Date   

Re: Battery temp monitor and alarm

 

I think I bought that one on Amazon for about $20. I is designed for a home. The probe has a wire about 1 meter long. It has an alarm. Shop Amazon and I  sure you'll have several choices. 

Best,

CW Bill Rouse
Yacht School - Supporting Amel Owners
www.YachtSchool.us
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970

On Tue, Jun 11, 2019, 6:16 PM karkauai via Groups.Io <karkauai=yahoo.com@groups.io> wrote:
Thanks Bill...guess I should have looked in “the Book” first.
That looks like what I want.  Who makes it?  

Kent Robertson
S/V Kristy
USA cell: 828-234-6819

On Jun 11, 2019, at 6:19 PM, CW Bill Rouse <brouse@...> wrote:

I like simple. Here is something that has all the things you want and is simple:
<image.png>

Best,

CW Bill Rouse
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970



On Tue, Jun 11, 2019 at 5:14 PM karkauai via Groups.Io <karkauai=yahoo.com@groups.io> wrote:
Hi All,
I want to add a temp sensor with monitor and alarm to my battery compartment.  My primary charger has a temp sensor, but that doesn’t give a readout or even work at all unless I am using the charger. With charging by a backup charger, Yanmar, and now Solar, none of which have a temp sensor, I want to be able to monitor temp in the battery compartment.  I’ve been searching the net and so far only find monitors that will notify me by cell phone and other heigh-tech solutions.  I just want a simple sensor with a remote monitor that I can set to give an audible alarm if temp exceeds a set value.  Does anyone have something like this?  Can you share what model and where you found it?
thanks in advance
Kent & Iris
Kristy SM243


Re: Battery temp monitor and alarm

karkauai
 

Thanks Bill...guess I should have looked in “the Book” first.
That looks like what I want.  Who makes it?  

Kent Robertson
S/V Kristy
USA cell: 828-234-6819

On Jun 11, 2019, at 6:19 PM, CW Bill Rouse <brouse@...> wrote:

I like simple. Here is something that has all the things you want and is simple:
<image.png>

Best,

CW Bill Rouse
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970



On Tue, Jun 11, 2019 at 5:14 PM karkauai via Groups.Io <karkauai=yahoo.com@groups.io> wrote:
Hi All,
I want to add a temp sensor with monitor and alarm to my battery compartment.  My primary charger has a temp sensor, but that doesn’t give a readout or even work at all unless I am using the charger. With charging by a backup charger, Yanmar, and now Solar, none of which have a temp sensor, I want to be able to monitor temp in the battery compartment.  I’ve been searching the net and so far only find monitors that will notify me by cell phone and other heigh-tech solutions.  I just want a simple sensor with a remote monitor that I can set to give an audible alarm if temp exceeds a set value.  Does anyone have something like this?  Can you share what model and where you found it?
thanks in advance
Kent & Iris
Kristy SM243


Re: Reya fresh water pump won’t start

karkauai
 

Sorry, Eric, they’re already spoken for.

Kent Robertson
S/V Kristy
USA cell: 828-234-6819

On Jun 11, 2019, at 4:15 PM, eric freedman <kimberlite@...> wrote:

Hi Kent,
I would appreciate receiving them.
Where are you located?
Fair Winds,
Eric
SM 376 Kimberlite

On June 11, 2019 at 10:38 AM "karkauai via Groups.Io" <karkauai@...> wrote:

I have two of the original fresh water pumps that I am not using. We have gone to an on-demand pump.  They both functioned last time I tested them, but I don’t know what shape they are in now..  I believe both could be resurrected, or at least be a good source of parts.
if anyone wants them, I’m happy to give them to you for the cost of shipping.

Please contact me privately if you are interested.
Kent & Iris
Kristy SM243
karkauai@...
828-234-6819

 


Re: Battery temp monitor and alarm

 

I like simple. Here is something that has all the things you want and is simple:
image.png

Best,

CW Bill Rouse
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970



On Tue, Jun 11, 2019 at 5:14 PM karkauai via Groups.Io <karkauai=yahoo.com@groups.io> wrote:
Hi All,
I want to add a temp sensor with monitor and alarm to my battery compartment.  My primary charger has a temp sensor, but that doesn’t give a readout or even work at all unless I am using the charger. With charging by a backup charger, Yanmar, and now Solar, none of which have a temp sensor, I want to be able to monitor temp in the battery compartment.  I’ve been searching the net and so far only find monitors that will notify me by cell phone and other heigh-tech solutions.  I just want a simple sensor with a remote monitor that I can set to give an audible alarm if temp exceeds a set value.  Does anyone have something like this?  Can you share what model and where you found it?
thanks in advance
Kent & Iris
Kristy SM243


Battery temp monitor and alarm

karkauai
 

Hi All,
I want to add a temp sensor with monitor and alarm to my battery compartment.  My primary charger has a temp sensor, but that doesn’t give a readout or even work at all unless I am using the charger. With charging by a backup charger, Yanmar, and now Solar, none of which have a temp sensor, I want to be able to monitor temp in the battery compartment.  I’ve been searching the net and so far only find monitors that will notify me by cell phone and other heigh-tech solutions.  I just want a simple sensor with a remote monitor that I can set to give an audible alarm if temp exceeds a set value.  Does anyone have something like this?  Can you share what model and where you found it?
thanks in advance
Kent & Iris
Kristy SM243


Re: Standing rigging on 54

 

Mohammad,

Tony Wells said he is interested. I believe he will contact you or Nicky.

Best,

CW Bill Rouse
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970



On Tue, Jun 11, 2019 at 3:27 PM Mohammad Shirloo <mshirloo@...> wrote:
Hi Bill; i don’t know if I mistyped or if it was Iphone. Nicky.

Nicky is trying to setup to be in Corfu June 24-26 to work on our rig, if any one is in need of any work.

Respectfully;


Mohammad & Aty
B&B Kokomo
Amel 54 #099

On Jun 11, 2019, at 4:08 PM, CW Bill Rouse via Groups.Io <brouse@...> wrote:


"Nicky" from Malta is what you meant to say. I always recommend Nicky Samut in Malta for any Med rigging issues. I suspect that Nicky has a lot of air miles. During the winter season he will be in Sicily at least 2 weeks working on rigging. He has also upgraded Bamar furlers. And, Nicky is a Yacht School Preferred Vendor, the only rigger in Europe selected as a rigging Preferred Vendor.


Contact: nickysail"at"hotmail.com. BTW, Nicky has sailed/crewed on most all Amel models, including a 64.

Best,

CW Bill Rouse
Yacht School - Supporting Amel Owners
www.YachtSchool.us
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970

On Tue, Jun 11, 2019, 7:44 AM Roque <ediroque@...> wrote:
Mohammad & Aty

I had a few cracked wires at the main too (#117). I reported this fact to ACMO in november 2018. 
  Would you care to tell when you informed ACMO about this failure? Was it last year? 

Thank you for you input. 

Roque
Attika A54 - 117
Santos - Brazil  


Em ter, 11 de jun de 2019 às 07:32, Mohammad Shirloo <mshirloo@...> escreveu:
Hello Porter;

I hope you guys are doing well and the engine issues are now behind you.

We are replacing all 6 shrouds at the main because ACMO had a crack in one of the original long shrouds that we found in our rig inspection last year.

They did extend a 10% discount because of this so the total shipped to Corfu was 5000 euros.

Off course you only need to upgrade the mid and lower shrouds so your pricing will be less. I did receive a complete quote for all rigging that I will forward to you shortly.

I, like you, try to do everything I can myself, which is about 90%. It’s better to make a mistake and learn while help is available. However, the cruising season in the Med is short so I do elect to use known outside people if necessary so we get to enjoy the season.

The rigging is definitely one of them, at this point, for us. So I’m flying Ricky from Malta to Corfu for 2 days to take care of the shrouds and some lighting and wind cane issues.

Enjoy Tahiti. We chartered there in 2008 and had a great time.


Mohammad & Aty
B&B Kokomo
Amel 54 #099

> On Jun 10, 2019, at 10:08 PM, Porter McRoberts via Groups.Io <portermcroberts=yahoo.com@groups.io> wrote:
>
> Dear Mohammad and Aty
>
> Would you be willing to let me or us know the cost from ACMO?
> This seems very tempting to do myself?  Then have a rigger double check.  A lot of work, yes but interesting and tempting!
>
> Many thanks.
>
> Porter
>
> S/V IBIS 54-152
> Tahiti.
>
> Excuse the errors.
> Sent from my IPhone
> Www.fouribis.com
>
>> On Jun 6, 2019, at 11:19 PM, ngtnewington Newington via Groups.Io <ngtnewington=aol.com@groups.io> wrote:
>>
>> Thanks guys, it looks like if I order from ACMO then it is a straight swap. So that is what I will do.
>> I have thought hard about all this and at the end of the day I do not want to have that niggling feeling that my rigging is not up to it on a dark stormy night!
>> Nick
>>> On 7 Jun 2019, at 11:42, Mohammad Shirloo <mshirloo@...> wrote:
>>>
>>> Hello Nick;
>>>
>>> We are currently going though the same process and we have just released the order to ACMO.
>>>
>>> If ordered from ACMO, you will receive the entire parts required for the upgrade. This includes a “stronger” pin, as ACMO puts it, the turn buckles and threaded eye. I just again reconfirmed this with ACMO. If you look at your connections at the chain plates, the parts have an ACMO stamp on them.
>>>
>>> Therefore according to ACMO, no other parts will be necessary, it is just a matter of removing the existing shrouds and installing new.
>>>
>>> I will provide an update if we find anything that contradicts this during the install.
>>>
>>> Respectfully;
>>>
>>>
>>> Mohammad & Aty
>>> B&B Kokomo
>>> Amel 54 #099
>>>
>>>> On Jun 7, 2019, at 7:27 AM, ngtnewington Newington via Groups.Io <ngtnewington=aol.com@groups.io> wrote:
>>>>
>>>>
>>>> Further to the news that the Amel 54 should have 12mm aft lowers not 10mm and that the intermediates should be beefed up from 8mm to 10mm. I am now seriously working this out.
>>>> On the face of it I can order the replacement wire and fittings from ACMO in France and have it a week later. What worries me is that the pin sizes will increase (I guess)
>>>> This should be no problem at the bottom where there is a massive chainplate that I could drill out to accept the bigger pins but at the top at the spreader bases it will be tricky.
>>>> Has anyone been there and done this project?
>>>> What about sticking to 8mm and 10 mm but upgrading the wire quality to say Dyform? Dyform offers about 30% more strength than standard 1x19?
>>>> Any experts out there?
>>>> Nick
>>>> S/Y Amelia AML54-019
>>>> Anchored in Kefalonia enjoying easy living after 2000 mile voyage from Canary Islands.
>
>
>
>




Re: Standing rigging on 54

Mohammad Shirloo
 

Hi Bill; i don’t know if I mistyped or if it was Iphone. Nicky.

Nicky is trying to setup to be in Corfu June 24-26 to work on our rig, if any one is in need of any work.

Respectfully;


Mohammad & Aty
B&B Kokomo
Amel 54 #099

On Jun 11, 2019, at 4:08 PM, CW Bill Rouse via Groups.Io <brouse@...> wrote:


"Nicky" from Malta is what you meant to say. I always recommend Nicky Samut in Malta for any Med rigging issues. I suspect that Nicky has a lot of air miles. During the winter season he will be in Sicily at least 2 weeks working on rigging. He has also upgraded Bamar furlers. And, Nicky is a Yacht School Preferred Vendor, the only rigger in Europe selected as a rigging Preferred Vendor.


Contact: nickysail"at"hotmail.com. BTW, Nicky has sailed/crewed on most all Amel models, including a 64.

Best,

CW Bill Rouse
Yacht School - Supporting Amel Owners
www.YachtSchool.us
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970

On Tue, Jun 11, 2019, 7:44 AM Roque <ediroque@...> wrote:
Mohammad & Aty

I had a few cracked wires at the main too (#117). I reported this fact to ACMO in november 2018. 
  Would you care to tell when you informed ACMO about this failure? Was it last year? 

Thank you for you input. 

Roque
Attika A54 - 117
Santos - Brazil  


Em ter, 11 de jun de 2019 às 07:32, Mohammad Shirloo <mshirloo@...> escreveu:
Hello Porter;

I hope you guys are doing well and the engine issues are now behind you.

We are replacing all 6 shrouds at the main because ACMO had a crack in one of the original long shrouds that we found in our rig inspection last year.

They did extend a 10% discount because of this so the total shipped to Corfu was 5000 euros.

Off course you only need to upgrade the mid and lower shrouds so your pricing will be less. I did receive a complete quote for all rigging that I will forward to you shortly.

I, like you, try to do everything I can myself, which is about 90%. It’s better to make a mistake and learn while help is available. However, the cruising season in the Med is short so I do elect to use known outside people if necessary so we get to enjoy the season.

The rigging is definitely one of them, at this point, for us. So I’m flying Ricky from Malta to Corfu for 2 days to take care of the shrouds and some lighting and wind cane issues.

Enjoy Tahiti. We chartered there in 2008 and had a great time.


Mohammad & Aty
B&B Kokomo
Amel 54 #099

> On Jun 10, 2019, at 10:08 PM, Porter McRoberts via Groups.Io <portermcroberts=yahoo.com@groups.io> wrote:
>
> Dear Mohammad and Aty
>
> Would you be willing to let me or us know the cost from ACMO?
> This seems very tempting to do myself?  Then have a rigger double check.  A lot of work, yes but interesting and tempting!
>
> Many thanks.
>
> Porter
>
> S/V IBIS 54-152
> Tahiti.
>
> Excuse the errors.
> Sent from my IPhone
> Www.fouribis.com
>
>> On Jun 6, 2019, at 11:19 PM, ngtnewington Newington via Groups.Io <ngtnewington=aol.com@groups.io> wrote:
>>
>> Thanks guys, it looks like if I order from ACMO then it is a straight swap. So that is what I will do.
>> I have thought hard about all this and at the end of the day I do not want to have that niggling feeling that my rigging is not up to it on a dark stormy night!
>> Nick
>>> On 7 Jun 2019, at 11:42, Mohammad Shirloo <mshirloo@...> wrote:
>>>
>>> Hello Nick;
>>>
>>> We are currently going though the same process and we have just released the order to ACMO.
>>>
>>> If ordered from ACMO, you will receive the entire parts required for the upgrade. This includes a “stronger” pin, as ACMO puts it, the turn buckles and threaded eye. I just again reconfirmed this with ACMO. If you look at your connections at the chain plates, the parts have an ACMO stamp on them.
>>>
>>> Therefore according to ACMO, no other parts will be necessary, it is just a matter of removing the existing shrouds and installing new.
>>>
>>> I will provide an update if we find anything that contradicts this during the install.
>>>
>>> Respectfully;
>>>
>>>
>>> Mohammad & Aty
>>> B&B Kokomo
>>> Amel 54 #099
>>>
>>>> On Jun 7, 2019, at 7:27 AM, ngtnewington Newington via Groups.Io <ngtnewington=aol.com@groups.io> wrote:
>>>>
>>>>
>>>> Further to the news that the Amel 54 should have 12mm aft lowers not 10mm and that the intermediates should be beefed up from 8mm to 10mm. I am now seriously working this out.
>>>> On the face of it I can order the replacement wire and fittings from ACMO in France and have it a week later. What worries me is that the pin sizes will increase (I guess)
>>>> This should be no problem at the bottom where there is a massive chainplate that I could drill out to accept the bigger pins but at the top at the spreader bases it will be tricky.
>>>> Has anyone been there and done this project?
>>>> What about sticking to 8mm and 10 mm but upgrading the wire quality to say Dyform? Dyform offers about 30% more strength than standard 1x19?
>>>> Any experts out there?
>>>> Nick
>>>> S/Y Amelia AML54-019
>>>> Anchored in Kefalonia enjoying easy living after 2000 mile voyage from Canary Islands.
>
>
>
>




Re: Reya fresh water pump won’t start

eric freedman
 

Hi Kent,
I would appreciate receiving them.
Where are you located?
Fair Winds,
Eric
SM 376 Kimberlite

On June 11, 2019 at 10:38 AM "karkauai via Groups.Io" <karkauai@...> wrote:

I have two of the original fresh water pumps that I am not using. We have gone to an on-demand pump.  They both functioned last time I tested them, but I don’t know what shape they are in now..  I believe both could be resurrected, or at least be a good source of parts.
if anyone wants them, I’m happy to give them to you for the cost of shipping.

Please contact me privately if you are interested.
Kent & Iris
Kristy SM243
karkauai@...
828-234-6819

 


Re: Important - Amel 54 and any Electrical Emergency #IMPORTANT

Oliver Henrichsen, SV Vela Nautica
 

If I am not mistaken, some solar and windregulators need to be permanent connected to the batterie BEFORE any power is applied from pannel or windgen.
If batterie is disconnected it will destroy the regulators. 
So read manuals on which side of the switch the regulator has to be connected. 

Oliver from Vela Nautica 54#39
Faro Portugal 

On Sun, May 26, 2019, 21:23 SY STELLA <stella@...> wrote:
Another important point to note is that Solar regulators should preferably be connected to the ‘panel side’ of the battery isolator switches.  (For the same reasons).  However, this means that battery isolator switches must be left on when solar charging is wanted, eg during wintering. For this reason, I suspect many folks will connect the solar regulator to the battery side. Noting of course that the solar system should always incorporate breakers on the panel and battery side of the regulator.
All interesting issues to consider when briefing crew etc.
Dean


Re: Am I the only one so stupid?

Oliver Henrichsen, SV Vela Nautica
 

Hi,

After getting bored to set alarms for refill we placed a magnet into the rod and two reed switches in the scale, connected to our board controller.
By that we get an alarm at refill close to overflow and an alarm when closing low level. 

Oliver from Vela Nautica Amel54 #39
Position Faro Portugal

On Tue, May 28, 2019, 13:48 ngtnewington Newington via Groups.Io <ngtnewington=aol.com@groups.io> wrote:
Been there done that.
Nick
Amelia approaching south tip of  Sardinia. 
AML55-019


On 27 May 2019, at 00:16, Mark Erdos <mcerdos@...> wrote:

We are also members of this club. We now set a timer when filling the water tank to remind us to check the progress. It is amazing how many times the timer goes off and we both suddenly sit up because we forgot the water is running.

 

 

With best regards,

 

Mark

 

Skipper

Sailing Vessel - Cream Puff - SM2K - #275

Currently cruising - Panama

www.creampuff.us

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of Arno Luijten
Sent: Sunday, May 26, 2019 5:34 PM
To: main@AmelYachtOwners.groups.io
Subject: [AmelYachtOwners] Am I the only one so stupid?

 

All,

Our 54 has a major design flaw. Or it’s not protected against stupidity, take your pick.
Anyway I managed for the third time now to overflow the fresh water tank while refilling. The problem is that the water does not simply overflows through the filler cap. Instead it gushes out of the level meter pipe next to the companionway right into the main saloon bilge that has no drain. Oops.
Anyone else has the same problem?

Arno
SV Luna,
A54-121 


Re: Reya fresh water pump won’t start

karkauai
 

I have two of the original fresh water pumps that I am not using. We have gone to an on-demand pump.  They both functioned last time I tested them, but I don’t know what shape they are in now..  I believe both could be resurrected, or at least be a good source of parts.
if anyone wants them, I’m happy to give them to you for the cost of shipping.

Please contact me privately if you are interested.
Kent & Iris
Kristy SM243
karkauai@...
828-234-6819


Re: Standing rigging on 54

Roque
 

Mohammad and Aty.

Thank you . That was helpful.


Em ter, 11 de jun de 2019 às 10:04, Mohammad Shirloo <mshirloo@...> escreveu:

Hi Roque;

The crack that we found was in the swagging and not in the wires. It was not considered a failure by either ACMO or our rigger. ACMO did acknowledge that at the time our rigging was swagged, they had an older machine that led to the crack and we were advised to simply keep an eye on it to make sure it does not get any bigger. The assumption was that the crack was there from day one.

However since we were going to upgrade the rest of the shrouds at the main, we decided to take care of this also so we don it have any questionable or potentially weak areas at the main.

We informed ACMO of the crack last month.


Mohammad & Aty
B&B Kokomo
Amel 54 #099

On Jun 11, 2019, at 3:44 PM, Roque via Groups.Io <ediroque@...> wrote:

Mohammad & Aty

I had a few cracked wires at the main too (#117). I reported this fact to ACMO in november 2018. 
  Would you care to tell when you informed ACMO about this failure? Was it last year? 

Thank you for you input. 

Roque
Attika A54 - 117
Santos - Brazil  


Em ter, 11 de jun de 2019 às 07:32, Mohammad Shirloo <mshirloo@...> escreveu:
Hello Porter;

I hope you guys are doing well and the engine issues are now behind you.

We are replacing all 6 shrouds at the main because ACMO had a crack in one of the original long shrouds that we found in our rig inspection last year.

They did extend a 10% discount because of this so the total shipped to Corfu was 5000 euros.

Off course you only need to upgrade the mid and lower shrouds so your pricing will be less. I did receive a complete quote for all rigging that I will forward to you shortly.

I, like you, try to do everything I can myself, which is about 90%. It’s better to make a mistake and learn while help is available. However, the cruising season in the Med is short so I do elect to use known outside people if necessary so we get to enjoy the season.

The rigging is definitely one of them, at this point, for us. So I’m flying Ricky from Malta to Corfu for 2 days to take care of the shrouds and some lighting and wind cane issues.

Enjoy Tahiti. We chartered there in 2008 and had a great time.


Mohammad & Aty
B&B Kokomo
Amel 54 #099

> On Jun 10, 2019, at 10:08 PM, Porter McRoberts via Groups.Io <portermcroberts=yahoo.com@groups.io> wrote:
>
> Dear Mohammad and Aty
>
> Would you be willing to let me or us know the cost from ACMO?
> This seems very tempting to do myself?  Then have a rigger double check.  A lot of work, yes but interesting and tempting!
>
> Many thanks.
>
> Porter
>
> S/V IBIS 54-152
> Tahiti.
>
> Excuse the errors.
> Sent from my IPhone
> Www.fouribis.com
>
>> On Jun 6, 2019, at 11:19 PM, ngtnewington Newington via Groups.Io <ngtnewington=aol.com@groups.io> wrote:
>>
>> Thanks guys, it looks like if I order from ACMO then it is a straight swap. So that is what I will do.
>> I have thought hard about all this and at the end of the day I do not want to have that niggling feeling that my rigging is not up to it on a dark stormy night!
>> Nick
>>> On 7 Jun 2019, at 11:42, Mohammad Shirloo <mshirloo@...> wrote:
>>>
>>> Hello Nick;
>>>
>>> We are currently going though the same process and we have just released the order to ACMO.
>>>
>>> If ordered from ACMO, you will receive the entire parts required for the upgrade. This includes a “stronger” pin, as ACMO puts it, the turn buckles and threaded eye. I just again reconfirmed this with ACMO. If you look at your connections at the chain plates, the parts have an ACMO stamp on them.
>>>
>>> Therefore according to ACMO, no other parts will be necessary, it is just a matter of removing the existing shrouds and installing new.
>>>
>>> I will provide an update if we find anything that contradicts this during the install.
>>>
>>> Respectfully;
>>>
>>>
>>> Mohammad & Aty
>>> B&B Kokomo
>>> Amel 54 #099
>>>
>>>> On Jun 7, 2019, at 7:27 AM, ngtnewington Newington via Groups.Io <ngtnewington=aol.com@groups.io> wrote:
>>>>
>>>>
>>>> Further to the news that the Amel 54 should have 12mm aft lowers not 10mm and that the intermediates should be beefed up from 8mm to 10mm. I am now seriously working this out.
>>>> On the face of it I can order the replacement wire and fittings from ACMO in France and have it a week later. What worries me is that the pin sizes will increase (I guess)
>>>> This should be no problem at the bottom where there is a massive chainplate that I could drill out to accept the bigger pins but at the top at the spreader bases it will be tricky.
>>>> Has anyone been there and done this project?
>>>> What about sticking to 8mm and 10 mm but upgrading the wire quality to say Dyform? Dyform offers about 30% more strength than standard 1x19?
>>>> Any experts out there?
>>>> Nick
>>>> S/Y Amelia AML54-019
>>>> Anchored in Kefalonia enjoying easy living after 2000 mile voyage from Canary Islands.
>
>
>
>




Re: Standing rigging on 54

 


"Nicky" from Malta is what you meant to say. I always recommend Nicky Samut in Malta for any Med rigging issues. I suspect that Nicky has a lot of air miles. During the winter season he will be in Sicily at least 2 weeks working on rigging. He has also upgraded Bamar furlers. And, Nicky is a Yacht School Preferred Vendor, the only rigger in Europe selected as a rigging Preferred Vendor.


Contact: nickysail"at"hotmail.com. BTW, Nicky has sailed/crewed on most all Amel models, including a 64.

Best,

CW Bill Rouse
Yacht School - Supporting Amel Owners
www.YachtSchool.us
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970


On Tue, Jun 11, 2019, 7:44 AM Roque <ediroque@...> wrote:
Mohammad & Aty

I had a few cracked wires at the main too (#117). I reported this fact to ACMO in november 2018. 
  Would you care to tell when you informed ACMO about this failure? Was it last year? 

Thank you for you input. 

Roque
Attika A54 - 117
Santos - Brazil  


Em ter, 11 de jun de 2019 às 07:32, Mohammad Shirloo <mshirloo@...> escreveu:
Hello Porter;

I hope you guys are doing well and the engine issues are now behind you.

We are replacing all 6 shrouds at the main because ACMO had a crack in one of the original long shrouds that we found in our rig inspection last year.

They did extend a 10% discount because of this so the total shipped to Corfu was 5000 euros.

Off course you only need to upgrade the mid and lower shrouds so your pricing will be less. I did receive a complete quote for all rigging that I will forward to you shortly.

I, like you, try to do everything I can myself, which is about 90%. It’s better to make a mistake and learn while help is available. However, the cruising season in the Med is short so I do elect to use known outside people if necessary so we get to enjoy the season.

The rigging is definitely one of them, at this point, for us. So I’m flying Ricky from Malta to Corfu for 2 days to take care of the shrouds and some lighting and wind cane issues.

Enjoy Tahiti. We chartered there in 2008 and had a great time.


Mohammad & Aty
B&B Kokomo
Amel 54 #099

> On Jun 10, 2019, at 10:08 PM, Porter McRoberts via Groups.Io <portermcroberts=yahoo.com@groups.io> wrote:
>
> Dear Mohammad and Aty
>
> Would you be willing to let me or us know the cost from ACMO?
> This seems very tempting to do myself?  Then have a rigger double check.  A lot of work, yes but interesting and tempting!
>
> Many thanks.
>
> Porter
>
> S/V IBIS 54-152
> Tahiti.
>
> Excuse the errors.
> Sent from my IPhone
> Www.fouribis.com
>
>> On Jun 6, 2019, at 11:19 PM, ngtnewington Newington via Groups.Io <ngtnewington=aol.com@groups.io> wrote:
>>
>> Thanks guys, it looks like if I order from ACMO then it is a straight swap. So that is what I will do.
>> I have thought hard about all this and at the end of the day I do not want to have that niggling feeling that my rigging is not up to it on a dark stormy night!
>> Nick
>>> On 7 Jun 2019, at 11:42, Mohammad Shirloo <mshirloo@...> wrote:
>>>
>>> Hello Nick;
>>>
>>> We are currently going though the same process and we have just released the order to ACMO.
>>>
>>> If ordered from ACMO, you will receive the entire parts required for the upgrade. This includes a “stronger” pin, as ACMO puts it, the turn buckles and threaded eye. I just again reconfirmed this with ACMO. If you look at your connections at the chain plates, the parts have an ACMO stamp on them.
>>>
>>> Therefore according to ACMO, no other parts will be necessary, it is just a matter of removing the existing shrouds and installing new.
>>>
>>> I will provide an update if we find anything that contradicts this during the install.
>>>
>>> Respectfully;
>>>
>>>
>>> Mohammad & Aty
>>> B&B Kokomo
>>> Amel 54 #099
>>>
>>>> On Jun 7, 2019, at 7:27 AM, ngtnewington Newington via Groups.Io <ngtnewington=aol.com@groups.io> wrote:
>>>>
>>>>
>>>> Further to the news that the Amel 54 should have 12mm aft lowers not 10mm and that the intermediates should be beefed up from 8mm to 10mm. I am now seriously working this out.
>>>> On the face of it I can order the replacement wire and fittings from ACMO in France and have it a week later. What worries me is that the pin sizes will increase (I guess)
>>>> This should be no problem at the bottom where there is a massive chainplate that I could drill out to accept the bigger pins but at the top at the spreader bases it will be tricky.
>>>> Has anyone been there and done this project?
>>>> What about sticking to 8mm and 10 mm but upgrading the wire quality to say Dyform? Dyform offers about 30% more strength than standard 1x19?
>>>> Any experts out there?
>>>> Nick
>>>> S/Y Amelia AML54-019
>>>> Anchored in Kefalonia enjoying easy living after 2000 mile voyage from Canary Islands.
>
>
>
>




Re: Standing rigging on 54

Mohammad Shirloo
 

Hi Roque;

The crack that we found was in the swagging and not in the wires. It was not considered a failure by either ACMO or our rigger. ACMO did acknowledge that at the time our rigging was swagged, they had an older machine that led to the crack and we were advised to simply keep an eye on it to make sure it does not get any bigger. The assumption was that the crack was there from day one.

However since we were going to upgrade the rest of the shrouds at the main, we decided to take care of this also so we don it have any questionable or potentially weak areas at the main.

We informed ACMO of the crack last month.


Mohammad & Aty
B&B Kokomo
Amel 54 #099

On Jun 11, 2019, at 3:44 PM, Roque via Groups.Io <ediroque@...> wrote:

Mohammad & Aty

I had a few cracked wires at the main too (#117). I reported this fact to ACMO in november 2018. 
  Would you care to tell when you informed ACMO about this failure? Was it last year? 

Thank you for you input. 

Roque
Attika A54 - 117
Santos - Brazil  


Em ter, 11 de jun de 2019 às 07:32, Mohammad Shirloo <mshirloo@...> escreveu:
Hello Porter;

I hope you guys are doing well and the engine issues are now behind you.

We are replacing all 6 shrouds at the main because ACMO had a crack in one of the original long shrouds that we found in our rig inspection last year.

They did extend a 10% discount because of this so the total shipped to Corfu was 5000 euros.

Off course you only need to upgrade the mid and lower shrouds so your pricing will be less. I did receive a complete quote for all rigging that I will forward to you shortly.

I, like you, try to do everything I can myself, which is about 90%. It’s better to make a mistake and learn while help is available. However, the cruising season in the Med is short so I do elect to use known outside people if necessary so we get to enjoy the season.

The rigging is definitely one of them, at this point, for us. So I’m flying Ricky from Malta to Corfu for 2 days to take care of the shrouds and some lighting and wind cane issues.

Enjoy Tahiti. We chartered there in 2008 and had a great time.


Mohammad & Aty
B&B Kokomo
Amel 54 #099

> On Jun 10, 2019, at 10:08 PM, Porter McRoberts via Groups.Io <portermcroberts=yahoo.com@groups.io> wrote:
>
> Dear Mohammad and Aty
>
> Would you be willing to let me or us know the cost from ACMO?
> This seems very tempting to do myself?  Then have a rigger double check.  A lot of work, yes but interesting and tempting!
>
> Many thanks.
>
> Porter
>
> S/V IBIS 54-152
> Tahiti.
>
> Excuse the errors.
> Sent from my IPhone
> Www.fouribis.com
>
>> On Jun 6, 2019, at 11:19 PM, ngtnewington Newington via Groups.Io <ngtnewington=aol.com@groups.io> wrote:
>>
>> Thanks guys, it looks like if I order from ACMO then it is a straight swap. So that is what I will do.
>> I have thought hard about all this and at the end of the day I do not want to have that niggling feeling that my rigging is not up to it on a dark stormy night!
>> Nick
>>> On 7 Jun 2019, at 11:42, Mohammad Shirloo <mshirloo@...> wrote:
>>>
>>> Hello Nick;
>>>
>>> We are currently going though the same process and we have just released the order to ACMO.
>>>
>>> If ordered from ACMO, you will receive the entire parts required for the upgrade. This includes a “stronger” pin, as ACMO puts it, the turn buckles and threaded eye. I just again reconfirmed this with ACMO. If you look at your connections at the chain plates, the parts have an ACMO stamp on them.
>>>
>>> Therefore according to ACMO, no other parts will be necessary, it is just a matter of removing the existing shrouds and installing new.
>>>
>>> I will provide an update if we find anything that contradicts this during the install.
>>>
>>> Respectfully;
>>>
>>>
>>> Mohammad & Aty
>>> B&B Kokomo
>>> Amel 54 #099
>>>
>>>> On Jun 7, 2019, at 7:27 AM, ngtnewington Newington via Groups.Io <ngtnewington=aol.com@groups.io> wrote:
>>>>
>>>>
>>>> Further to the news that the Amel 54 should have 12mm aft lowers not 10mm and that the intermediates should be beefed up from 8mm to 10mm. I am now seriously working this out.
>>>> On the face of it I can order the replacement wire and fittings from ACMO in France and have it a week later. What worries me is that the pin sizes will increase (I guess)
>>>> This should be no problem at the bottom where there is a massive chainplate that I could drill out to accept the bigger pins but at the top at the spreader bases it will be tricky.
>>>> Has anyone been there and done this project?
>>>> What about sticking to 8mm and 10 mm but upgrading the wire quality to say Dyform? Dyform offers about 30% more strength than standard 1x19?
>>>> Any experts out there?
>>>> Nick
>>>> S/Y Amelia AML54-019
>>>> Anchored in Kefalonia enjoying easy living after 2000 mile voyage from Canary Islands.
>
>
>
>




Re: Standing rigging on 54

Roque
 

Mohammad & Aty

I had a few cracked wires at the main too (#117). I reported this fact to ACMO in november 2018. 
  Would you care to tell when you informed ACMO about this failure? Was it last year? 

Thank you for you input. 

Roque
Attika A54 - 117
Santos - Brazil  


Em ter, 11 de jun de 2019 às 07:32, Mohammad Shirloo <mshirloo@...> escreveu:

Hello Porter;

I hope you guys are doing well and the engine issues are now behind you.

We are replacing all 6 shrouds at the main because ACMO had a crack in one of the original long shrouds that we found in our rig inspection last year.

They did extend a 10% discount because of this so the total shipped to Corfu was 5000 euros.

Off course you only need to upgrade the mid and lower shrouds so your pricing will be less. I did receive a complete quote for all rigging that I will forward to you shortly.

I, like you, try to do everything I can myself, which is about 90%. It’s better to make a mistake and learn while help is available. However, the cruising season in the Med is short so I do elect to use known outside people if necessary so we get to enjoy the season.

The rigging is definitely one of them, at this point, for us. So I’m flying Ricky from Malta to Corfu for 2 days to take care of the shrouds and some lighting and wind cane issues.

Enjoy Tahiti. We chartered there in 2008 and had a great time.


Mohammad & Aty
B&B Kokomo
Amel 54 #099

> On Jun 10, 2019, at 10:08 PM, Porter McRoberts via Groups.Io <portermcroberts=yahoo.com@groups.io> wrote:
>
> Dear Mohammad and Aty
>
> Would you be willing to let me or us know the cost from ACMO?
> This seems very tempting to do myself?  Then have a rigger double check.  A lot of work, yes but interesting and tempting!
>
> Many thanks.
>
> Porter
>
> S/V IBIS 54-152
> Tahiti.
>
> Excuse the errors.
> Sent from my IPhone
> Www.fouribis.com
>
>> On Jun 6, 2019, at 11:19 PM, ngtnewington Newington via Groups.Io <ngtnewington=aol.com@groups.io> wrote:
>>
>> Thanks guys, it looks like if I order from ACMO then it is a straight swap. So that is what I will do.
>> I have thought hard about all this and at the end of the day I do not want to have that niggling feeling that my rigging is not up to it on a dark stormy night!
>> Nick
>>> On 7 Jun 2019, at 11:42, Mohammad Shirloo <mshirloo@...> wrote:
>>>
>>> Hello Nick;
>>>
>>> We are currently going though the same process and we have just released the order to ACMO.
>>>
>>> If ordered from ACMO, you will receive the entire parts required for the upgrade. This includes a “stronger” pin, as ACMO puts it, the turn buckles and threaded eye. I just again reconfirmed this with ACMO. If you look at your connections at the chain plates, the parts have an ACMO stamp on them.
>>>
>>> Therefore according to ACMO, no other parts will be necessary, it is just a matter of removing the existing shrouds and installing new.
>>>
>>> I will provide an update if we find anything that contradicts this during the install.
>>>
>>> Respectfully;
>>>
>>>
>>> Mohammad & Aty
>>> B&B Kokomo
>>> Amel 54 #099
>>>
>>>> On Jun 7, 2019, at 7:27 AM, ngtnewington Newington via Groups.Io <ngtnewington=aol.com@groups.io> wrote:
>>>>
>>>>
>>>> Further to the news that the Amel 54 should have 12mm aft lowers not 10mm and that the intermediates should be beefed up from 8mm to 10mm. I am now seriously working this out.
>>>> On the face of it I can order the replacement wire and fittings from ACMO in France and have it a week later. What worries me is that the pin sizes will increase (I guess)
>>>> This should be no problem at the bottom where there is a massive chainplate that I could drill out to accept the bigger pins but at the top at the spreader bases it will be tricky.
>>>> Has anyone been there and done this project?
>>>> What about sticking to 8mm and 10 mm but upgrading the wire quality to say Dyform? Dyform offers about 30% more strength than standard 1x19?
>>>> Any experts out there?
>>>> Nick
>>>> S/Y Amelia AML54-019
>>>> Anchored in Kefalonia enjoying easy living after 2000 mile voyage from Canary Islands.
>
>
>
>




Re: Standing rigging on 54

Mohammad Shirloo
 

Hello Porter;

I hope you guys are doing well and the engine issues are now behind you.

We are replacing all 6 shrouds at the main because ACMO had a crack in one of the original long shrouds that we found in our rig inspection last year.

They did extend a 10% discount because of this so the total shipped to Corfu was 5000 euros.

Off course you only need to upgrade the mid and lower shrouds so your pricing will be less. I did receive a complete quote for all rigging that I will forward to you shortly.

I, like you, try to do everything I can myself, which is about 90%. It’s better to make a mistake and learn while help is available. However, the cruising season in the Med is short so I do elect to use known outside people if necessary so we get to enjoy the season.

The rigging is definitely one of them, at this point, for us. So I’m flying Ricky from Malta to Corfu for 2 days to take care of the shrouds and some lighting and wind cane issues.

Enjoy Tahiti. We chartered there in 2008 and had a great time.


Mohammad & Aty
B&B Kokomo
Amel 54 #099

On Jun 10, 2019, at 10:08 PM, Porter McRoberts via Groups.Io <portermcroberts=yahoo.com@groups.io> wrote:

Dear Mohammad and Aty

Would you be willing to let me or us know the cost from ACMO?
This seems very tempting to do myself? Then have a rigger double check. A lot of work, yes but interesting and tempting!

Many thanks.

Porter

S/V IBIS 54-152
Tahiti.

Excuse the errors.
Sent from my IPhone
Www.fouribis.com

On Jun 6, 2019, at 11:19 PM, ngtnewington Newington via Groups.Io <ngtnewington=aol.com@groups.io> wrote:

Thanks guys, it looks like if I order from ACMO then it is a straight swap. So that is what I will do.
I have thought hard about all this and at the end of the day I do not want to have that niggling feeling that my rigging is not up to it on a dark stormy night!
Nick
On 7 Jun 2019, at 11:42, Mohammad Shirloo <mshirloo@...> wrote:

Hello Nick;

We are currently going though the same process and we have just released the order to ACMO.

If ordered from ACMO, you will receive the entire parts required for the upgrade. This includes a “stronger” pin, as ACMO puts it, the turn buckles and threaded eye. I just again reconfirmed this with ACMO. If you look at your connections at the chain plates, the parts have an ACMO stamp on them.

Therefore according to ACMO, no other parts will be necessary, it is just a matter of removing the existing shrouds and installing new.

I will provide an update if we find anything that contradicts this during the install.

Respectfully;


Mohammad & Aty
B&B Kokomo
Amel 54 #099

On Jun 7, 2019, at 7:27 AM, ngtnewington Newington via Groups.Io <ngtnewington=aol.com@groups.io> wrote:


Further to the news that the Amel 54 should have 12mm aft lowers not 10mm and that the intermediates should be beefed up from 8mm to 10mm. I am now seriously working this out.
On the face of it I can order the replacement wire and fittings from ACMO in France and have it a week later. What worries me is that the pin sizes will increase (I guess)
This should be no problem at the bottom where there is a massive chainplate that I could drill out to accept the bigger pins but at the top at the spreader bases it will be tricky.
Has anyone been there and done this project?
What about sticking to 8mm and 10 mm but upgrading the wire quality to say Dyform? Dyform offers about 30% more strength than standard 1x19?
Any experts out there?
Nick
S/Y Amelia AML54-019
Anchored in Kefalonia enjoying easy living after 2000 mile voyage from Canary Islands.



Re: TMD22 Emergency Shutoff

David Cummane
 

The diesel dipstick works very accurately when it matters - with low fuel. A few months ago it read around 3 litres left in the tank and no problems.

David
SM#101


Solar tax incentive -- ending soon

Kelly Ran
 

For fellow Americans --

If you didn't already know: you can claim a substantial tax credit for solar on your Amel. You can get 30% of the solar installation cost back as a tax credit. The incentive will decrease for solar installed in 2020 and 2021, and then it'll cease to exist (for residential) in 2022. I'm pretty sure the incentive applies retroactively too, but I'm not completely sure.

We successfully got 30% of our costs back for our 2018 solar panel installation. 

and tons more info online.

(Obviously consult with a tax professional, etc etc.)

Cheers,
Kelly + Ryan
SM233 Iteration
Boston


Re: BamarMEJ1.02 furling motor

ngtnewington Newington
 

I am only interested in the motors
Nick

On 11 Jun 2019, at 01:54, Arno Luijten <arno.luijten@...> wrote:

Hi Nick,

I have a working set of original furlers for sale, they are located in St Martin. There is an earlier post of me on the forum with some pictures

Regards,

Arno Luijten
SV Luna,
A54-121


Re: TMD22 Emergency Shutoff

John Clark
 

Bill, there is a lever next to the point where the throttle cable connects to the engine.  Lift/ twist the lever and it cuts off the fuel supply just like the shut off solenoid would if there was power.

I painted mine bright pink(only highvis color available in Marin) so other crew could find it fast.

On Sun, Jun 9, 2019, 10:14 PM Jean Boucharlat <jean.boucharlat@...> wrote:

Yes, stopping the air input does work, but…it can be seriously hazardous to the palm of your hand if you do it by hand as the depression is quite strong. On the other hand (pun intended), if you use rags, they will be sucked into the engine. So some caution is necessary with this method.

 

Jean Boucharlat

Formerly SM 232

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of jlm@...
Sent: dimanche 9 juin 2019 20:47
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] TMD22 Emergency Shutoff

 

Wery easy to do you stop the fresh air input .....:-)

JLMERTZ

CottonBay


 

Le 09/06/2019 à 20:23, CW Bill Rouse a écrit :

What is the best way to shut off a TMD22 when there is no power available to use the normal shut off method?

--

 

Best,

 

Bill Rouse
Yacht School  
720 Winnie St
Galveston Island, TX 77550

+1(832) 380-4970

 

Garanti sans virus. www.avast.com