Date   

Re: Standing rigging - France

Mark Garver <mgarver@...>
 

Congratulations Mark! Our SM, It's Good is #105 also from 1993 and we love her, she has been very good to us. Welcome to the family, or the cult! :)

Mark and Jennifer Garver
SV It's Good
SM #105

On October 9, 2019 at 8:34 AM, Mark Barter <markbarter100@...> wrote:

We are now the very proud new owners of Nunky which is SM110 from 1993. 

Despite her age Nunky is in incredible condition due to the care her former owner lavished on her. As an example, he would only wear white below decks.

Anyway, the only major work required is replacement of the standing rigging. I have a quote for the rigging from ACMO but I need a rigger in The South of France. Nunky is currently in Golfe Juan for the winter.

If anyone can recommend a rigger I would be very grateful. 

Many thanks




Re: Standing rigging - France

 

Mark,

I am very happy that this worked out for you.

I have a Preferred Vendor in Malta who often travels Europe to install rigging. I highly recommend that you contact Nicky Sammut to install your ACMO rigging:
Nicky’s Rigging & Marine Services
Mobile +356 79271668
Email. nickysail"at"hotmail.com
ACMO is a recommended Preferred Vendor and will give you a discount. Be sure to share that quote with me to insure the discount.

Nicky has replaced ACMO rigging with ACMO kits on many SMs and 54s. He has also replaced Bamar Furlers on 54s with new generation Bamar and with Reckman furlers. I can assure you that you will not find a better rigger anywhere. He routinely works in Malta at Manoel Island Yacht Yard, which is also a Preferred Vendor and a great yard to haulot. Be sure to tell these Preferred Vendors that you are a client of mine in order to receive your discount.
Manoel Island Yacht Yard
Gzira GZR 3013,
Malta – Europe
General Email: info"at"yachtyard-malta.com Phone: (+356) 2133 4453/4 also Andrew Wilson <AWilson"at"yachtyard-malta.com>

If you haulout at Manoel, be sure to have antifouling and polishing applied by Alex and his uncle: Contact for Alex is ‎boatcarealex"at"gmail.com
‎Mobile Phone +356 9942 9724. They are fabulous. Tell Alex that you are a client.

Bill
--
CW Bill Rouse Amel Yacht Owners School
Address: 720 Winnie, Galveston Island, Texas 77550 
   


On Wed, Oct 9, 2019 at 8:16 AM ianjenkins1946 <ianjudyjenkins@...> <ianjudyjenkins@...> wrote:
Hi Mark , 

Welcome to the Amel world . We used the riggers recommended by Amel’s Hyeres office . They really know their stuff . Can’t remember the name of the company but a call to Sonja in that office will direct you to them . 

Ian and Judy , Pen Azen , SM 302 Serifos 


On 9 Oct 2019, at 15:34, Mark Barter <markbarter100@...> wrote:

We are now the very proud new owners of Nunky which is SM110 from 1993. 

Despite her age Nunky is in incredible condition due to the care her former owner lavished on her. As an example, he would only wear white below decks.

Anyway, the only major work required is replacement of the standing rigging. I have a quote for the rigging from ACMO but I need a rigger in The South of France. Nunky is currently in Golfe Juan for the winter.

If anyone can recommend a rigger I would be very grateful. 

Many thanks


Re: SM Bow thruster wiring diagram?

 

Andrew, he probably has the older version.

Eamonn,

There is a micro switch inside the control box which should be controlled by the rod and attached arm.

Here is a photo of part of a page from my Amel Book that might help. My guess is that the new arm was fabricated incorrectly, or the micro switch is not working.
image.png


--
CW Bill Rouse Amel Yacht Owners School
Address: 720 Winnie, Galveston Island, Texas 77550 
   


On Wed, Oct 9, 2019 at 7:57 AM Andrew & Kate Lamb <andrew.lamb@...> wrote:

Hi

 

This is the diagram I have

 

Andrew

SM472

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Eamonn Washington
Sent: Wednesday, October 9, 2019 2:41 PM
To: main@AmelYachtOwners.groups.io
Subject: [AmelYachtOwners] SM Bow thruster wiring diagram?

 

Hi

our bow thruster suddenly decided it would not  come up. The electric motor was fine, everything was connected.  I got a local mechanic to come in and he repaired the bow thruster in his workshop.  He said that there was a rod about 20cm long with a screw thread that had completely worn out, so he made a new screw thread.

The problem appears now to be that he made the new thread the wrong way around.  We figured out by experimentation that if we switched wires 3 and 6 in the little control box that the bow thruster up and down movement worked perfectly.  However the sideways movement stopped working, so that is no good.

Does anyone know the wiring diagram of this little control box in the fore cabin on the bow thruster?  I would love to be able to fix it by swapping around a couple of wires rather than waiting  a few days for a new part to be made or waiting for a delivery from Amel (if they  have it).

Eamonn Washington
Travel Bug
Super Maramu #151
Currently in Denia, Spain.


Re: SM Bow thruster wiring diagram?

Eamonn Washington
 

Hi thanks for the diagram.  It does not show the numbered wires in the box, but it might help.  I also contacted Amel to see if they can provide the correct jack screw.

Eamonn Washington
Travel Bug
Super Maramu #151
Currently in Denia, Spain.


Re: Annapolis Boat Show

Matt Salatino
 

Mangia, right?
Friday?

~~~⛵️~~~Matt

On Oct 9, 2019, at 8:18 AM, Patrick McAneny via Groups.Io <sailw32@...> wrote:

Gary, I was able to reserve a table for 16, and 17 signed up for that table  a week or so ago. Since then Aras contacted Mangia and was able to reserve a table for four or six I think , they may hold the top floor for us ,as it is not too big. So I think there will be a seat for every .... 
Funny, when I suggested to another couple of owners to get together for diner ,I expected four to six. It now looks like over 20 . Same thing happened with the Chesapeake  Bay Rendezvous. Birds of a feather ...
See ya there,
Pat & Diane
SM Shenanigans


-----Original Message-----
From: Gary Wells <gary@...>
To: main <main@AmelYachtOwners.groups.io>
Sent: Tue, Oct 8, 2019 3:42 pm
Subject: Re: [AmelYachtOwners] Annapolis Boat Show

[Edited Message Follows]
*** EDIT***  We have another couple coming to join us so the table is full. :)

Really late in the game here but Robin and I will be able to attend the big event.  Even though the restaurant said their reservations were "maxed out" once I dropped the "Amel" name I got put on hold, then I got told I'd get a call back and in fact they let us have a table at 7:00 P.M.
Better late than never :)

~AND~ it's a table for four so if there is another couple wanting seats let me know and you are welcome to join us. 

Looking forward to seeing everyone!

Gary & Robin

SM 209, Adagio
Galesville, MD


Re: Standing rigging - France

ianjenkins1946 <ianjudyjenkins@hotmail.com>
 

Hi Mark , 

Welcome to the Amel world . We used the riggers recommended by Amel’s Hyeres office . They really know their stuff . Can’t remember the name of the company but a call to Sonja in that office will direct you to them . 

Ian and Judy , Pen Azen , SM 302 Serifos 


On 9 Oct 2019, at 15:34, Mark Barter <markbarter100@...> wrote:

We are now the very proud new owners of Nunky which is SM110 from 1993. 

Despite her age Nunky is in incredible condition due to the care her former owner lavished on her. As an example, he would only wear white below decks.

Anyway, the only major work required is replacement of the standing rigging. I have a quote for the rigging from ACMO but I need a rigger in The South of France. Nunky is currently in Golfe Juan for the winter.

If anyone can recommend a rigger I would be very grateful. 

Many thanks


Re: Standing rigging - France

Mark Barter
 

Hi Andrew,

We are very excited. We kissed a few frogs before we came across Nunky but it was worth it.

I am looking forward to participating in this community. I should be able to add quite a bit because the former owner was an incredible engineer and some of the modifications he made are very clever.

Kind regards
Mark
--
Mark & Nicky Barter
S/V Nunky
SM 110


Re: Standing rigging - France

Andrew & Kate Lamb
 

Hi Mark

 

Congratulations! Bet you guys are really excited! There are riggers in Canet but I don’t know if they are any good I am afraid.

 

Andrew

SM 472

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Mark Barter
Sent: Wednesday, October 9, 2019 2:34 PM
To: main@AmelYachtOwners.groups.io
Subject: [AmelYachtOwners] Standing rigging - France

 

We are now the very proud new owners of Nunky which is SM110 from 1993. 

Despite her age Nunky is in incredible condition due to the care her former owner lavished on her. As an example, he would only wear white below decks.

Anyway, the only major work required is replacement of the standing rigging. I have a quote for the rigging from ACMO but I need a rigger in The South of France. Nunky is currently in Golfe Juan for the winter.

If anyone can recommend a rigger I would be very grateful. 

Many thanks


Re: SM Bow thruster wiring diagram?

Andrew & Kate Lamb
 

Hi

 

This is the diagram I have

 

Andrew

SM472

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Eamonn Washington
Sent: Wednesday, October 9, 2019 2:41 PM
To: main@AmelYachtOwners.groups.io
Subject: [AmelYachtOwners] SM Bow thruster wiring diagram?

 

Hi

our bow thruster suddenly decided it would not  come up. The electric motor was fine, everything was connected.  I got a local mechanic to come in and he repaired the bow thruster in his workshop.  He said that there was a rod about 20cm long with a screw thread that had completely worn out, so he made a new screw thread.

The problem appears now to be that he made the new thread the wrong way around.  We figured out by experimentation that if we switched wires 3 and 6 in the little control box that the bow thruster up and down movement worked perfectly.  However the sideways movement stopped working, so that is no good.

Does anyone know the wiring diagram of this little control box in the fore cabin on the bow thruster?  I would love to be able to fix it by swapping around a couple of wires rather than waiting  a few days for a new part to be made or waiting for a delivery from Amel (if they  have it).

Eamonn Washington
Travel Bug
Super Maramu #151
Currently in Denia, Spain.


SM Bow thruster wiring diagram?

Eamonn Washington
 

Hi

our bow thruster suddenly decided it would not  come up. The electric motor was fine, everything was connected.  I got a local mechanic to come in and he repaired the bow thruster in his workshop.  He said that there was a rod about 20cm long with a screw thread that had completely worn out, so he made a new screw thread.

The problem appears now to be that he made the new thread the wrong way around.  We figured out by experimentation that if we switched wires 3 and 6 in the little control box that the bow thruster up and down movement worked perfectly.  However the sideways movement stopped working, so that is no good.

Does anyone know the wiring diagram of this little control box in the fore cabin on the bow thruster?  I would love to be able to fix it by swapping around a couple of wires rather than waiting  a few days for a new part to be made or waiting for a delivery from Amel (if they  have it).

Eamonn Washington
Travel Bug
Super Maramu #151
Currently in Denia, Spain.


Standing rigging - France

Mark Barter
 

We are now the very proud new owners of Nunky which is SM110 from 1993. 

Despite her age Nunky is in incredible condition due to the care her former owner lavished on her. As an example, he would only wear white below decks.

Anyway, the only major work required is replacement of the standing rigging. I have a quote for the rigging from ACMO but I need a rigger in The South of France. Nunky is currently in Golfe Juan for the winter.

If anyone can recommend a rigger I would be very grateful. 

Many thanks


Re: Annapolis Boat Show

Patrick McAneny
 

Gary, I was able to reserve a table for 16, and 17 signed up for that table  a week or so ago. Since then Aras contacted Mangia and was able to reserve a table for four or six I think , they may hold the top floor for us ,as it is not too big. So I think there will be a seat for every .... 
Funny, when I suggested to another couple of owners to get together for diner ,I expected four to six. It now looks like over 20 . Same thing happened with the Chesapeake  Bay Rendezvous. Birds of a feather ...
See ya there,
Pat & Diane
SM Shenanigans


-----Original Message-----
From: Gary Wells <gary@...>
To: main <main@AmelYachtOwners.groups.io>
Sent: Tue, Oct 8, 2019 3:42 pm
Subject: Re: [AmelYachtOwners] Annapolis Boat Show

[Edited Message Follows]
*** EDIT***  We have another couple coming to join us so the table is full. :)

Really late in the game here but Robin and I will be able to attend the big event.  Even though the restaurant said their reservations were "maxed out" once I dropped the "Amel" name I got put on hold, then I got told I'd get a call back and in fact they let us have a table at 7:00 P.M.
Better late than never :)

~AND~ it's a table for four so if there is another couple wanting seats let me know and you are welcome to join us. 

Looking forward to seeing everyone!

Gary & Robin

SM 209, Adagio
Galesville, MD


Re: A54 fridge circulation pump

Oliver Henrichsen, SV Vela Nautica
 

Hi guys,

Here is what we used:

I did reuse the flowjet pump and replaced the motor by a brushless scooter motor. These motors are very strong and got no wear parts except the ballbearings for less then 2 euros.
I mounted the motor on an L shaped 6mm aluminium and the pump from the oposite side.
The D shaped 8mm shaft is the same like the original flowjet shaft.
The motor is driven by 60% speed and works flawless while over sized. It takes less ten 1A at 24 V pushing 10 liter per min.
The motor does not get warm at all = no wasted energy, as before.
It would be possible to controll the wateroutput according to raw water temperature. I did not use this feature jet.

To drive a brushless motor, it needs a speedcontroller. I used the VESC for it, also way oversizedwhile capable to controll high currents.
We connect the 24v batterie directly to the VESC. No more using step down to 12 V wasting more energy.

The motor/pump speed is open to be controlled from 0 to 100%

€ 50,91 | ESK8 6368 BLDC outrunner bürstenlosen motor 190KV 280KV sensored sensorlose 22-48 V für elektrische balancing roller e- skateboard
https://s.click.aliexpress.com/e/2Yrn2Uz6

D-shaped shaft 190 kv, shaft has 8mm diameter, sensored.

€ 55,36 36%OFF | FSESC 4,12 50A Basierend auf VESC 4,12 Elektro Speed Controller für Skateboard/E-roller Zubehör Flipsky
https://s.click.aliexpress.com/e/rkgt1kV2

We use it now without any failing pump anymore.

Oliver from
VELANAUTICA.ORG
AMEL 54#39

PORTUGAL

Sent from my Huawei Mobile


-------- Original Message --------
Subject: Re: [AmelYachtOwners] A54 fridge circulation pump
From: Sv Garulfo
To: main@AmelYachtOwners.groups.io
CC:


Hi Oliver

We would be interested in the details of the brushless motor and motor controller as it has been the same in our case ( pump still working, only brushes wear out). 

Thanks for your help. 

Soraya
Garulfo A54#122
Tuamotus, French Polynesia 


On 23 Sep 2019, at 22:16, Oliver Henrichsen, SV Vela Nautica <oliver.henrichsen@...> wrote:

Hello,

We got 1 fridge and freezer in our boat, we gave the freezer in the pantry a complete refit.

1. Step is to refit AMEL freezer insulations. We removed the complete old imsulation. Sorry to say but it was poorly build in terms of condens water block, open sidecuts at the old foam boards so the foam was soaked with condens. Beside tha this foam is only max 60mm what is not enough for tropics. Because of limited space we choose most efficient isolation boards.
It needs to remove the complete freezer. The only way to do so was to enter from the top and chop the wooden boards, also soaked with water and mould. Wood is not a propper insulation for freezers.
2. Step ist to install a condenswater block membrane.
3. Step install install sandwich vacum boards. These boards got factor 5 of insulation against standard closed cell foam. So with 6cm it eaquals 20 to 24 cm foam.
4. We reused the original stainless inside case. The hole process needs extremly carefull work that there is not the tinies hole left for condens water to enter. What you get is insulated like a thermos bottle.

With this upgrade of freezer the compressor stops 24h working and with that the cooling pump. But we did not touch the fridge. With that we got on times of freezer of 2h per day and fridge of 3h per day. The new controller cares that both units will work at the same time when ever possible. Example: so the cool pump wont run first for the fridge and 5 mins later when the freezer starts it will rum again. The "intelligent"
Controler cares that operating times are bundled.
We got these operating times with 30 degrees outside temperatures.

I did not change the pump, I changed the pump motor and motor controller to brushless. My pumps never failed it was always the brushed motor and bearings that wore out.

With these steps the cooling system works efficient.

I will look for the brands i used later and post it.

Oliver
A54#39
Portugal



Sent from my Huawei Mobile


-------- Original Message --------
Subject: Re: [AmelYachtOwners] A54 fridge circulation pump
From: Scott SV Tengah
To: main@AmelYachtOwners.groups.io
CC:


Oliver,

Could you tell us more about upgrading/replacing the freezer insulation? I assume you mean the one under the settee? 

Did you scrape off all the old insulation and replace? What model vacuum boards did you use? I, too, notice that my freezer compressor is running 24h.

--
Scott 
2007 A54 #69
SV Tengah
http://www.svtengah.com


Re: A54 fridge circulation pump and a New Source for Marco Pumps

Alan Leslie
 

Eric,
Everywhere outside of North America uses BSP.
NPT is a US invention.
Cheers
Alan
Elyse SM437


Re: Annapolis Boat Show

Alan Grayson
 

I don’t want to promise but I will try but if not then it’s lucky that Davis will still sell me cold beer even if your not there.
Best
Alan


From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> on behalf of Mike Ondra via Groups.Io <mdondra@...>
Sent: Tuesday, October 8, 2019 2:43:11 PM
To: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io>
Subject: Re: [AmelYachtOwners] Annapolis Boat Show
 

So it sounds like you will not be joining us for the maintenance discussions at 2:00 on Aletes?

Depending on how that goes we may not get to Davis’ til 5:30ish.

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Alan Grayson
Sent: Tuesday, October 8, 2019 12:34 PM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] Annapolis Boat Show

 

Hi Mike, 5.00ish it is.
Regards
Alan Grayson
SM406 Ora Pai


From: main@... <main@AmelYachtOwners.groups.io> on behalf of Mike Ondra via Groups.Io <mdondra@...>
Sent: Monday, 7 October 2019 6:32:17 PM
To:
main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io>
Subject: Re: [AmelYachtOwners] Annapolis Boat Show

 

I checked with Davis’ Pub (Eastport) for Thursday evening. They do not take reservations but said they are not too busy between 5:00 and 6:00 so seating for 10 or so should not be a problem. Let’s shoot for 5:30. Alan and Kent/Iris have expressed interest in dinner. All are welcome aboard Aletes earlier in the afternoon to talk about the exciting topic of Amel maintenance.  Please confirm attendance at either event. Looking forward it!

Mike Ondra

Aletes SM#240

 

From: Mike Ondra <mdondra@...>
Sent: Saturday, October 5, 2019 9:08 AM
To: 'main@AmelYachtOwners.groups.io' <main@AmelYachtOwners.groups.io>
Subject: RE: [AmelYachtOwners] Annapolis Boat Show

 

For the maintenance/repairs “forum” (sounds way too formal) I have RSVP’s so far from Jay Pokorski and Charles (SV Saturn). We’ll meet on Aletes (anchored at the mouth of Back  Creek…unless weather pushes an alternative anchorage…will advise) at 2:00 Thursday afternoon. Anyone land based or dinghy deprived that wants to attend let us know and we can arrange a pickup. Anyone is welcome to join us for beverages and dinner afterwards at Davis’ Pub.

Mike Ondra

Aletes SM#240

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Mike Ondra via Groups.Io
Sent: Monday, September 30, 2019 4:51 PM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] Annapolis Boat Show

 

Aletes would like to host an Amel maintenance/repair forum on board either Thurs or Friday afternoon of Boat Show week. The idea would be to share everyone’s experiences with some of the unique equipment on our vessels.

 

Possible topics, and please add to the list, might include:

Bow Thrusters, furling gearboxes (motorized and manual), battery strategies, deck finish (restoration and striping), anti-fouling, hard-won lessons and other tricks.

 

We’ll do it if there is interest, so let me know which day and additional topics. Bring your issues and get the insights of others.

 

Mike Ondra

Aletes SM#240

Rock Hall, Chesapeake Bay


Re: A54 fridge circulation pump and a New Source for Marco Pumps

eric freedman
 

That’s odd that they use BSP and not NPT.

Thanks

Eric

 

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of CW Bill Rouse
Sent: Tuesday, October 08, 2019 6:59 PM
To: main@amelyachtowners.groups.io
Subject: Re: [AmelYachtOwners] A54 fridge circulation pump and a New Source for Marco Pumps

 

Italy which happens to historically be the country of better marine pumps. 

Best,

CW Bill Rouse
Amel Yacht Owners School - www.AmelYachtOwnersSchool.com
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970

 

On Tue, Oct 8, 2019, 5:13 PM eric freedman <kimberlite@...> wrote:

Hi Bill,

Where are these pumps made?

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of CW Bill Rouse
Sent: Tuesday, October 08, 2019 3:12 PM
To: main@amelyachtowners.groups.io
Subject: Re: [AmelYachtOwners] A54 fridge circulation pump and a New Source for Marco Pumps

 

Eric 

 

BSP 3/8" on the UP/2

 

 


--

CW Bill Rouse Amel Yacht Owners School

Address: 720 Winnie, Galveston Island, Texas 77550 

   

 

 

 

On Tue, Oct 8, 2019 at 2:00 PM eric freedman <kimberlite@...> wrote:

Are those pumps a BSP thread or a NPT thread?

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of Scott SV Tengah
Sent: Tuesday, October 08, 2019 1:16 PM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] A54 fridge circulation pump and a New Source for Marco Pumps

 

To expand on Bill's expansion :), replacing the rotor cap requires unbolting the old one and swapping out the new one.  I would get the seal kit, too. It's only 8 euro or so. Includes the shaft lip seal and a replacement bearing.

Every A54 seems to be different (!?!?) but to use the Marco on mine required me to buy hose barb adapters. I got these:

https://www.ebay.com/itm/Male-Thread-Pipe-Fitting-x-Barb-Hose-Tail-Connector-BSP-Stainless-Steel-ark/253006828611?ssPageName=STRK%3AMEBIDX%3AIT&var=552054492119&_trksid=p2060353.m2749.l2649

I got the 3/8" BSP x 15mm barb. The BSP end is for the pump and the barb end is for my existing hoses. You will need 2 of these.

 


--
Scott 
2007 A54 #69
SV Tengah
http://www.svtengah.com


Re: Autopilot

 

Yep, steering cable for sure. 

Best,

CW Bill Rouse
Amel Yacht Owners School - www.AmelYachtOwnersSchool.com
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970

On Tue, Oct 8, 2019, 2:57 PM Mark & Debbie Mueller <brass.ring@...> wrote:
I believe Arno is correct, the original photo shows the terminal end of the steering cable.  The attached photo shows a larger perspective and where the cable end attaches to the quadrant.  The linear drive attachment is toward the top of the photo.
-- 
Brass Ring  A54


Re: A54 fridge circulation pump and a New Source for Marco Pumps

 

Italy which happens to historically be the country of better marine pumps. 

Best,

CW Bill Rouse
Amel Yacht Owners School - www.AmelYachtOwnersSchool.com
720 Winnie St
Galveston Island, TX 77550
+1(832) 380-4970

On Tue, Oct 8, 2019, 5:13 PM eric freedman <kimberlite@...> wrote:

Hi Bill,

Where are these pumps made?

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of CW Bill Rouse
Sent: Tuesday, October 08, 2019 3:12 PM
To: main@amelyachtowners.groups.io
Subject: Re: [AmelYachtOwners] A54 fridge circulation pump and a New Source for Marco Pumps

 

Eric 

 

BSP 3/8" on the UP/2

 

 


--

CW Bill Rouse Amel Yacht Owners School

Address: 720 Winnie, Galveston Island, Texas 77550 

   

 

 

 

On Tue, Oct 8, 2019 at 2:00 PM eric freedman <kimberlite@...> wrote:

Are those pumps a BSP thread or a NPT thread?

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of Scott SV Tengah
Sent: Tuesday, October 08, 2019 1:16 PM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] A54 fridge circulation pump and a New Source for Marco Pumps

 

To expand on Bill's expansion :), replacing the rotor cap requires unbolting the old one and swapping out the new one.  I would get the seal kit, too. It's only 8 euro or so. Includes the shaft lip seal and a replacement bearing.

Every A54 seems to be different (!?!?) but to use the Marco on mine required me to buy hose barb adapters. I got these:

https://www.ebay.com/itm/Male-Thread-Pipe-Fitting-x-Barb-Hose-Tail-Connector-BSP-Stainless-Steel-ark/253006828611?ssPageName=STRK%3AMEBIDX%3AIT&var=552054492119&_trksid=p2060353.m2749.l2649

I got the 3/8" BSP x 15mm barb. The BSP end is for the pump and the barb end is for my existing hoses. You will need 2 of these.

 


--
Scott 
2007 A54 #69
SV Tengah
http://www.svtengah.com


Re: A54 fridge circulation pump and a New Source for Marco Pumps

eric freedman
 

Hi Bill,

Where are these pumps made?

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of CW Bill Rouse
Sent: Tuesday, October 08, 2019 3:12 PM
To: main@amelyachtowners.groups.io
Subject: Re: [AmelYachtOwners] A54 fridge circulation pump and a New Source for Marco Pumps

 

Eric 

 

BSP 3/8" on the UP/2

 

 


--

CW Bill Rouse Amel Yacht Owners School

Address: 720 Winnie, Galveston Island, Texas 77550 

   

 

 

 

On Tue, Oct 8, 2019 at 2:00 PM eric freedman <kimberlite@...> wrote:

Are those pumps a BSP thread or a NPT thread?

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of Scott SV Tengah
Sent: Tuesday, October 08, 2019 1:16 PM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] A54 fridge circulation pump and a New Source for Marco Pumps

 

To expand on Bill's expansion :), replacing the rotor cap requires unbolting the old one and swapping out the new one.  I would get the seal kit, too. It's only 8 euro or so. Includes the shaft lip seal and a replacement bearing.

Every A54 seems to be different (!?!?) but to use the Marco on mine required me to buy hose barb adapters. I got these:

https://www.ebay.com/itm/Male-Thread-Pipe-Fitting-x-Barb-Hose-Tail-Connector-BSP-Stainless-Steel-ark/253006828611?ssPageName=STRK%3AMEBIDX%3AIT&var=552054492119&_trksid=p2060353.m2749.l2649

I got the 3/8" BSP x 15mm barb. The BSP end is for the pump and the barb end is for my existing hoses. You will need 2 of these.

 


--
Scott 
2007 A54 #69
SV Tengah
http://www.svtengah.com


Re: Annapolis Boat Show

Matt Salatino
 

We’re already signed up.
This is the Italian place right at the circle, right?

~~~⛵️~~~Matt

On Oct 7, 2019, at 10:54 AM, Gary Wells <gary@...> wrote:

[Edited Message Follows]

*** EDIT***  We have another couple coming to join us so the table is full. :)

Really late in the game here but Robin and I will be able to attend the big event.  Even though the restaurant said their reservations were "maxed out" once I dropped the "Amel" name I got put on hold, then I got told I'd get a call back and in fact they let us have a table at 7:00 P.M.

Better late than never :)

~AND~ it's a table for four so if there is another couple wanting seats let me know and you are welcome to join us. 

Looking forward to seeing everyone!

Gary & Robin

SM 209, Adagio
Galesville, MD