Date   

Re: Identify this part

amelforme
 

That’s the bolt and washer for the spare fixed pitch prop.

 

Joel     

 

       JOEL F. POTTER-CRUISING YACHT SPECIALIST~L.L.C.

                                           THE  EXPERIENCED AMEL GUY

UNSURPASSED AMEL MARKETING EXPERIENCE AND PRODUCT KNOWLEDGE

                                   Office 954-462-5869  Cell 954-812-2485

 

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of CW Bill Rouse
Sent: Saturday, March 14, 2020 9:57 AM
To: main@AmelYachtOwners.groups.io Notification <main@amelyachtowners.groups.io>
Subject: Re: [AmelYachtOwners] Identify this part

 

Here is a photo of the part to ID:

image.png

Image removed by sender.

Image removed by sender.

CW Bill Rouse Amel Owners Yacht School

Address: 720 Winnie, Galveston Island, Texas 77550 

Image removed by sender.Image removed by sender.Image removed by sender.

 

View My Training Calendar

Image removed by sender.

Image removed by sender. cloudHQ

Powered by
cloudHQ

 

 

On Sat, Mar 14, 2020 at 8:54 AM CW Bill Rouse via Groups.Io <brouse=gmail.com@groups.io> wrote:

All,

 

I have seen this part before, but I cannot remember what it is used for. Any advice is appreciated. The threaded hole is about 18 or 19mm. The OD of the part is about 50mm.

 

 

Image removed by sender.

Image removed by sender.

CW Bill Rouse Amel Owners Yacht School

Address: 720 Winnie, Galveston Island, Texas 77550 

Image removed by sender.Image removed by sender.Image removed by sender.

 

View My Training Calendar

Image removed by sender.

Image removed by sender. cloudHQ

Powered by
cloudHQ


WiFi Extenders - best 2019-2020

marty hameline
 

Hola Amelians,

I am looking for current reviews on the best wifi extenders.......

I searched the user site files and couldn't find anything new or relevant.   Objective is to grab shore wifi while at anchor and work remotely with video calls, email etc... I know the quality depend on the source..

Appreciate your experience as I am looking to buy a system now.

Cheers,

Martin hAMELine
SV VoileOvent
Maramu # 129


Re: Floor board locks

Paul Osterberg
 

I hope I do not get the same experience as you. But will probably install floor lockers to be on the safe side
Paul SY Kerpa SM#259


Re: Identify this part

 

Here is a photo of the part to ID:
image.png
CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar
cloudHQPowered by
cloudHQ


On Sat, Mar 14, 2020 at 8:54 AM CW Bill Rouse via Groups.Io <brouse=gmail.com@groups.io> wrote:
All,

I have seen this part before, but I cannot remember what it is used for. Any advice is appreciated. The threaded hole is about 18 or 19mm. The OD of the part is about 50mm.


CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar
cloudHQPowered by
cloudHQ


Re: Imperial seals in the Caribbean - onan water pump

 

Caraibe Marine in Martinique is an Onan dealer. 




CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar
cloudHQPowered by
cloudHQ


On Sat, Mar 14, 2020 at 7:15 AM Patrick McAneny via Groups.Io <sailw32=aol.com@groups.io> wrote:
David, While in Le Marin last winter I had a new raw water pump shipped from an Onan dealer in Fla.,it took about a week to be shipped. I am sure you could have seals shipped as well. 
Good Luck ,
Pat
SM#123


-----Original Message-----
From: David Cummane via Groups.Io <davidcummane=mac.com@groups.io>
To: main <main@AmelYachtOwners.groups.io>
Sent: Sat, Mar 14, 2020 7:27 am
Subject: [AmelYachtOwners] Imperial seals in the Caribbean - onan water pump

I have a leak on the genset raw water pump and am in Guadeloupe.  Yesterday I managed to source the pump shaft from the onan dealer in pointe a pitre.  However am having more difficulty sourcing the seals as there are only metric sizes available here.

I have tried using the new shaft with the old seals but as expected not a very successful outcome.

Will hopefully be heading towards Antigua, BVI, Bahamas and onto the US, virus restrictions permitting.  Would be great to get hold
of the correct seals before I reach the US though.

Any suggestions welcome.

David
Ker Marie
SM#101


Identify this part

 

All,

I have seen this part before, but I cannot remember what it is used for. Any advice is appreciated. The threaded hole is about 18 or 19mm. The OD of the part is about 50mm.


CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar
cloudHQPowered by
cloudHQ


Re: Imperial seals in the Caribbean - onan water pump

Patrick McAneny
 

David, While in Le Marin last winter I had a new raw water pump shipped from an Onan dealer in Fla.,it took about a week to be shipped. I am sure you could have seals shipped as well. 
Good Luck ,
Pat
SM#123


-----Original Message-----
From: David Cummane via Groups.Io <davidcummane@...>
To: main <main@AmelYachtOwners.groups.io>
Sent: Sat, Mar 14, 2020 7:27 am
Subject: [AmelYachtOwners] Imperial seals in the Caribbean - onan water pump

I have a leak on the genset raw water pump and am in Guadeloupe.  Yesterday I managed to source the pump shaft from the onan dealer in pointe a pitre.  However am having more difficulty sourcing the seals as there are only metric sizes available here.

I have tried using the new shaft with the old seals but as expected not a very successful outcome.

Will hopefully be heading towards Antigua, BVI, Bahamas and onto the US, virus restrictions permitting.  Would be great to get hold
of the correct seals before I reach the US though.

Any suggestions welcome.

David
Ker Marie
SM#101


Imperial seals in the Caribbean - onan water pump

David Cummane
 

I have a leak on the genset raw water pump and am in Guadeloupe.  Yesterday I managed to source the pump shaft from the onan dealer in pointe a pitre.  However am having more difficulty sourcing the seals as there are only metric sizes available here.

I have tried using the new shaft with the old seals but as expected not a very successful outcome.

Will hopefully be heading towards Antigua, BVI, Bahamas and onto the US, virus restrictions permitting.  Would be great to get hold
of the correct seals before I reach the US though.

Any suggestions welcome.

David
Ker Marie
SM#101


Re: accidentally removed from forum - putting link to spare parts

 

Your first posting is automatically moderated. 

Best,

CW Bill Rouse 
Amel Owners Yacht School
+1 832-380-4970 | brouse@...
720 Winnie, Galveston Island, Texas 77550 
www.AmelOwnersYachtSchool.com 
Yacht School Calendar: www.preparetocastoff.blogspot.com/p/calendar.html


   

On Fri, Mar 13, 2020, 11:33 AM Alexandre Uster <uster@...> wrote:

I accidentally clicked on spam blocking myself from receiving email from the forum… and Bill just help me to get back in, now using a different email address, which is:  uster@...

I don’t think I can read any reply from my post on the old email address, so if could reply again using this one.

 

Just updated the share parts for sale, adding Diesel Fuel Stick, Safety Bars:

I will also regularly update/add my page:

http://nikimat.com/parts_for_sale/

 

Sincerely, Alexandre


accidentally removed from forum - putting link to spare parts

Alexandre Uster <uster@...>
 

I accidentally clicked on spam blocking myself from receiving email from the forum… and Bill just help me to get back in, now using a different email address, which is:  uster@...

I don’t think I can read any reply from my post on the old email address, so if could reply again using this one.

 

Just updated the share parts for sale, adding Diesel Fuel Stick, Safety Bars:

I will also regularly update/add my page:

http://nikimat.com/parts_for_sale/

 

Sincerely, Alexandre


Re: Cockpit Loud speakers

Gary Wells
 

I replaced ours with Fusion units as well.  While the current speaker covers are square I think you will find a round hole behind them.  
I did have to drill new screw holes, and the old ones are filled but still slightly visible.

They sound great :) 


Re: New Head which one

 

The old quiet flush base sometimes failed in 10-20 years. It was redesigned. There is not enough time to tell if it is better, but I believe it is. 

Best,

CW Bill Rouse 
Amel Owners Yacht School
+1 832-380-4970 | brouse@...
720 Winnie, Galveston Island, Texas 77550 
www.AmelOwnersYachtSchool.com 
Yacht School Calendar: www.preparetocastoff.blogspot.com/p/calendar.html


   

On Thu, Mar 12, 2020, 12:56 PM Paul Osterberg <osterberg.paul.l@...> wrote:
The base on our old head aft is broken beyond repair. Thought I replace it with a Jabsco quiet flush, however searching the forum I see that there have been issues with the weak base. Anyone have a better suggestion to substitute it with 
Paul on SY Kerpa SM#259 Lagos Portugal sykerpa.com


Re: Floor board locks

eric freedman
 

Amel installed 2 on each floorboard. On my last boat I also installed 2 locks.

We have been knocked down about 12 times on Kimberlite 9 in a hurricane 1 microburst a 2 rogue waves.

For about 6 times the floorboards were not locked and the still stayed closed and nothing flew around- no drawers or cabinets opened.

Fair Winds

Eric

Amel Super Maramu #376

 

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of Paul Osterberg
Sent: Friday, March 13, 2020 9:12 AM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] Floor board locks

 

Eric Thank you
do you have two or one lock on each floor board?
Paul


Re: Floor board locks

Paul Osterberg
 

Eric Thank you
do you have two or one lock on each floor board?
Paul


Re: SSB Ground Plane - Advice?

Alan Leslie
 

Hi Duane,
Lack of a ground connection can cause crazy SWR readings.
Lack of a ground connection will make it impossible to transmit.
Lack of a ground connection doesn't affect your ability to receive.
Faulty coax cable between the radio and the tuner can cause high SWR readings.

You need to check that there is a low impedance path from the antenna tuner ground to the sintered bronze plates on the rudder skeg.

The best ground connection between all components is flat copper strip, but wire will work as long as it is multistranded and low impedance.(we have wire from the radio to the tuner to the ground plate connection in the lazarette, and it works fine).

Cheers
Alan
Elyse SM437
  
 


Re: Floor board locks

eric freedman
 

I had Amel install lock downs when Kimberlite was built.

However they cannot be used on a preexisting hatch.

However, I used these on my last boat –they are terrific.

Check this out.

Fair Winds

Eric

Amel Super Maramu #376

 

https://store.pyiinc.com/collections/floor-anchors

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of Paul Osterberg
Sent: Thursday, March 12, 2020 2:08 PM
To: main@AmelYachtOwners.groups.io
Subject: [AmelYachtOwners] Floor board locks

 

I'm thinking of putting locks on the large hinged floorboards as we store a lot of heavy items there (wine bottles and other necessities), In the unlikely event of being knocked down looks would make such event easier to cope with. The floor boards are rather large should one go for two on each or would one each be sufficient? I know some of you out there have them, do you have one or two on each floor board. any pictures on types of locks would be highly apreciated.
Paul on SY Kerpa SM#259 Lagos, Portugal sykerpa.com


Re: Cockpit Loud spekers

Arnold Mente
 

Hi Paul,

please check these: 

FUSION SM-F65CB

Arnold
SY Zephyr
SM 203


Am 12.03.2020 um 19:12 schrieb Paul Osterberg <osterberg.paul.l@...>:

Our loud speakers in the cockpit needs to be replaced.I have problem finding suitable speakers, as most of them are round. I guess someone out there have changed them and can give som advice where to find square ones or suitable round ones, that not cost a fortune.
Paul on SY Kerpa SM#259 Lagos, Portugal <IMG_20200312_125003.jpg><IMG_20200312_125008.jpg>

Arnold Mente

Urbaniweg 12
7000 Eisenstadt 

Tel: +43 660 6699019

arnold.mente@...




--
Arnold
SY Zephyr SM203


Re: How to clean the hull from diesel soot

eric freedman
 

Duane,

There a few coats of hard wax aft of the exhaust pipes.

I use Roll-off for any soot.

However- we motored for 10 days last spring with almost no soot.

I believe the solution for me was Howes fuel treatment.

Fair Winds

Eric

Amel Super Maramu #376

 

 

From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io] On Behalf Of Duane Siegfri via Groups.Io
Sent: Thursday, March 12, 2020 9:21 AM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] How to clean the hull from diesel soot

 

Eric,
what product do you use?  I don't see one in your post.

Duane
Wanderer #477


Re: Harmonie's new windows

Alejandro Paquin
 

Great job!! We did the same 6 years ago, tricky job though. We used 3M Marine Silicone instead. It needs to be a flexible material. So far so good. Had to replace all of the screws and and all the plywood interior panels as well. One of the more difficult projects in renovating vintage Amels. We used a dark grey, it looks almost black from the outside but from the inside you get plenty of light and visibility. W used a locally produced acrylic manufacturer who used the old pieces as molds to give us the cut replicas of the originals. We also changed the hatches as well.
--
Alex Paquin
S/V " SIMPATICO"
Amel Maramu
Hull #94, 1981


Re: Hardstand storage Greece

John Clanton <jclanton@...>
 

You should be good until Friday night.