Date   

Proper Pronunciation?

David Adams <Wildernesstech@...>
 

Just how do you properly pronounce "Amel"?

David


Fiberglass Composition?

David Adams <Wildernesstech@...>
 

I am trying to find out what type of resin Amel used in there early
1980's fiberglass (for repair purposes)?

David


Super Maramu sale and broker report

itacknjibe <itacknjibe@...>
 

It is with bittersweet feelings that we report the sale of our 2003
SM, Sogno di Mare in October. Our time aboard has been wonderful
beyond compare, but circumstances have forced us to make other plans.
We do, however, have the highest praise for our sales broker, Kim
Korman, at Florida Coast Marine, in Fort Pierce, FL. She is
knowledgeable and hard-working, and is a former live-aboard cruiser
herself. We recommend her wholeheartedly! Her website is
www.floridacoastmarine.com.
Thanks to the group for all of the good advice over the past years.
Bill and Cathy Nation
Sogno di Mare, SM2K #404


Re: [Amel Yacht Owners] Re: Antifouling and winter berthing in Spain

jean-luc MERTZ <jlmertz@...>
 

Be VERY CAREFUL CORSICA is VERY particular if you are not Corse !!!

jlm
France
------------------------------------------------------------------------

Richard Piller a écrit :

We are now in Porto Vecchio on Corsica for the winter. If you need a
place for the winter this is a good one. The rate with power and ele.
is 2600 Eu. for the seven months. They have space. There are 4 Amels
here for the winter.
From here we can walk to marine stores and three major markets for
food and such. The ferry goes to Marseille 3 times a week and the
airport with flights to Marseille, Paris ect is 20 Km away. We find
life here very comfortable is a harbor that never sees freezing temps.
And if you do wish to see and feel snow go to the north end and at
8000 feet you get lots of snow. Water is good and there are people
around here swimming all winter...
Good luck
Richard and Joan on Challenge SM 209

--- On Thu, 11/6/08, Jose_Luis Isasi <jose.luis.isasi@motorola.com
<mailto:jose.luis.isasi%40motorola.com>> wrote:

From: Jose_Luis Isasi <jose.luis.isasi@motorola.com
<mailto:jose.luis.isasi%40motorola.com>>
Subject: [Amel Yacht Owners] Re: Antifouling and winter berthing in
Spain
To: amelyachtowners@yahoogroups.com
<mailto:amelyachtowners%40yahoogroups.com>
Date: Thursday, November 6, 2008, 12:24 PM
Hi Anne and John,

I have my Amel Euros 60 miles to the south of San Carlos de
la Rapita
(Burriana port) near Castellon. I have never heard of
freezes in this
area.
With the World Climate Change, you never know though.. :-).

Best regards
Jose-Luis




--- In amelyachtowners@yahoogroups.com
<mailto:amelyachtowners%40yahoogroups.com>, "John and Anne
on Bali Hai"
<annejohn@...> wrote:

We have used Micron Extra for the past six years and
are very happy
with it.It lasts for over two years provided that if
the boat is
hauled out during that time we succeed in stopping the
yard from
blasting it with high pressure hoses. We just wipe it
down with a
soft cloth or sponge keeping it wet with a hose until
the slime has
all been wiped off. We do use a high pressure hose to
clean the
hull
when it is hauled out to be anti fouled again but we
are careful to
keep the end of the jet at least three feet or half a
metre away
from
the hull as Amel suspect that high pressure hoses are
a major cause
of osmosis. If any growth appears during the season I
wipe the hull
down with a soft sponge using SCUBA kit. I have a long
pessure hose
to link me with the air bottle which remains on deck
and find this
system good for cleaning the prop which is so
sensitive to any
growth.

There is a new marina being completed at Sant Carles
de la Rapita
on
the east coast of Spain about 90 miles north east of
Mallorca and
about half way between Barcelona and Valencia. The
developers are
MDL
Ltd, a big player in the marina markets on the south
coast of
England. All the pontoons are in place and the office
building is
also in use. The hard standing area is under
construction and a
travel hoist will be provided very soon. Berths are
for sale or
rent
and there is a special deal on offer as the marina is
not complete
yet.Bali Hai is there on a pontoon pending completion
of the hard
standing and the rate for winter storage for a 15
metre boat is
only
about 1800 euros for October to end May 2009 including
haul out and
launch. Power and water are not metered and will
remain so. We are
told that it does not get cold enough to freeze water
during the
winter. The location is very sheltered and I would not
expect to
see
a swell in the marina except perhaps in a strong south
easterly and
probablly not even then.
Contact is n.salter@...

Best wishes, Anne and John, SM319

[Non-text portions of this message have been removed]


Re: [Amel Yacht Owners] Re: Antifouling and winter berthing in Spain

Richard Piller <richard03801@...>
 

We are now in Porto Vecchio on Corsica for the winter. If you need a place for the winter this is a good one. The rate with power and ele. is 2600 Eu. for the seven months. They have space. There are 4 Amels here for the winter.
From here we can walk to marine stores and three major markets for food and such. The ferry goes to Marseille 3 times a week and the airport with flights to Marseille, Paris ect is 20 Km away. We find life here very comfortable is a harbor that never sees freezing temps. And if you do wish to see and feel snow go to the north end and at 8000 feet you get lots of snow. Water is good and there are people around here swimming all winter...
Good luck
Richard and Joan on Challenge SM 209

--- On Thu, 11/6/08, Jose_Luis Isasi <jose.luis.isasi@motorola.com> wrote:

From: Jose_Luis Isasi <jose.luis.isasi@motorola.com>
Subject: [Amel Yacht Owners] Re: Antifouling and winter berthing in Spain
To: amelyachtowners@yahoogroups.com
Date: Thursday, November 6, 2008, 12:24 PM
Hi Anne and John,

I have my Amel Euros 60 miles to the south of San Carlos de
la Rapita
(Burriana port) near Castellon. I have never heard of
freezes in this
area.
With the World Climate Change, you never know though.. :-).

Best regards
Jose-Luis




--- In amelyachtowners@yahoogroups.com, "John and Anne
on Bali Hai"
<annejohn@...> wrote:

We have used Micron Extra for the past six years and
are very happy
with it.It lasts for over two years provided that if
the boat is
hauled out during that time we succeed in stopping the
yard from
blasting it with high pressure hoses. We just wipe it
down with a
soft cloth or sponge keeping it wet with a hose until
the slime has
all been wiped off. We do use a high pressure hose to
clean the
hull
when it is hauled out to be anti fouled again but we
are careful to
keep the end of the jet at least three feet or half a
metre away
from
the hull as Amel suspect that high pressure hoses are
a major cause
of osmosis. If any growth appears during the season I
wipe the hull
down with a soft sponge using SCUBA kit. I have a long
pessure hose
to link me with the air bottle which remains on deck
and find this
system good for cleaning the prop which is so
sensitive to any
growth.

There is a new marina being completed at Sant Carles
de la Rapita
on
the east coast of Spain about 90 miles north east of
Mallorca and
about half way between Barcelona and Valencia. The
developers are
MDL
Ltd, a big player in the marina markets on the south
coast of
England. All the pontoons are in place and the office
building is
also in use. The hard standing area is under
construction and a
travel hoist will be provided very soon. Berths are
for sale or
rent
and there is a special deal on offer as the marina is
not complete
yet.Bali Hai is there on a pontoon pending completion
of the hard
standing and the rate for winter storage for a 15
metre boat is
only
about 1800 euros for October to end May 2009 including
haul out and
launch. Power and water are not metered and will
remain so. We are
told that it does not get cold enough to freeze water
during the
winter. The location is very sheltered and I would not
expect to
see
a swell in the marina except perhaps in a strong south
easterly and
probablly not even then.
Contact is n.salter@...

Best wishes, Anne and John, SM319


Dorades?

David Adams <Wildernesstech@...>
 

I do not see any dorades in the photosI have looked at. Does Amel use
another ventilation system, or am I missing something?

Closer to closing the deal,
David


Re: Antifouling and winter berthing in Spain

Jose_Luis Isasi <jose.luis.isasi@...>
 

Hi Anne and John,

I have my Amel Euros 60 miles to the south of San Carlos de la Rapita
(Burriana port) near Castellon. I have never heard of freezes in this
area.
With the World Climate Change, you never know though.. :-).

Best regards
Jose-Luis




--- In amelyachtowners@yahoogroups.com, "John and Anne on Bali Hai"
<annejohn@...> wrote:

We have used Micron Extra for the past six years and are very happy
with it.It lasts for over two years provided that if the boat is
hauled out during that time we succeed in stopping the yard from
blasting it with high pressure hoses. We just wipe it down with a
soft cloth or sponge keeping it wet with a hose until the slime has
all been wiped off. We do use a high pressure hose to clean the
hull
when it is hauled out to be anti fouled again but we are careful to
keep the end of the jet at least three feet or half a metre away
from
the hull as Amel suspect that high pressure hoses are a major cause
of osmosis. If any growth appears during the season I wipe the hull
down with a soft sponge using SCUBA kit. I have a long pessure hose
to link me with the air bottle which remains on deck and find this
system good for cleaning the prop which is so sensitive to any
growth.

There is a new marina being completed at Sant Carles de la Rapita
on
the east coast of Spain about 90 miles north east of Mallorca and
about half way between Barcelona and Valencia. The developers are
MDL
Ltd, a big player in the marina markets on the south coast of
England. All the pontoons are in place and the office building is
also in use. The hard standing area is under construction and a
travel hoist will be provided very soon. Berths are for sale or
rent
and there is a special deal on offer as the marina is not complete
yet.Bali Hai is there on a pontoon pending completion of the hard
standing and the rate for winter storage for a 15 metre boat is
only
about 1800 euros for October to end May 2009 including haul out and
launch. Power and water are not metered and will remain so. We are
told that it does not get cold enough to freeze water during the
winter. The location is very sheltered and I would not expect to
see
a swell in the marina except perhaps in a strong south easterly and
probablly not even then.
Contact is n.salter@...

Best wishes, Anne and John, SM319


Winterising diesel engines

John and Anne on Bali Hai <annejohn@...>
 

We have downloaded advice contained in the latest issue of the
R.Y.A.Newsletter. and it is in the files section.
We have never removed the impellors during winter storage but if you do
not we recommend filling the sea water cooling system with fresh water
for this period in order to prevent barnacle growth in the sea water
system and especially in the impellor pump body as we think that the
baby barnacles are what damages the impellor on start up next season.
It is easily done.
Turn off the sea water cock under the seawater filter. Take the top
off the filter and stand over it with a fresh water hose. Have someone
start the engine and keep the filter filled to the top whilst the
engine flushes itself. Have someone stop the engine and start the
generator to flush that out before stopping the generator and turning
off the freshwater. If you are still going to be using the aircon and
heads put the top back on the filter and open the sea cock.
Obviously if you are not going to use the aircon and heads flush those
out whilst the filter is open. If the boat is hauled out there is no
reason why this procedure should not be followed on the hard.

Best wishes, Anne and John, SM319


Antifouling and winter berthing in Spain

John and Anne on Bali Hai <annejohn@...>
 

We have used Micron Extra for the past six years and are very happy
with it.It lasts for over two years provided that if the boat is
hauled out during that time we succeed in stopping the yard from
blasting it with high pressure hoses. We just wipe it down with a
soft cloth or sponge keeping it wet with a hose until the slime has
all been wiped off. We do use a high pressure hose to clean the hull
when it is hauled out to be anti fouled again but we are careful to
keep the end of the jet at least three feet or half a metre away from
the hull as Amel suspect that high pressure hoses are a major cause
of osmosis. If any growth appears during the season I wipe the hull
down with a soft sponge using SCUBA kit. I have a long pessure hose
to link me with the air bottle which remains on deck and find this
system good for cleaning the prop which is so sensitive to any growth.

There is a new marina being completed at Sant Carles de la Rapita on
the east coast of Spain about 90 miles north east of Mallorca and
about half way between Barcelona and Valencia. The developers are MDL
Ltd, a big player in the marina markets on the south coast of
England. All the pontoons are in place and the office building is
also in use. The hard standing area is under construction and a
travel hoist will be provided very soon. Berths are for sale or rent
and there is a special deal on offer as the marina is not complete
yet.Bali Hai is there on a pontoon pending completion of the hard
standing and the rate for winter storage for a 15 metre boat is only
about 1800 euros for October to end May 2009 including haul out and
launch. Power and water are not metered and will remain so. We are
told that it does not get cold enough to freeze water during the
winter. The location is very sheltered and I would not expect to see
a swell in the marina except perhaps in a strong south easterly and
probablly not even then.
Contact is n.salter@mdlmarinas.co.uk

Best wishes, Anne and John, SM319


Re: [Amel Yacht Owners] Sharki Headroom?

Serge Tremblay <laetitiaii@...>
 

David,
 
If you go to the Amel web page you will find the Sharki plans and specs under the "previous units" tab.
 
The plans do not show specific measurements, but there is a proportion reference, in meters, under one of th plans. From this reference you can approximate most measurements. 
 
Serge Tremblay Mango #51

--- En date de : Jeu, 6.11.08, WILLIAM KLEIN <sidecar1@verizon.net> a écrit :

De: WILLIAM KLEIN <sidecar1@verizon.net>
Objet: Re: [Amel Yacht Owners] Sharki Headroom?
À: amelyachtowners@yahoogroups.com
Date: jeudi 6 Novembre 2008, 6 h 08






There is adequate hed room in the main salon forward but the master cabin at the stern has inadequate headroom for a 5'8" person. Probably has 5'5" or something in that vcinity if I recall from 10 years ago.

----- Original Message -----
From: David Adams
To: amelyachtowners@ yahoogroups. com
Sent: Wednesday, November 05, 2008 6:45 AM
Subject: [Amel Yacht Owners] Sharki Headroom?

Hello folks,
How much headroom does a Sharki have? Does it go stem
to stern?

Thanks,

David

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]
















__________________________________________________________________
Obtenez l'adresse qu'il vous faut : @ymail.com or @rocketmail.com. Obtenez votre nouvelle adresse maintenant à http://cf.new.mail.yahoo.com/addresses.

[Non-text portions of this message have been removed]


Re: [Amel Yacht Owners] Sharki Headroom?

WILLIAM KLEIN <sidecar1@...>
 

There is adequate hed room in the main salon forward but the master cabin at the stern has inadequate headroom for a 5'8" person. Probably has 5'5" or something in that vcinity if I recall from 10 years ago.

----- Original Message -----
From: David Adams
To: amelyachtowners@yahoogroups.com
Sent: Wednesday, November 05, 2008 6:45 AM
Subject: [Amel Yacht Owners] Sharki Headroom?


Hello folks,
How much headroom does a Sharki have? Does it go stem
to stern?

Thanks,

David


Re: [Amel Yacht Owners] Re: Hard or Soft Antifouling

ianjenkins1946 <ianjudyjenkins@hotmail.com>
 

Hi Richard, 5 years on one application is amazing. Can you tell us
1.Was Spice in the water all the time?
2.How many miles a year, roughly, did you sail and which seas/oceans?
Cheers, Ian and Judy, Pen Azen, SM 302, Trinidad

To: amelyachtowners@yahoogroups.com
From: closereach@yahoo.com
Date: Wed, 5 Nov 2008 15:55:27 +0000
Subject: [Amel Yacht Owners] Re: Hard or Soft Antifouling

Ok, one more opinion :-)
We had 5 years using one application of 2 coats of Interlux Micron 33
with excellent results; maybe it's available outside the USA as tin is
the 'active' ingredient and isn't allowed anymore on recreational
marine vessels. We applied Micron 66 ten months ago with great results
so far. Both are soft, or ablative, anti-fouling bottom paints.
Richard
SM #5 "Spice"

--- In amelyachtowners@yahoogroups.com, "Armin" <n4796p@...> wrote:

Dear Richard and Joan,
thanks for your answer, it seams that there is no other opinion in the
whole forum. Therefore we will stay on the hard antifouling for the
next seasons.

Best regards
Armin
S/Y ASHIA
SM2k, #357

--- In amelyachtowners@yahoogroups.com, Richard Piller
<richard03801@> wrote:

We like Pettit Trinadad SR for an all around hard paint. It has
worked by far better then any of the "soft" stuff we have tried...
Richard and Joan on Challenge in Corse for the winter


--- On Wed, 10/29/08, Armin <n4796p@> wrote:

From: Armin <n4796p@>
Subject: [Amel Yacht Owners] Hard or Soft Antifouling
To: amelyachtowners@yahoogroups.com
Date: Wednesday, October 29, 2008, 3:47 PM
Hi all,
what are the suggestions of the group about using hard or
soft
antifouling. We are planning to do some longer sailing
trips
(Turkey-Gibraltar-Canaries-Caribic-....) next time. Which
kind of
antifouling will be the best to use? We where told to take
soft
antifouling, but I doubt.
Best regards
Armin
S/Y ASHIA
SM2k, #357


------------------------------------

Yahoo! Groups Links


_________________________________________________________________
BigSnapSearch.com - 24 prizes a day, every day - Search Now!
http://clk.atdmt.com/UKM/go/117442309/direct/01/


Re: Hard or Soft Antifouling

Zanareva
 

Ok, one more opinion :-)
We had 5 years using one application of 2 coats of Interlux Micron 33
with excellent results; maybe it's available outside the USA as tin is
the 'active' ingredient and isn't allowed anymore on recreational
marine vessels. We applied Micron 66 ten months ago with great results
so far. Both are soft, or ablative, anti-fouling bottom paints.
Richard
SM #5 "Spice"

--- In amelyachtowners@yahoogroups.com, "Armin" <n4796p@...> wrote:

Dear Richard and Joan,
thanks for your answer, it seams that there is no other opinion in the
whole forum. Therefore we will stay on the hard antifouling for the
next seasons.

Best regards
Armin
S/Y ASHIA
SM2k, #357

--- In amelyachtowners@yahoogroups.com, Richard Piller
<richard03801@> wrote:

We like Pettit Trinadad SR for an all around hard paint. It has
worked by far better then any of the "soft" stuff we have tried...
Richard and Joan on Challenge in Corse for the winter


--- On Wed, 10/29/08, Armin <n4796p@> wrote:

From: Armin <n4796p@>
Subject: [Amel Yacht Owners] Hard or Soft Antifouling
To: amelyachtowners@yahoogroups.com
Date: Wednesday, October 29, 2008, 3:47 PM
Hi all,
what are the suggestions of the group about using hard or
soft
antifouling. We are planning to do some longer sailing
trips
(Turkey-Gibraltar-Canaries-Caribic-....) next time. Which
kind of
antifouling will be the best to use? We where told to take
soft
antifouling, but I doubt.
Best regards
Armin
S/Y ASHIA
SM2k, #357


Re: Hard or Soft Antifouling

Armin <n4796p@...>
 

Dear Richard and Joan,
thanks for your answer, it seams that there is no other opinion in the
whole forum. Therefore we will stay on the hard antifouling for the
next seasons.

Best regards
Armin
S/Y ASHIA
SM2k, #357

--- In amelyachtowners@yahoogroups.com, Richard Piller
<richard03801@...> wrote:

We like Pettit Trinadad SR for an all around hard paint. It has
worked by far better then any of the "soft" stuff we have tried...
Richard and Joan on Challenge in Corse for the winter


--- On Wed, 10/29/08, Armin <n4796p@...> wrote:

From: Armin <n4796p@...>
Subject: [Amel Yacht Owners] Hard or Soft Antifouling
To: amelyachtowners@yahoogroups.com
Date: Wednesday, October 29, 2008, 3:47 PM
Hi all,
what are the suggestions of the group about using hard or
soft
antifouling. We are planning to do some longer sailing
trips
(Turkey-Gibraltar-Canaries-Caribic-....) next time. Which
kind of
antifouling will be the best to use? We where told to take
soft
antifouling, but I doubt.
Best regards
Armin
S/Y ASHIA
SM2k, #357


Sharki Headroom?

David Adams <Wildernesstech@...>
 

Hello folks,
How much headroom does a Sharki have? Does it go stem
to stern?

Thanks,

David


Re: [Amel Yacht Owners] Re: main sail furl

Battaglini Ornella Barbara <ornella.battaglini@...>
 

Thanks Gary,
last week end we had bad wheather so we hope to make the job on saturday sure that your description will be very helpfull.
Bye
Ornella Barbara
Santorin 122 Earendil

----- Original Message -----
From: amelliahona
To: amelyachtowners@yahoogroups.com
Sent: Tuesday, October 28, 2008 11:39 PM
Subject: [Amel Yacht Owners] Re: main sail furl


Barbara:

For photos and parts descriptions for the outhaul motor and gearbox see the photo's
section, page 4, SM Outhaul Service.
For a description of removing the outhaul and servicing the unit see message # 4019
where I describe that procedure.

Good Luck

Gary

--- In amelyachtowners@yahoogroups.com, "Battaglini Ornella Barbara"
<ornella.battaglini@...> wrote:
>
> Can amel people help me?
> this is the problem: when the electric engine on the boom is out of order, how can I
control by hand the main sail clew (foot)? and how is possible to disassemble the reducer
Bonfiglioli from the winch Andersen.
> Thanks for helps and good wind.
> Ornella, Santorin N° 122
>
> [Non-text portions of this message have been removed]
>






------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.175 / Virus Database: 270.8.4/1752 - Release Date: 28/10/2008 10.04


[Non-text portions of this message have been removed]


Re: [Amel Yacht Owners] Amel Ownership

Serge Tremblay <laetitiaii@...>
 

Mr Olivier Beauté of the After Sale Service of Amel ( in french Service Après Vente or SAV) has replaced  Mr Sello who held this job for more than 3 decades.
 
I am not certain Mr Beauté has maintained the procedure followed by Mr Sello pursuant to which a written record was maintained for each and every boat produced by the yard. Any repair by the Amel yard or parts ordered from Amel for a specific boat was, at the time, added to the file.
 
When, I investigated 3 or 4 Amel boats listed for purchase in 2003, I was supprised to discover how much the SAV knew about the various units... However, obviously, the SAV does not know of work carried on by owners or other yards...so buyers beware 
 
A serious french surveyor  retained to advise on the purchase of a Amel, will routinely check with SAV for such record... It was the case with a surveyor of Guadeloupe, Mr Christian Mir.
 
Serge Tremblay, Mango #51

--- En date de : Mar, 4.11.08, William Klein <sidecar1@verizon.net> a écrit :

De: William Klein <sidecar1@verizon.net>
Objet: Re: [Amel Yacht Owners] Amel Ownership
À: amelyachtowners@yahoogroups.com
Date: mardi 4 Novembre 2008, 14 h 52






They speak english at Amel. In the past they have been very helpful and it seemed like they knew my individual boat.

----- Original Message -----
From: passagemakersv_ friendship
To: amelyachtowners@ yahoogroups. com
Sent: Tuesday, November 04, 2008 2:15 PM
Subject: [Amel Yacht Owners] Amel Ownership

We may be nearing the purchase of an Amel and would like to know what
type of support you have found from the factory, and any other good
parts source where Amels are concerned?

The one we are looking at needs work (Why I can afford it) and
unfortunately I do not speak French so talking to the factory seems
out.

What have you folks found?

David

[Non-text portions of this message have been removed]
















Offrez un compte Flickr Pro à vos amis et à votre famille.
http://www.flickr.com/gift/


Re: bow thruster electrical failure

drdavegoodman
 

Hi Criag and all
The problem was in the on-off switch! thanks so much for the assistance.
Dave


--- In amelyachtowners@yahoogroups.com, "Craig & Katherine"
<sangaris@...> wrote:

Hi Dave,
Had same sounding problem - was just the on-off switch in the control
panel. Try putting a wire jumper across the switch terminals and see
if the red light goes on.
On mine, the rubber boot had cracked with time and allowed water into
the switch. Actually, just wiggling it a lot got it working, but I'll
now replace it (and the rubber boot).
Regards,
Craig Briggs, Santorin #68


Re: [Amel Yacht Owners] Amel Ownership

David Adams <Wildernesstech@...>
 

Thanks Bill.

David

-----Original Message-----
From: amelyachtowners@yahoogroups.com
[mailto:amelyachtowners@yahoogroups.com] On Behalf Of William Klein
Sent: Tuesday, November 04, 2008 1:52 PM
To: amelyachtowners@yahoogroups.com
Subject: Re: [Amel Yacht Owners] Amel Ownership

They speak english at Amel. In the past they have been very helpful and
it seemed like they knew my individual boat.
----- Original Message -----
From: passagemakersv_friendship
To: amelyachtowners@ <mailto:amelyachtowners%40yahoogroups.com>
yahoogroups.com
Sent: Tuesday, November 04, 2008 2:15 PM
Subject: [Amel Yacht Owners] Amel Ownership

We may be nearing the purchase of an Amel and would like to know what
type of support you have found from the factory, and any other good
parts source where Amels are concerned?

The one we are looking at needs work (Why I can afford it) and
unfortunately I do not speak French so talking to the factory seems
out.

What have you folks found?

David


Re: [Amel Yacht Owners] Amel Ownership

William Klein <sidecar1@...>
 

They speak english at Amel. In the past they have been very helpful and it seemed like they knew my individual boat.

----- Original Message -----
From: passagemakersv_friendship
To: amelyachtowners@yahoogroups.com
Sent: Tuesday, November 04, 2008 2:15 PM
Subject: [Amel Yacht Owners] Amel Ownership


We may be nearing the purchase of an Amel and would like to know what
type of support you have found from the factory, and any other good
parts source where Amels are concerned?

The one we are looking at needs work (Why I can afford it) and
unfortunately I do not speak French so talking to the factory seems
out.

What have you folks found?

David