruster and not moving the prop anymore

Willem Kroes
 

Hello Martin,

Thanks for your fast reaction. The SM does not have a clutch like the 54. It's either the top- gears or the gears on he foot that failed. I will see what's wrong after the haul out next week.

Best regards,

Willem

SM #351 KAVANGA


Op 5 okt. 2018 11:20 schreef "Martin K luvkante@... [amelyachtowners]" :
 

Your clutch is broken


Martin
AMEL54 #149 „CHIARA“ 

Von meinem iPad gesendet

Am 05.10.2018 um 11:03 schrieb kavanga@... [amelyachtowners] <amelyachtowners@...>:

 

Hello fellow Amel owners,


I just moored my boat in the El Portet Marina in DENIA, Spain and almost done, the bow thruster did not function anymore and made a screaming noise. The prop is still there but it can turn almost without any resistance.


Any idea what can be wrong and how to repair is very much welcome.


Best regards,


Willem Kroes


SM #351 KAVANGA

  


Re: [Amel Yacht Owners] Suddenly screaming noise from the bowthruster and not moving the prop anymore

Willem Kroes
 

Thanks Bill, I will go to the boatyard next Wednesday for a already planned haul out. The broblem must be on the foot or on the top gears.

Best regards,

Willem

SM # 351 KAVANGA

Op 5 okt. 2018 15:43 schreef "Bill Rouse brouse@... [amelyachtowners]" :
 

There can be several causes.

Nikimat gave you a very complete answer, but to find the exact cause, you will need to disassemble the bow thruster.

Best,

CW Bill Rouse
Admiral, Texas Navy
Commander Emeritus

Amel School  http://www.amelschool.com
720 Winnie St
Galveston Island, TX 77550

+1(832) 380-4970

Any opinions and conclusions expressed in this message are solely those of the author and should not be construed as representing the opinion of an expert. Manufacturers' and Expert's precautions must be considered when dealing with mechanical and/or electrical systems to ensure that you are NOT harmed, and/or the device and/or system is NOT ruined. If in doubt, do not touch any mechanical and/or electrical device or system referred to above.


On Fri, Oct 5, 2018 at 4:03 AM kavanga@... [amelyachtowners] <amelyachtowners@...> wrote:
 

Hello fellow Amel owners,


I just moored my boat in the El Portet Marina in DENIA, Spain and almost done, the bow thruster did not function anymore and made a screaming noise. The prop is still there but it can turn almost without any resistance.


Any idea what can be wrong and how to repair is very much welcome.


Best regards,


Willem Kroes


SM #351 KAVANGA

  


Re: [Amel Yacht Owners] Re: Anchor Roller Removal...

 

Bill,

I seem to remember that the axel was welded on 387. 


Best,

CW Bill Rouse
Admiral, Texas Navy
Commander Emeritus
Amel School www.amelschool.com
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970


On Sat, Oct 6, 2018, 09:07 greatketch@... [amelyachtowners] <amelyachtowners@...> wrote:
 

Mark,


Thanks, If only it was that simple... Our pulpit is a lot simpler in construction, and I have a good view of both sides of the axle, but both have flared heads.  There is obviously a magic trick I am missing!  

I would be fine changing it out for a bolt if that makes sense, but surely there has to be a better way to disassemble than cutting it apart...


Bill Kinney
SM160, Harmonie
Annapolis, MD, USA


Re: Anchor Roller Removal...

greatketch@...
 

Mark,

Thanks, If only it was that simple... Our pulpit is a lot simpler in construction, and I have a good view of both sides of the axle, but both have flared heads.  There is obviously a magic trick I am missing!  

I would be fine changing it out for a bolt if that makes sense, but surely there has to be a better way to disassemble than cutting it apart...


Bill Kinney
SM160, Harmonie
Annapolis, MD, USA


Re: Making O Rings

Paul Osterberg
 

Bob and Suzanne!
Thank you for the tip, I sometimes had problem finding o-rings, thrust it will be less of a problem in the future. Will definitely have a o ring splicing kit aboard
Paul on SY Kerpa SM 259


Making O Rings

rossirossix4
 

We have had really good luck with an O Ring Splicing kit.  You can buy these in metric or inch versions and they come with a tool that helps you size and cut it AND line it up when gluing. e.g.  https://www.theoringstore.com/index.php?main_page=product_info&cPath=607&products_id=18578&zenid=9ed43caca167650bcb1de3dbd43b3748 They come in a plastic box kit.  You can also find them on eBay and Amazon and I think Buna and Loctite are the best known. It is almost impossible to carry all the O ring sizes we have on our boats.  Sometimes, if an O ring is missing you have to buy several "guesses" to fit it and a kit eliminates that problem as you can size it by measuring diameter and length in place before you make it.  Looked around--this guy made a YouTube on it https://www.youtube.com/watch?v=MniGPMJb1H0  and this boater made one https://www.youtube.com/watch?v=pDb5CrayM-U&t=14s You would think that the glued splice would be a weak point but as a test have stretched these beyond recognition without having it separate at the splice.  

Bob and Suzanne
KAIMI SM 429
Barcelona


Re: [Amel Yacht Owners] Foghorn?

eric freedman
 

We have a Raymarine VHF with a fog horn. The horn speaker is mounted pointed down directly above the first Mizzen spreader. It has a number of options. It only broke once when we were hit by a breaking wave in a hurricane. It has work flawlessly. We have a handset at the helm and at the nav station.

Running a wire from the mizzen to the nav station is very easy. Not so easy from the main mast.

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Friday, October 05, 2018 6:22 PM
To: amelyachtowners@...
Subject: [Amel Yacht Owners] Foghorn?

 

 

Has anyone fitted a foghorn on the main mast?  I don't see too many boats with one, but we were in fog for 8 hours earlier this year, and an automatic horn driven by the vhf would have been great.

 

If you have one, would you recommend the brand?

 

Thanks,

Duane

Wanderer, SM#477


Re: [Amel Yacht Owners] Shock from windlass

greatketch@...
 

Kent,

When you measure that potential Bill R suggests, be sure you measure it both as AC and DC voltages.  If you find a significant AC voltage between the windlass and earth, I would unplug from shore power right away, confirm that the voltage has gone away, and stay unplugged until the problem is diagnosed and fixed.

If there is any kind of cross connection between an AC "hot" wire and the DC system, or the bonding wires it has the potential to be quite dangerous.

Bill Kinney
SM160, Harmonie
Annapolis, MD, USA


Re: [Amel Yacht Owners] Foghorn?

Mark Erdos
 

Duane,

 

If you purchase another VHF/Hailer/Horn, I would suggest mounting it at the helm.

 

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff - SM2K - #275

Currently cruising - Aruba

www.creampuff.us

 

From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Friday, October 5, 2018 6:22 PM
To: amelyachtowners@...
Subject: [Amel Yacht Owners] Foghorn?

 

 

Has anyone fitted a foghorn on the main mast?  I don't see too many boats with one, but we were in fog for 8 hours earlier this year, and an automatic horn driven by the vhf would have been great.

 

If you have one, would you recommend the brand?

 

Thanks,

Duane

Wanderer, SM#477


Re: [Amel Yacht Owners] Shock from windlass

 

Kent,

Earth is Earth and not bonding or Negative pole on a battery or battery bank.

In the US, Earth is the center pole, is the green wire, which terminates on a copper rod driven into the earth. On an untouched original SM, Earth is the center pole, green/yellow wire that is not the green/yellow bonding wire.


Best,

CW Bill Rouse
Admiral, Texas Navy
Commander Emeritus
Amel School www.amelschool.com
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970


On Fri, Oct 5, 2018, 18:28 Kent Robertson karkauai@... [amelyachtowners] <amelyachtowners@...> wrote:
 

Thanks Bill.  I’ll do that tomorrow and let you know what I find.  By “earth” do you mean battery negative or bonding?  Or both?Voltage or Resistance or both?


I assume he was touching the windlass case.  Seems like a stretch to be pushing the button and rail at the same time???

Kent Robertson
S/V Kristy
USA cell: 828-234-6819

On Oct 5, 2018, at 4:43 PM, Bill Rouse brouse@... [amelyachtowners] <amelyachtowners@...> wrote:

 

I assume KRISTY is still on the hard.  Maybe you should measure the voltage between the rail and earth, and the windlass case and earth. Let me know...I have several ideas. 

And, the guy must have been touching something other than the switch and the rail because the switch is rubber.


Best,

CW Bill Rouse
Admiral, Texas Navy
Commander Emeritus
Amel School www.amelschool.com
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970

On Fri, Oct 5, 2018, 16:26 Kent Robertson karkauai@... [amelyachtowners] <amelyachtowners@...> wrote:
 

Thanks Steve.  I just ran new wires to the port nav light last year. I’ll look there first.


Thinking out loud here:
So that means there was a fault in the windlass energizing the case (? Dust from the contacts?), and the circuit is completed by the negative wire from the nav light?  Light doesn’t have to be on because switch for the lights is on the (+) wire, (-) is always connected.  If it were the (+) wire from the light, it would only be hot when the switch for the light was on.  Uhhhh, right???

Kent Robertson
S/V Kristy
USA cell: 828-234-6819

On Oct 5, 2018, at 3:21 PM, Stephen Davis flyboyscd@... [amelyachtowners] <amelyachtowners@...> wrote:

 

Hey Kent,

Had a similar problem on Aloha a few years ago. It was a part of the nav light wire which had brittle insulation and exposed wire was making contact with inside of rail. It would give you a mild DC shock. 

Good luck sorting out the problem. 

Steve 
Aloha SM 72
Hawaii

On Oct 5, 2018, at 09:02, karkauai@... [amelyachtowners] <amelyachtowners@yahoogroups....com> wrote:

 

Hello Amelians,

I just heard from the yard where I am having work done on Kristy.
One of the guys in the yard guy a shock while operating the windlass by the switch on the windlass and at the same time touching the lifeline rail.

They don’t have any clue about the Amel “ floating ground” and want to blame the shock on the floating ground. I assured them that this was highly unlikely, but I am not sure what is going on here.

Both the windlass and lifeline rail are exposed to sea water.
Are the lifeline rails connected to the bonding system? If so, where is the connection?
Is the windlass connected to the bonding system? If so, where?

Does anyone have an idea of how I should go about trouble-shooting this “shocking” problem?

The yard worker was using the button switch that raises the anchor, which is working as it should. The button switch that lowers the chain works only intermittently, and the up and down toggle switch at the helm works correctly. There was no shock when touching the windlass and rail unless the up switch was activated. The windlass did bring the chain up.

This sounds like a potentially dangerous situation, so I am anxious to find the problem and get it repaired.

Thank you for any advice. I will report what I find.

Happy sailing, Fair Winds, and Respect de la Mer.
Kent
SM 243
Kristy


Re: [Amel Yacht Owners] Re: Shock from windlass

karkauai
 

Thanks Duane, I’ll do that and report what I find.

Kent
S/V Kristy
SM 243

On Oct 5, 2018, at 6:31 PM, sailor63109@... [amelyachtowners] <amelyachtowners@...> wrote:

 

Kent,


I've been working on my windlass recently.  The motor wires directly to the negative battery terminal.   The switching happens on the positive side.

If your guy was touching the lifeline and the windlass and got a shock, I'll bet the positive was from the lifeline, and the negative for a circuit was from the windlass. 

So the wires in the lifeline is the thing to check first.  Check the voltage from the lifeline to the motor casing (I'm assuming there is some connection from the motor negative to the casing, which may be inadvertent).

Also, if one button works and the other doesn't, it could be the button, or it could be the control box.  My control box welded the contacts on one side for a runaway condition.  After "repairing" the control box, the up button works but not the down button because some of the wires from the solenoids to the control button spade terminals inside the box came free and I had to resolder them.  Apparently I was successful on the up button but not the down. 

Duane


Re: [Amel Yacht Owners] Foghorn?

 

Duane,

Based on a recent conversation, I think that you are going to be buying a new VHF. Almost all new VHFs come with a foghorn option that sounds through an external speaker. The easiest place to mount that speaker below the radome on the Mizzen.

Best,

CW Bill Rouse
Admiral, Texas Navy
Commander Emeritus
Amel School www.amelschool.com
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970


On Fri, Oct 5, 2018, 18:25 sailor63109@... [amelyachtowners] <amelyachtowners@...> wrote:
 

Has anyone fitted a foghorn on the main mast?  I don't see too many boats with one, but we were in fog for 8 hours earlier this year, and an automatic horn driven by the vhf would have been great.


If you have one, would you recommend the brand?


Thanks,

Duane

Wanderer, SM#477

16721 - 16740 of 59188