|
Re: SM2K: Replacing a CLIMMA 9EH AC unit in the Salon
#replacement
No problem Nick, enjoy your Amel.
|
|
|
|
Re: Back up tablet navigation aid
AquaMaps. It has active captain.
toggle quoted messageShow quoted text
Navionics is also good. ~~~⛵️~~~Matt
On Oct 18, 2019, at 3:35 PM, Rob Hughes via Groups.Io <svluna01@...> wrote:
|
|
|
|
Re: SM2K: Replacing a CLIMMA 9EH AC unit in the Salon
#replacement
eric freedman <kimberlite@...>
The unit took me about 2 hours to install. I installed mine in the aft cabin .On 90 degree days it can cool my cabin like a meat locker.
toggle quoted messageShow quoted text
There is larger unit if you think you need more BTU'S, It is the same size. The thermostat is digital and whats really great as it has a phone type cord connecting the sensor on the coil to the thermostat. Fair Winds, Eric
On October 18, 2019 at 3:30 PM "Nicolas Klene via Groups.Io" <laixoi@...> wrote:
|
|
|
|
Back up tablet navigation aid
I just bought a new ios tablet to use as a secondary plotter. What programs are you using? and what to stay away from. sailing the Bahamas and Caribbean.
|
|
|
|
Re: SM2K: Replacing a CLIMMA 9EH AC unit in the Salon
#replacement
Hi Eric
Sorry to come back to you but the following model is 8000 BTU even if it's called 6K ? I guess plug & play didn't require adjurent size wize under the sofa ? By the way i'm not the proud owner of SM 476 ,Steven is ,mine is SM 471! Sorry Steven Nick SV "TO BE NAMED SOON" SM471 Dometic model DTU 6k 230 vac 60 hz 410
|
|
|
|
Re: A54 - bow roller hooks
Annsofie & Jonas Svanberg <ann-sofie@...>
That looks very complicated.
toggle quoted messageShow quoted text
We have one line, 24-30 mm diameter, with a spliced eye that fits on the center cleet, and then a fixed lengt with a hook in the end. Hälsningar Ann-Sofie Svanberg
18 okt. 2019 kl. 16:56 skrev Stefan Schaufert <mail@...>:
|
|
|
|
Re: Onan MDKD 6.5kW genset exhaust elbow
Paul Dowd and Sharon Brown
You can get one from Seapower Marine in the UK for £425 + VAT (20%). http://www.seapowermarine.co.uk
I have enquired about getting a discount for ordering several, and also to see if the VAT is not applicable for non-UK residents (which I believe should be the case).
Cheers, Paul S/Y Ya Fohi - Amel 54 #98
From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Karen Smith via Groups.Io
Mark, -- Cheers Paul Ya Fohi - Amel 54 #98
|
|
|
|
Re: A54 - bow roller hooks
Stefan Schaufert
Dear Thomas, dear Ameliens,
|
|
|
|
Re: SM2K: Replacing a CLIMMA 9EH AC unit in the Salon
#replacement
Hello Everybody
|
|
|
|
Re: Onan MDKD 6.5kW genset exhaust elbow
Miles
Keran, Mark,
If anyone winds up having a genset exhaust elbow made, I would like to have one also. Maybe added numbers will reduce the unit cost.
Miles Bidwell
s/y Ladybug, sm216 Newport, RI soon leaving for Martinique
|
|
|
|
Re: Onan MDKD 6.5kW genset exhaust elbow
Karen Smith
Mark,
From the local Onan dealer we were quoted $1600, still pretty crazy. The internal geometry of the part is complex, with a partial water jacket, and they are typically investment cast. There is a shop that will make the molds, but they need a part to cut open so they can measure and duplicate the internal geometry, and it takes a minimum of 8 weeks. If we could find an old one, we'd start that process while ours is still limping along. We were lucky--this time--that the salt water spray from the leaking elbow didn't hit anything fragile or important. It could easily have soaked and destroyed our battery charger, or the electrical end of the generator. We do not consider JBWeld to be anything other than a very short term emergency repair to be made right as soon as possible, however that is done.
|
|
|
|
Re: Onan MDKD 6.5kW genset exhaust elbow
Mark McGovern
Orion,
The exhaust elbow is a relatively complex geometry that also fits into a fairly tight space. While I am sure replicating it from measurements and sketches alone could be done, the chances of getting something wrong would be pretty high. Here is a picture of one for reference: https://amelyachtowners.groups.io/g/main/photo/84403/13?p=Name,,onan,20,1,0,0 -- Mark McGovern SM #440 Cara Deale, MD USA
|
|
|
|
Re: Companion way for removal
INUS - BUSCH
Ian and Judy,
toggle quoted messageShow quoted text
beewax seems to fit good for natural wood, thanks for that. All the best. Dieter Fal-lera Sharki #135 Von meinem iPhone gesendet
Am 16.10.2019 um 19:01 schrieb ianjenkins1946 <ianjudyjenkins@hotmail.com> <ianjudyjenkins@hotmail.com>:
|
|
|
|
Re: Onan MDKD 6.5kW genset exhaust elbow
Orion Martin
Hi Karen,
Is it possible to temporarily remove it and measure for dimensions?
|
|
|
|
Re: mizzen traveller
Thank you Mark
Paul
|
|
|
|
Re: Onan MDKD 6.5kW genset exhaust elbow
Mark McGovern
Karen,
I just looked up the price for a replacement for this part. US$2,269 is absolutely insane! I could make them out of 316 Stainless Steel for way less than that. I have to remove mine this winter for cleaning so I may just design a replacement and put a few extra on the shelf. Unfortunately, that will too late to help you guys out. -- Mark McGovern SM #440 Cara Deale, MD USA
|
|
|
|
Re: mizzen traveller
Mark McGovern
Paul, --
|
|
|
|
Re: mizzen traveller
I have looked at the set up Harmonie did, and might make similar, but I can,t see what make the track is for ordering control block.
Currently I use a preventer to control the shape and position of the sail, but improvement is needed Paul
|
|
|
|
Re: New Genoa sail for Amel 54 and SM
talked with incidnce sail again, and no problem they will do the foam luff. On my current sail I had no foam luff, but had a rope sewed in and that improved the shape a lot on the genoa when furled. The sailmaker who sewed in the rope said that if one rope was not enough, one could sew in a shorter rope parallel to the first one. Understand that this is old school but it definitely made a big difference.
Paul SY Kerpa SM 259, Lagos
|
|
|
|
Re: SM2K: Replacing a CLIMMA 9EH AC unit in the Salon
#replacement
We installed a Webasto 10,000 BTU unit. Note that most other manufacturers do not outwardly state their units are dual cycle (so they don't have to replace parts under warranty). Webasto does. They also have a wide support network and are less expensive. Ian & Margaret S/V Loca Lola II SM153 US East Coast
On Oct 17, 2019, at 5:05 AM, eric freedman <kimberlite@...> wrote:
|
|
|
