|
Re: Anchor chain counter
amelforme
Hello Paul. The Amel 54 uses a vertical capstan Lewmar windlass with an integral chain counter as part of the system. It is entirely different than the Pouchon supplied counter on the Lofrans horizontal capstan windlass on the Super Maramu 53
All the best, Joel
JOEL F. POTTER ~ CRUISING YACHT SPECIALIST, L.L.C. The Experienced AMEL Guy UNSURPASSED AMEL MARKETING EXPERIENCE AND PRODUCT KNOWLEDGE Office 954-462-5869 Cell 954-812-2485
From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Paul Dowd and Sharon Brown
Sent: Monday, August 31, 2020 8:26 AM To: main@AmelYachtOwners.groups.io Subject: Re: [AmelYachtOwners] Anchor chain counter
Many thanks again Rink for this useful advice. I will follow it when I return to the boat.
Cheers, Paul S/Y Ya Fohi - Amel 54 #98 - Grenada
From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Rink De Haan
Hi Paul,
I have an Amel53 with a Lofrans Tigres windlass. Don’t know if you have the same. On the Tigres the sensor is in the black tube housing attached to the Tigres (by Amel). You need to remove the cover (2 bolts) and then you can unscrew the tube housing and remove the old sensor. The new sensor will come with a long cable which you need to shorten. Disconnect the old ones and re-connect the new ones. Align the new sensor the same way as the old one was placed. I fixed the new sensor with some sika and two pieces of plastic form a tie wrap.
Again, this is on my 2001 SM2K with a Lofrans Tigres (which I btw upgraded with a new motor which is 1500W).
Best regards, Rink
Van: "main@AmelYachtOwners.groups.io" <main@AmelYachtOwners.groups.io> namens Paul Dowd and Sharon Brown <paul.dowd@...>
Rink,
Many thanks. Whereabouts exactly is the unit located? Do I need to open the windlass?
Cheers, Paul S/Y Ya Fohi - Amel 54 #98 - Grenada
From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Rink De Haan
Hi Paul,
There are different numbers showing up at the Forum. You can find the documents at the suppliers website https://www.ifm.com/gb/en/product/IB5072 I ordered the IB5072 (EUR 79) and installed it this summer. Installation is very simple and it worked straight away. Fixed the sensor with 2 tie wrap pieces inserted.
Best regards,
Rink SY Razor’s Edge SM2k #330 Greece
Van: "main@AmelYachtOwners.groups.io" <main@AmelYachtOwners.groups.io> namens Paul Dowd and Sharon Brown <paul.dowd@...>
Hi all,
I believe I need to get a replacement anchor chain counter sensor. I’m away from the boat and cannot find anything on the Lewmar online store so I would much appreciate if someone could advise the part number. IFM5072 turned up in this forum but I can’t find anything online in English relating to it.
Cheers, Paul S/Y Ya Fohi - Amel 54 #98 - Grenada
|
|||||||||||
|
|
|||||||||||
|
Re: Anchor chain counter
Paul Dowd and Sharon Brown
Many thanks again Rink for this useful advice. I will follow it when I return to the boat.
Cheers, Paul S/Y Ya Fohi - Amel 54 #98 - Grenada
From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Rink De Haan
Sent: 31 August 2020 14:06 To: main@AmelYachtOwners.groups.io Subject: Re: [AmelYachtOwners] Anchor chain counter
Hi Paul,
I have an Amel53 with a Lofrans Tigres windlass. Don’t know if you have the same. On the Tigres the sensor is in the black tube housing attached to the Tigres (by Amel). You need to remove the cover (2 bolts) and then you can unscrew the tube housing and remove the old sensor. The new sensor will come with a long cable which you need to shorten. Disconnect the old ones and re-connect the new ones. Align the new sensor the same way as the old one was placed. I fixed the new sensor with some sika and two pieces of plastic form a tie wrap.
Again, this is on my 2001 SM2K with a Lofrans Tigres (which I btw upgraded with a new motor which is 1500W).
Best regards, Rink
Van: "main@AmelYachtOwners.groups.io" <main@AmelYachtOwners.groups.io> namens Paul Dowd and Sharon Brown <paul.dowd@...>
Rink,
Many thanks. Whereabouts exactly is the unit located? Do I need to open the windlass?
Cheers, Paul S/Y Ya Fohi - Amel 54 #98 - Grenada
From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Rink De Haan
Hi Paul,
There are different numbers showing up at the Forum. You can find the documents at the suppliers website https://www.ifm.com/gb/en/product/IB5072 I ordered the IB5072 (EUR 79) and installed it this summer. Installation is very simple and it worked straight away. Fixed the sensor with 2 tie wrap pieces inserted.
Best regards,
Rink SY Razor’s Edge SM2k #330 Greece
Van: "main@AmelYachtOwners.groups.io" <main@AmelYachtOwners.groups.io> namens Paul Dowd and Sharon Brown <paul.dowd@...>
Hi all,
I believe I need to get a replacement anchor chain counter sensor. I’m away from the boat and cannot find anything on the Lewmar online store so I would much appreciate if someone could advise the part number. IFM5072 turned up in this forum but I can’t find anything online in English relating to it.
Cheers, Paul S/Y Ya Fohi - Amel 54 #98 - Grenada
-- Cheers Paul Ya Fohi - Amel 54 #98
|
|||||||||||
|
|
|||||||||||
|
Re: New rub rail inserts
Patrick McAneny
I spoke to Joel ,and Amel installed hard plastic inserts on a half dozen or so boats. They do not have the rounded gutter ,more square . I cannot guarantee that the new insert will fit those few boats , it may very well ,but you would need to determine that. There is a question that there may be a horizontal lip protruding out from the inboard side of the boat under the plastic insert, which boats with the normal insert do not have. I now have nine orders , orders will be taken til 9/5 ,the cut off date ,when the orders will be placed . This will probably be the last chance to participate in a group purchase of a new insert, so if you live in North America, this is a chance to get a new white insert and save approximately $1,600. on shipping and duty.
If outside of N.A. ,contact Maude at Amel , for an insert ,her price is as cheap as I can produce it for here. Thank You,
Pat
SM Shenanigans
-----Original Message-----
From: Craig Briggs via groups.io <sangaris@...> To: main@AmelYachtOwners.groups.io Sent: Sun, Aug 30, 2020 6:28 pm Subject: Re: [AmelYachtOwners] New rub rail inserts Hi again, Dave. When you say you've had a couple of cracks in your rub rail inserts, it sounds like you've got a rigid plastic insert. Eric mentioned that's what he had too. These new inserts are EPDM rubber - not a rigiid plastic and they, by definition, don't crack - they flex.
Nobody has pinned it down definitively, but it seems Amel may have had the rigid plastic at some time. I believe the underlying structure is the same, though, and these new rubber inserts will fit perfectly. Just want you to realize they are flexible rubber, not a hard plastic, Cheers, Craig --- SN68 Sangaris, Tropic Isle Harbor, FL
|
|||||||||||
|
|
|||||||||||
|
Re: Anchor chain counter
Rink De Haan
Hi Paul,
I have an Amel53 with a Lofrans Tigres windlass. Don’t know if you have the same. On the Tigres the sensor is in the black tube housing attached to the Tigres (by Amel). You need to remove the cover (2 bolts) and then you can unscrew the tube housing and remove the old sensor. The new sensor will come with a long cable which you need to shorten. Disconnect the old ones and re-connect the new ones. Align the new sensor the same way as the old one was placed. I fixed the new sensor with some sika and two pieces of plastic form a tie wrap.
Again, this is on my 2001 SM2K with a Lofrans Tigres (which I btw upgraded with a new motor which is 1500W).
Best regards, Rink
Van: "main@AmelYachtOwners.groups.io" <main@AmelYachtOwners.groups.io> namens Paul Dowd and Sharon Brown <paul.dowd@...>
Rink,
Many thanks. Whereabouts exactly is the unit located? Do I need to open the windlass?
Cheers, Paul S/Y Ya Fohi - Amel 54 #98 - Grenada
From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io>
On Behalf Of Rink De Haan
Sent: 31 August 2020 13:36 To: main@AmelYachtOwners.groups.io Subject: Re: [AmelYachtOwners] Anchor chain counter
Hi Paul,
There are different numbers showing up at the Forum. You can find the documents at the suppliers website https://www.ifm.com/gb/en/product/IB5072 I ordered the IB5072 (EUR 79) and installed it this summer. Installation is very simple and it worked straight away. Fixed the sensor with 2 tie wrap pieces inserted.
Best regards,
Rink SY Razor’s Edge SM2k #330 Greece
Van: "main@AmelYachtOwners.groups.io" <main@AmelYachtOwners.groups.io>
namens Paul Dowd and Sharon Brown <paul.dowd@...>
Hi all,
I believe I need to get a replacement anchor chain counter sensor. I’m away from the boat and cannot find anything on the Lewmar online store so I would much appreciate if someone could advise the part number. IFM5072 turned up in this forum but I can’t find anything online in English relating to it.
Cheers, Paul S/Y Ya Fohi - Amel 54 #98 - Grenada
|
|||||||||||
|
|
|||||||||||
|
Re: Anchor chain counter
Paul Dowd and Sharon Brown
Rink,
Many thanks. Whereabouts exactly is the unit located? Do I need to open the windlass?
Cheers, Paul S/Y Ya Fohi - Amel 54 #98 - Grenada
From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Rink De Haan
Sent: 31 August 2020 13:36 To: main@AmelYachtOwners.groups.io Subject: Re: [AmelYachtOwners] Anchor chain counter
Hi Paul,
There are different numbers showing up at the Forum. You can find the documents at the suppliers website https://www.ifm.com/gb/en/product/IB5072 I ordered the IB5072 (EUR 79) and installed it this summer. Installation is very simple and it worked straight away. Fixed the sensor with 2 tie wrap pieces inserted.
Best regards,
Rink SY Razor’s Edge SM2k #330 Greece
Van: "main@AmelYachtOwners.groups.io" <main@AmelYachtOwners.groups.io> namens Paul Dowd and Sharon Brown <paul.dowd@...>
Hi all,
I believe I need to get a replacement anchor chain counter sensor. I’m away from the boat and cannot find anything on the Lewmar online store so I would much appreciate if someone could advise the part number. IFM5072 turned up in this forum but I can’t find anything online in English relating to it.
Cheers, Paul S/Y Ya Fohi - Amel 54 #98 - Grenada
-- Cheers Paul Ya Fohi - Amel 54 #98
|
|||||||||||
|
|
|||||||||||
|
Re: Anchor chain counter
Paul Dowd and Sharon Brown
Alan,
Many thanks. Are you able to confirm that the same one is used on the 54?
Cheers, Paul S/Y Ya Fohi - Amel 54 #98 - Grenada
From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Alan Leslie
Sent: 31 August 2020 11:56 To: main@AmelYachtOwners.groups.io Subject: Re: [AmelYachtOwners] Anchor chain counter
Paul, -- Cheers Paul Ya Fohi - Amel 54 #98
|
|||||||||||
|
|
|||||||||||
|
Re: Anchor chain counter
Rink De Haan
Hi Paul,
There are different numbers showing up at the Forum. You can find the documents at the suppliers website https://www.ifm.com/gb/en/product/IB5072 I ordered the IB5072 (EUR 79) and installed it this summer. Installation is very simple and it worked straight away. Fixed the sensor with 2 tie wrap pieces inserted.
Best regards,
Rink SY Razor’s Edge SM2k #330 Greece
Van: "main@AmelYachtOwners.groups.io" <main@AmelYachtOwners.groups.io> namens Paul Dowd and Sharon Brown <paul.dowd@...>
Hi all,
I believe I need to get a replacement anchor chain counter sensor. I’m away from the boat and cannot find anything on the Lewmar online store so I would much appreciate if someone could advise the part number. IFM5072 turned up in this forum but I can’t find anything online in English relating to it.
Cheers, Paul S/Y Ya Fohi - Amel 54 #98 - Grenada
|
|||||||||||
|
|
|||||||||||
|
Re: DC DC starter battery charger on Amel 55 fuse sizes
Billy Newport
I emailed Stephane and got the following response back.
"Good Morning Billy, I am Ioera from POCHON PRO design office.
On AMEL55, the standard inverter DC/DC is a MAGIC 24/12-20 (MasterVolt). When this device works in chargins mode (3-step mode) the output charge current is 16A.
This explains the fuse value of 15A.
I stay at your disposal for any further information.
Best regards.
Ioera.
Bureau d’Etude POCHON PRO"
|
|||||||||||
|
|
|||||||||||
|
Re: Anchor chain counter
Paul,
Here's some info that may help you Cheers Alan Elyse Sm437
|
|||||||||||
|
|
|||||||||||
|
Re: Bilge pump
Danny and Yvonne SIMMS
Hi Alex, the pump is not self priming so if the foot valve on the bottom of the suction pipe is not holding the water in column in the pipe the pump will act but not suck. If you grasp the suction pipe in the middle (having first detached any securing system) and pull it back and forth vigorously with he pump running you are likely to prime the pump and away you go. The movement up and down of the suction pipe acts like a pump forcing water up until the pump takes over. Obviously a replacement foot valve would be a longer term solution. Another thing that can cause the same effect as a leaking foot valve is a small leak in the suction pipe. Be sure all joints are well made and the pipe is in good order. Regards Danny SM 299 Ocean Pearl Mangonui New Zealand
On 31 August 2020 at 19:51 Alexis LETELLIER <alexis.letellier@...> wrote:
|
|||||||||||
|
|
|||||||||||
|
Anchor chain counter
Paul Dowd and Sharon Brown
Hi all,
I believe I need to get a replacement anchor chain counter sensor. I’m away from the boat and cannot find anything on the Lewmar online store so I would much appreciate if someone could advise the part number. IFM5072 turned up in this forum but I can’t find anything online in English relating to it.
Cheers, Paul S/Y Ya Fohi - Amel 54 #98 - Grenada
-- Cheers Paul Ya Fohi - Amel 54 #98
|
|||||||||||
|
|
|||||||||||
|
Re: Bilge pump
Paul Dowd and Sharon Brown
Alex,
I have had this happen twice to the auto bilge pump when the hose drained whilst in the yard for an extended stay. The resolution was to allow the hose to fill with water from the fridges by temporarily closing the seacock. Once the pump was primed as such it worked fine. I do keep a spare rubber flap for the pump but have not needed to replace it yet.
Cheers, Paul S/Y Ya Fohi - Amel 54 #98 - Grenada
From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Alexis LETELLIER
Sent: 31 August 2020 09:52 To: main@AmelYachtOwners.groups.io Subject: [AmelYachtOwners] Bilge pump
Hi all, -- Cheers Paul Ya Fohi - Amel 54 #98
|
|||||||||||
|
|
|||||||||||
|
Re: Galley refrigerator not cooling
Paul Dowd and Sharon Brown
No that I think about it I have seen another refrigeration repair shop close to where Amel is.
Cheers, Paul S/Y Ya Fohi - Amel 54 #98 - Grenada
From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Barry Connor via groups.io
Sent: 30 August 2020 15:09 To: main@amelyachtowners.groups.io Subject: Re: [AmelYachtOwners] Galley refrigerator not cooling
Thank you Paul. I will ask Alban at Amel Le Marin to recommend someone. Best Barry
-- Cheers Paul Ya Fohi - Amel 54 #98
|
|||||||||||
|
|
|||||||||||
|
Bilge pump
Alexis LETELLIER
Hi all,
a bilge pump question on SM8 as our pump has been showing signs of weakness twice in one month. It keeps on pumping but nothing comes out. I've dismounted it but nothing looked wrong or obstructed. Then it worked again for 3 weeks, then failed again. I suspect an air leak, as the pump gasket looks a bit worn. Unfortunately, the safety manual pump doesn't work either. So, if I have to change this pump, my questions are : - do you recommend any upgrade or any model? (this one is a 25lt/min // A:4,5 // Rpm:25 // W90 // Serv. S2 // IP22 // I.CI.B// from 2012) - I've seen an interesting set-up in a Contest Yacht with 2 bilge pumps (in a row?), so that you still have an electric one on if the first one has problems. Have you install this kind of set-up? - about the manual safety pump, any idea what can be the problem? (i think it has quite never been used, and it may be dry and with an air leak as as well?) Thank you ! Regards, Alex
|
|||||||||||
|
|
|||||||||||
|
Re: DC DC starter battery charger on Amel 55 fuse sizes
Ken Powers SV Aquarius
Was the Orion charger an upgrade? Check the battery. The start battery should not be discharged just because the start-battery-charger goes down. Unless there is a short somewhere.
1A. Replace the fuse with a 15amp fuse. 1. Check there is no short or leakage in the start circuit for the Genset. 2. Check there is no short or leakage in the start circuit for the Engine. 3. Try a different battery for the start circuit. 4. Check to see if there is a short in the key switch for the engine start. 5. If, nothing fixed the problem, there is probably something wrong within the Orion Charger. I don't believe that the start battery should be supplying current to anything with the engine off and the genset off. Even if your charger went dead for 10 engine starts, your battery should be able to handle it. Just my thoughts.. Hope you find the problem. Ken on Aquarius SM2K #262
|
|||||||||||
|
|
|||||||||||
|
Re: DC DC starter battery charger on Amel 55 fuse sizes
John Clanton
Joerg’s advice is the first thing I thought of when reading the original post.
The fuse size is not the problem. As in all things Amel, there is logic in why that particular fuse is 15 amps, even though it is not obvious to the rest of us. Once resolved, please post the underlying problem as well as the logic that does not seem obvious. Fair Winds, John SV Devereux A55, No.65 Disclaimer The information contained in this communication from the sender is confidential. It is intended solely for use by the recipient and others authorized to receive it. If the reader of this message is not the intended recipient, you are hereby notified that any review, retransmission, dissemination, distribution, copying or other use of, or taking of any action in reliance upon this information is strictly prohibited.
|
|||||||||||
|
|
|||||||||||
|
Re: SM2 Roller Reefer Guide Rods
David, don't forget, "before David."
Hi Dave,
|
|||||||||||
|
|
|||||||||||
|
Re: New rub rail inserts
Hi again, Dave. When you say you've had a couple of cracks in your rub rail inserts, it sounds like you've got a rigid plastic insert. Eric mentioned that's what he had too. These new inserts are EPDM rubber - not a rigiid plastic and they, by definition, don't crack - they flex.
Nobody has pinned it down definitively, but it seems Amel may have had the rigid plastic at some time. I believe the underlying structure is the same, though, and these new rubber inserts will fit perfectly. Just want you to realize they are flexible rubber, not a hard plastic, Cheers, Craig --- SN68 Sangaris, Tropic Isle Harbor, FL
|
|||||||||||
|
|
|||||||||||
|
Re: SM2 Roller Reefer Guide Rods
Hi Dave,
It sure quacks like the balooner halyard not being removed. Although you've not had the balooner up yourself, my guess is it was done by a prior owner and those were bent when you got the boat. How long have you had her? Craig -- SN68 Sangaris, Tropic Isle Harbor, FL
|
|||||||||||
|
|
|||||||||||
|
Re: New rub rail inserts
OK, Pat, I’m in as well. I had a couple of cracks in my rubrail inserts previously, but the trip through the Erie Canal and 36 locks has been a little rough on the rubrail. And I accumulated several more cracks in the inserts. I see your email address in another post so I’ll be in touch regarding details. And thanks for putting this together!
Regards, Dave -- Dave Kurtz SM2 #380 S/V Celtic Cross Detroit, Michigan
|
|||||||||||
|
|
