On Apr 25, 2020, at 15:38, Arno Luijten <arno.luijten@...> wrote:

Hi Barry,

I would not worry too much about the size difference. Do make sure you are looking at the medium size profile series as opposed to the Ocean series and the low-profile series.

Word of advice; also order new hinge pins as you are likely forced to break the existing ones out when removing the hatch. Lewmar did not put anti-seize paste on the hinge-pins (stainless pin in alloy hole). Also the small grub-screws holding the two halves of the frame together may prove a pig to remove. When replacing the lens most definitely also replace the seal that holds the lens, you will get leaks otherwise.
I had all the hatches done last year, but did not require new lenses. Only the seals were replace because of leakage.

Regards,

Arno Luijten
SV Luna,
A54-121

On Apr 25, 2020, at 15:21, Chuck_Kim_Joy <clacey9@...> wrote:



Hi Berry,

I had my hatch glass done here in Le Marin. They take the hatch and bring it back. 

Caraïbe Menuiserie

I have not done the windshield yet but Alban says 

Incidences Sails is the place for that. Sorry for the cut and paste. 

Chuck 

Joy SM 388

 

On Sat, Apr 25, 2020 at 1:51 PM Barry Connor via groups.io <connor_barry=yahoo.com@groups.io> wrote:

<image1.jpeg>

Hi Paul,

<image0.jpeg>

 No, not UV damage. The boat yard workers in Monastir, Tunisia sprayed/spilt a liquid all over my topside. The deck polished out OK but all the acrylic hatches, port lights and widescreens need replacement. When we bought in 2015 all windows were perfect no signs of any marks or UV affects, now we have streaks and blotches everywhere.

I don’t know if any Amel 54 owners have had to replace the acrylics before. If anyone has any experience with replacement of the acrylics I would really appreciate any advise. This is becoming a challenge. A have had some traders wanting to cut out and replace, don’t know what quality acrylic I might get. I only want the genuine supply from manufacturers.

Would appreciate any advise that anyone has.

Best

Barry and Penny Connor

“SV Lady Penelope II”

Amel 54.  #17

Sainte Anne anchorage Martinique 

On Apr 25, 2020, at 12:17, Paul Dowd and Sharon Brown <paul.dowd@...> wrote:



Barry,

 

I’m curious as to why they need replacing – UV damage? Should I be concerned about mine?

 

Cheers,

Paul

S/Y Ya Fohi - Amel 54 #98 - Grenada

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Barry Connor via groups.io
Sent: 25 April 2020 15:44
To: main@AmelYachtOwners.groups.io
Subject: [AmelYachtOwners] Lewmar acrylic lens replacement on Amel 54

 

I need to replace all my Lewmar arcylic lens on the 7 Lewmar hatches. I have measured the outside and they tally with Lewmar specs for the size 50,54,60,and 70.
I measure the actual lens size and the size does not match the Lewmar specification for the actual lens.
Example:
Lewmar size 50: My overall outer measurements, 448x578mm. Same as Lewmar spec. 
Lewmar size 50 lens: Lewmar specification measurement for lens is 377x507mm. My measurement of Lens inside the seal 387x517.

Can anyone put me straight on this?
These acrylic lenses do not seem difficult to install after looking at the Lewmar video, don't want to order the wrong size.

Thanks

Barry and Penny Connor
"SV Lady Penelope II"
Amel 54.  #17
Sainte Anne anchorage Martinique

--
Cheers
Paul
Ya Fohi - Amel 54 #98

On Sun, 26 Apr 2020 at 10:37, Craig & Katherine Briggs SN 68 Sangaris Tropic Isle Harbor, FL via groups.io

<sangaris@...> wrote:

Bill,
Thanks for the Zoom get together. Great to see the AMEL Owner's gang!
Craig

On 25Apr, 2020, at 21:59, Laurie McCall <laurie.mcreid@...> wrote:

is  there  a meeting id?

thanks,

Laurie