Date   

Re: Yanmar 4JH4T valve adjustment

Eric Freedman
 

Kevin,

Do you have an 8 or 16 valve engine?

Fair Winds,

Eric

 

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Kevin Schmit
Sent: Tuesday, June 29, 2021 10:24 AM
To: main@AmelYachtOwners.groups.io
Subject: [AmelYachtOwners] Yanmar 4JH4T valve adjustment

 

Can anyone confirm if the Group Valve Adjustment sequencing on the Yanmar 4JH4TX1 is the same as the Yanmar 4JH3 engine?
--
Kevin & Kristen Schmit
KIANA
SM #362


Re: Improved 24v alternator pulleys and turbo heat shield

Scott SV Tengah
 

Nick,

Can you provide more info about the heat shield? My turbo heat shield is destroyed, too.

I presume that since the D3's Garrett turbo is used on cars, you can find a non-marine one for less than the 500 euros that Volvo Penta wants for theirs!

--
Scott 
2007 A54 #69
SV Tengah
http://www.svtengah.com


Question for 50 & 55 owners about the bow thruster

 

Can you tell me if your bow truster is the SE170 or the SE250. I am fairly sure that you have the SE170, but need to verify.

Same question for the Amel 50.

Bill
CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar


Re: Yanmar 100 hp starter relay

Derick Gates SM2K #400 Brava
 

Bill, thanks for the quick response. If the key is turned, the appropriate red lights go on in the paMel , but when the key is further turned to the start position, the negative solenoid does engage, but there is no cranking of the engine. If the mechanic shorts out the two posts on the starter relay while the key is in the start position, the engine does crank and immediately runs. So we suspect the starter relay has failed, or fails at high temperatures (after running the engine for some time). I will see if I can source it here in Montenegro. 


Derick
SM2K #400 Brava 


Re: Yanmar 100 hp starter relay

 

Derick,

What are the symptoms? If you are experiencing NO CRANK, it can be something the mechanic will not be familiar with. Included in the troubleshooting should be the Valeo Negative Solenoid, the Starter Relay, the 2 diodes that go to the positive lug on the Valeo Solenoid, the Solenoid on top of the Starter Motor, and the Starter Motor.

Generally, the start cycle works like this: 
When you turn on the key the warning lights turn ON and the buzzer sounds. 
When you turn the switch to start, the Starter Relay energizes the Valeo Negative Solenoid connecting the battery negative to the block and it energizes the Yanmar starter motor solenoid, extending the gear and turning the starter motor.  I suggest cleaning every connection and brushing on CorrosionX.

The parts involved in this are:
Yanmar key switch 127412-91250
Starter Relay I believe is part number 119575-77510
Valeo Solenoid is part number Valeo part number VA053457
Yanmar Starter Magnetic Starter Switch (Solenoid) 124298-77020
Yanmar Starter 129698-77010
Two diodes unknown (someone will know, please help here)

More detail here: 2 pages from my Amel Book: 


I hope that this helps...I think that there is better than a 50% chance it is a loose and/or dirty connection that needs cleaning and CorrosionX.


image.png
CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar


On Tue, Jun 29, 2021 at 12:05 PM Derick Gates SM2K #400 Brava <derickgates@...> wrote:

 What is the part number for the starter relay on the 100 hp Yanmar? I am having a hard time starting my engine when it is hot and the mechanic suspects this relay is problematic and I am looking to replace it  

Derick Gates
SM2K #400
currently in Bar, Montenegro 


Re: Yanmar 4JH4T valve adjustment

 

Here is a page from my book and it is what I do on a 4JH3, which I believe you can do on the 4JH4
Bill
CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar


On Tue, Jun 29, 2021 at 10:24 AM Kevin Schmit <kevschmit64@...> wrote:
Can anyone confirm if the Group Valve Adjustment sequencing on the Yanmar 4JH4TX1 is the same as the Yanmar 4JH3 engine?
--
Kevin & Kristen Schmit
KIANA
SM #362


Yanmar 100 hp starter relay

Derick Gates SM2K #400 Brava
 

 What is the part number for the starter relay on the 100 hp Yanmar? I am having a hard time starting my engine when it is hot and the mechanic suspects this relay is problematic and I am looking to replace it  

Derick Gates
SM2K #400
currently in Bar, Montenegro 


Yanmar 4JH4T valve adjustment

Kevin Schmit
 

Can anyone confirm if the Group Valve Adjustment sequencing on the Yanmar 4JH4TX1 is the same as the Yanmar 4JH3 engine?
--
Kevin & Kristen Schmit
KIANA
SM #362


Re: Miele Microwave on A55 not working

 

It is likely something serious, but I had the same issue with my Amel installed microwave.

I opened it up getting the non-tamper screws out and discovered that when some of the internal spade connections were touched it came to life. I disconnected all of the connections, brushed-on some CorrosionX, reassembled it, and it lasted for years until we replaced it with one with more features.

I know this sounds like a commercial for CorrosionX, but it's a true life example of micro-corrosion and solutions while living aboard with salt air, and CorrosionX.

Best,

CW Bill Rouse 
Amel Owners Yacht School
+1 832-380-4970 | brouse@...
720 Winnie, Galveston Island, Texas 77550 
www.AmelOwnersYachtSchool.com 
Yacht School Calendar: www.preparetocastoff.blogspot.com/p/calendar.html


   


On Tue, Jun 29, 2021, 2:05 AM Joerg Esdorn via groups.io <jhe1313=yahoo.com@groups.io> wrote:

Our microwave went black yesterday in the middle of warming up some frozen food.  It was quite warm inside and now doesn’t show any sign of life.  Any suggestions?  


joerg esdorn
A55 #53 Kincsem
on passage to Cadiz


Re: Miele Microwave on A55 not working

Brent Cameron
 

I can’t help with the exact model but I’ve fixed a few microwaves in my day and it’s usually one of two causes, both easy for DYI although you do need to be very careful to ensure it isn’t plugged in and you discharge the large capacitor before poking around in there as it can carry a lethal charge.  Most microwaves have a large internal fuse (15A usually) that can trip (often if someone accidentally put metal inside). The other is that the magnetrons fail. They are easy to replace as well (usually just a few wires). The other thing to check would be the door switch but it doesn’t sound like that as it failed mid cooking. Good luck!

Brent

On Jun 29, 2021, 3:05 AM -0400, Joerg Esdorn via groups.io <jhe1313@...>, wrote:

Our microwave went black yesterday in the middle of warming up some frozen food. It was quite warm inside and now doesn’t show any sign of life. Any suggestions?


joerg esdorn
A55 #53 Kincsem
on passage to Cadiz


--
Brent Cameron

Future Amel Owner & Amel Owner Registry Moderator

Oro-Medonte, Ontario, Canada


Re: #attackedbywhales #newboat WE SOLD THE BOAT! Now what??? Sailing Ocean F... #attackedbywhales #newboat

Danny and Yvonne SIMMS
 

Hi  Colin

I still love my SM.Ocean Pearl but if I suggested to Yvonne  a 50 she would say yes yes yes. But for me the systems on the SM, the ketch rig, the ease of sail control and the supreme sailing controlability in any conditions and the sea kindliness all combine to hold me.

Danny

SM 299

Ocean Pearl

On 29 June 2021 at 19:48 Colin - ex SV Island Pearl <colin.d.streeter@...> wrote:

Ah-ha! That is a very interesting comment by Amel, and probably pretty well researched too amongst existing Amel owners too who no longer intend to circumnavigate.

We too have found ourselves drawn towards some of the awesome features of the Amel 50 for a potential next boat. After enjoying a wonderfully safe, comfortable, and easy circumnavigation in a SuperMaramu 2000 despite some really tough conditions, we now found ourselves thinking more of doing local sailing mainly in the future, plus potentially the Med and then the normal "milk run" easier North Atlantic to the Caribbean, and then Pacific and home to Australia route next time which could be great in the 50. 

If we were doing the Indian Ocean again, we would be straight back in an SM2000!

I do hope that Amel sees that video and does something about strengthening those rudders, and also considers the prop shaft support issue too. That said, we had a huge and fast whale come threateningly down on us like a torpedo from the rear just before rounding the north tip of Madagascar, and I think nothing but a very strong old steel boat could realistically deal with that! Fortunately, in our case, it was a false alarm and the whale dived down and headed out to our stbd side not hitting us.

Colin Streeter
Currently boatless and enjoying land touring home in Australia
ex Island Pearl II

On Tue, Jun 29, 2021 at 2:32 PM Danny and Yvonne SIMMS < simms@...> wrote:

Hi all,

Yvonne and I visited Amel at La Rochelle when they were fitting out the first 50. It was in the water at the dock and we were given a walk through. I raised with them that it appeared to have moved from the all on ocean crossing circumnavigator build of previous Amels. I asked if their target market had shifted.

They told me that the target for the 50 was existing Amel owners who had done their major passages and wanted a new boat with all the great features of Amel but more suited for inshore sailing.

Who am I to argue with that. There are hundreds of us out there.

Kind Regards

Danny

SM 299

Ocean Pearl

On 29 June 2021 at 15:44 eric freedman < kimberlite@...> wrote:

Is that the New Amel 50?

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Arno Luijten
Sent: Monday, June 28, 2021 5:11 PM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] #attackedbywhales #newboat WE SOLD THE BOAT! Now what??? Sailing Ocean F...

 

[Edited Message Follows]

For those not seeing the link:

https://youtube.com/watch?v=haVHkHks9v4&feature=share

————————
Hmm, balance rudders on an Amel, not sure about that…

It seems Amel changed the construction of the rudder(s) quite drastically. But they are not alone, Hallberg Rassy is doing the very same thing. The added beam at the stern of the boat makes this inevitable.
From my personal point of view. I think everything under the waterline must be as close to bomb proof as you can realistically make it. So these modern hull shapes with twin rudders are posing a devils dilemma in my opinion.
I found it also a bit uncomfortable looking at the size of the P-bracket that guides the propellor-shaft. I would have preferred a upside-down V-shape for that thing. This setup seems very fragile as well and begging for bent propellor-shafts

I’m aware that these wide bottoms do give you nice sail performance but I’m not so sure if this new design is not conflicting with the prime directive of what Amel stands for.

I guess time will tell…

Cheers,

Arno Luijten,
SV Luna,
A54-121

 



 


 

 

 



--
Colin Streeter
0411 016 445


Re: #attackedbywhales #newboat WE SOLD THE BOAT! Now what??? Sailing Ocean F... #attackedbywhales #newboat

Colin - ex SV Island Pearl
 

Ah-ha! That is a very interesting comment by Amel, and probably pretty well researched too amongst existing Amel owners too who no longer intend to circumnavigate.

We too have found ourselves drawn towards some of the awesome features of the Amel 50 for a potential next boat. After enjoying a wonderfully safe, comfortable, and easy circumnavigation in a SuperMaramu 2000 despite some really tough conditions, we now found ourselves thinking more of doing local sailing mainly in the future, plus potentially the Med and then the normal "milk run" easier North Atlantic to the Caribbean, and then Pacific and home to Australia route next time which could be great in the 50. 

If we were doing the Indian Ocean again, we would be straight back in an SM2000!

I do hope that Amel sees that video and does something about strengthening those rudders, and also considers the prop shaft support issue too. That said, we had a huge and fast whale come threateningly down on us like a torpedo from the rear just before rounding the north tip of Madagascar, and I think nothing but a very strong old steel boat could realistically deal with that! Fortunately, in our case, it was a false alarm and the whale dived down and headed out to our stbd side not hitting us.

Colin Streeter
Currently boatless and enjoying land touring home in Australia
ex Island Pearl II

On Tue, Jun 29, 2021 at 2:32 PM Danny and Yvonne SIMMS <simms@...> wrote:

Hi all,

Yvonne and I visited Amel at La Rochelle when they were fitting out the first 50. It was in the water at the dock and we were given a walk through. I raised with them that it appeared to have moved from the all on ocean crossing circumnavigator build of previous Amels. I asked if their target market had shifted.

They told me that the target for the 50 was existing Amel owners who had done their major passages and wanted a new boat with all the great features of Amel but more suited for inshore sailing.

Who am I to argue with that. There are hundreds of us out there.

Kind Regards

Danny

SM 299

Ocean Pearl

On 29 June 2021 at 15:44 eric freedman <kimberlite@...> wrote:

Is that the New Amel 50?

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Arno Luijten
Sent: Monday, June 28, 2021 5:11 PM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] #attackedbywhales #newboat WE SOLD THE BOAT! Now what??? Sailing Ocean F...

 

[Edited Message Follows]

For those not seeing the link:

https://youtube.com/watch?v=haVHkHks9v4&feature=share

————————
Hmm, balance rudders on an Amel, not sure about that…

It seems Amel changed the construction of the rudder(s) quite drastically. But they are not alone, Hallberg Rassy is doing the very same thing. The added beam at the stern of the boat makes this inevitable.
From my personal point of view. I think everything under the waterline must be as close to bomb proof as you can realistically make it. So these modern hull shapes with twin rudders are posing a devils dilemma in my opinion.
I found it also a bit uncomfortable looking at the size of the P-bracket that guides the propellor-shaft. I would have preferred a upside-down V-shape for that thing. This setup seems very fragile as well and begging for bent propellor-shafts

I’m aware that these wide bottoms do give you nice sail performance but I’m not so sure if this new design is not conflicting with the prime directive of what Amel stands for.

I guess time will tell…

Cheers,

Arno Luijten,
SV Luna,
A54-121

 



 


 



--
Colin Streeter
0411 016 445


Miele Microwave on A55 not working

Joerg Esdorn
 

Our microwave went black yesterday in the middle of warming up some frozen food.  It was quite warm inside and now doesn’t show any sign of life.  Any suggestions?  


joerg esdorn
A55 #53 Kincsem
on passage to Cadiz


Re: #attackedbywhales #newboat WE SOLD THE BOAT! Now what??? Sailing Ocean F... #attackedbywhales #newboat

Danny and Yvonne SIMMS
 

Hi all,

Yvonne and I visited Amel at La Rochelle when they were fitting out the first 50. It was in the water at the dock and we were given a walk through. I raised with them that it appeared to have moved from the all on ocean crossing circumnavigator build of previous Amels. I asked if their target market had shifted.

They told me that the target for the 50 was existing Amel owners who had done their major passages and wanted a new boat with all the great features of Amel but more suited for inshore sailing.

Who am I to argue with that. There are hundreds of us out there.

Kind Regards

Danny

SM 299

Ocean Pearl

On 29 June 2021 at 15:44 eric freedman <kimberlite@...> wrote:

Is that the New Amel 50?

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Arno Luijten
Sent: Monday, June 28, 2021 5:11 PM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] #attackedbywhales #newboat WE SOLD THE BOAT! Now what??? Sailing Ocean F...

 

[Edited Message Follows]

For those not seeing the link:

https://youtube.com/watch?v=haVHkHks9v4&feature=share

————————
Hmm, balance rudders on an Amel, not sure about that…

It seems Amel changed the construction of the rudder(s) quite drastically. But they are not alone, Hallberg Rassy is doing the very same thing. The added beam at the stern of the boat makes this inevitable.
From my personal point of view. I think everything under the waterline must be as close to bomb proof as you can realistically make it. So these modern hull shapes with twin rudders are posing a devils dilemma in my opinion.
I found it also a bit uncomfortable looking at the size of the P-bracket that guides the propellor-shaft. I would have preferred a upside-down V-shape for that thing. This setup seems very fragile as well and begging for bent propellor-shafts

I’m aware that these wide bottoms do give you nice sail performance but I’m not so sure if this new design is not conflicting with the prime directive of what Amel stands for.

I guess time will tell…

Cheers,

Arno Luijten,
SV Luna,
A54-121

 



 


 


Re: #attackedbywhales #newboat WE SOLD THE BOAT! Now what??? Sailing Ocean F... #attackedbywhales #newboat

Eric Freedman
 

Is that the New Amel 50?

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Arno Luijten
Sent: Monday, June 28, 2021 5:11 PM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] #attackedbywhales #newboat WE SOLD THE BOAT! Now what??? Sailing Ocean F...

 

[Edited Message Follows]

For those not seeing the link:

https://youtube.com/watch?v=haVHkHks9v4&feature=share

————————
Hmm, balance rudders on an Amel, not sure about that…

It seems Amel changed the construction of the rudder(s) quite drastically. But they are not alone, Hallberg Rassy is doing the very same thing. The added beam at the stern of the boat makes this inevitable.
From my personal point of view. I think everything under the waterline must be as close to bomb proof as you can realistically make it. So these modern hull shapes with twin rudders are posing a devils dilemma in my opinion.
I found it also a bit uncomfortable looking at the size of the P-bracket that guides the propellor-shaft. I would have preferred a upside-down V-shape for that thing. This setup seems very fragile as well and begging for bent propellor-shafts

I’m aware that these wide bottoms do give you nice sail performance but I’m not so sure if this new design is not conflicting with the prime directive of what Amel stands for.

I guess time will tell…

Cheers,

Arno Luijten,
SV Luna,
A54-121


Re: Windlass ans BT batteries

Mike Longcor (SV Trilogy)
 

Hello,

The Santorin may be different but the BT and windlass motors on our Super Maramu are 24V while engine start is 12V.

Is your set up like this or is everything 12V?

We have a 24V alternator (in addition to the 12V alternator) that provides charging to the service batteries while engine is running. Maybe this is your best option? The lithiums will have more capacity and do a better job of supplying the high power required for BT and windlass compared to a lead acid anyway - if that's what your start battery is.

Cheers,
Mike Longer
SV Trilogy SM23
New Zealand


On Thu, Jun 24, 2021, 1:54 AM Loïc TAUZIN <loictaz340@...> wrote:
I change my service batteries with lithium.
But the BT and the windlass are connected on these batteries.
I want to connect on the motor battery Park, but how can I do that ? 
Thanks

Loïc

Santorin sloop N°35.


Re: #attackedbywhales #newboat WE SOLD THE BOAT! Now what??? Sailing Ocean F... #attackedbywhales #newboat

Arno Luijten
 
Edited

For those not seeing the link:

https://youtube.com/watch?v=haVHkHks9v4&feature=share

————————
Hmm, balance rudders on an Amel, not sure about that…

It seems Amel changed the construction of the rudder(s) quite drastically. But they are not alone, Hallberg Rassy is doing the very same thing. The added beam at the stern of the boat makes this inevitable.
From my personal point of view. I think everything under the waterline must be as close to bomb proof as you can realistically make it. So these modern hull shapes with twin rudders are posing a devils dilemma in my opinion.
I found it also a bit uncomfortable looking at the size of the P-bracket that guides the propellor-shaft. I would have preferred a upside-down V-shape for that thing. This setup seems very fragile as well and begging for bent propellor-shafts

I’m aware that these wide bottoms do give you nice sail performance but I’m not so sure if this new design is not conflicting with the prime directive of what Amel stands for.

I guess time will tell…

Cheers,

Arno Luijten,
SV Luna,
A54-121


#attackedbywhales #newboat WE SOLD THE BOAT! Now what??? Sailing Ocean F... #attackedbywhales #newboat

Steven Nieman
 



Verstuurd vanaf mijn iPhone

Begin doorgestuurd bericht:

Van: Steven Nieman <stefnieman@...>

Onderwerp: #attackedbywhales #newboat WE SOLD THE BOAT! Now what??? Sailing Ocean F...

Vanaf 6.12 min. Amel rudders

https://youtube.com/watch?v=haVHkHks9v4&feature=share


Verstuurd vanaf mijn iPad


Re: 24VDC to 12VDC converters: 0V connections

Randall Walker
 

Thomas,
I found the switch it is like the one behind the DC panel in the galley. Really big switches that take up space I will be swapping these out for much smaller ones and labeling them for the next owner. Way to much time spent identifying wires.

Randall
A54#56
Grenada

On Mon, Jun 28, 2021 at 13:40 Randall Walker via groups.io <sailingalbedo=gmail.com@groups.io> wrote:
Thomas where is this wooden panel? You mention finding an on/ off switch.

Randall
A54#56
Grenada

On Mon, Jun 28, 2021 at 00:21 Sv Garulfo <svgarulfo@...> wrote:
Thanks Ruedi 

We also have an on/off switch for the permanent, but Amel relocated it behind the wooden panel on the starboard side of the chart table. Not sure why, it’s not easier/more difficult to access there...

Cheers

Thomas 
GARULFO 
A54-122
Tahiti 

On 27 Jun 2021, at 09:58, Rudolf Waldispuehl <Rudolf@...> wrote:

Hi Thomas

 

On WASABI we have the same setup, except that there is a separate “Permanent ON/OFF” Switch under the converter (see picture).

I suppose you have another ON/OFF configuration on the Permanent and therefore they bridged the +0 on input and output.

Probably GARULFO do not have a ON/OFF Switch for the Converter Input and therefore the bridge makes your converter permanent as permanent 😉

The other 2 converter are just switched on when you push the green “INSTRUMENTS” button at the chart table next to the window.

 

Best and fair winds

Ruedi,

WASABI , Amel-54 #55

 

Von: "main@AmelYachtOwners.groups.io" <main@AmelYachtOwners.groups.io> im Auftrag von Sv Garulfo <svgarulfo@...>
Antworten an: "main@AmelYachtOwners.groups.io" <main@AmelYachtOwners.groups.io>
Datum: Sonntag, 27. Juni 2021 um 01:44
An: "main@AmelYachtOwners.groups.io" <main@amelyachtowners.groups.io>
Betreff: [AmelYachtOwners] 24VDC to 12VDC converters: 0V connections

 

Hi all,

 

On GARULFO, and I suspect on other A54s and maybe SM, there are three 24VDC to 12VDC converters, marked “permanent”, “hydra/iscan v90” and “VHF icom”.

 

Of those, only the “permanent” one has the input +0V and the output +0V posts connected. 

 

Does anyone know why that is?

Why shouldn’t the other 2 be the same?

 

In one pic:

 

<image001.jpg>

 

 

Thanks

 

 

Best,

 

 

Thomas

GARULFO 

A54-122

Tahiti 

 

 

 

<IMG_0466[1].jpg>


Re: 24VDC to 12VDC converters: 0V connections

Randall Walker
 

Thomas where is this wooden panel? You mention finding an on/ off switch.

Randall
A54#56
Grenada

On Mon, Jun 28, 2021 at 00:21 Sv Garulfo <svgarulfo@...> wrote:
Thanks Ruedi 

We also have an on/off switch for the permanent, but Amel relocated it behind the wooden panel on the starboard side of the chart table. Not sure why, it’s not easier/more difficult to access there...

Cheers

Thomas 
GARULFO 
A54-122
Tahiti 

On 27 Jun 2021, at 09:58, Rudolf Waldispuehl <Rudolf@...> wrote:

Hi Thomas

 

On WASABI we have the same setup, except that there is a separate “Permanent ON/OFF” Switch under the converter (see picture).

I suppose you have another ON/OFF configuration on the Permanent and therefore they bridged the +0 on input and output.

Probably GARULFO do not have a ON/OFF Switch for the Converter Input and therefore the bridge makes your converter permanent as permanent 😉

The other 2 converter are just switched on when you push the green “INSTRUMENTS” button at the chart table next to the window.

 

Best and fair winds

Ruedi,

WASABI , Amel-54 #55

 

Von: "main@AmelYachtOwners.groups.io" <main@AmelYachtOwners.groups.io> im Auftrag von Sv Garulfo <svgarulfo@...>
Antworten an: "main@AmelYachtOwners.groups.io" <main@AmelYachtOwners.groups.io>
Datum: Sonntag, 27. Juni 2021 um 01:44
An: "main@AmelYachtOwners.groups.io" <main@amelyachtowners.groups.io>
Betreff: [AmelYachtOwners] 24VDC to 12VDC converters: 0V connections

 

Hi all,

 

On GARULFO, and I suspect on other A54s and maybe SM, there are three 24VDC to 12VDC converters, marked “permanent”, “hydra/iscan v90” and “VHF icom”.

 

Of those, only the “permanent” one has the input +0V and the output +0V posts connected. 

 

Does anyone know why that is?

Why shouldn’t the other 2 be the same?

 

In one pic:

 

<image001.jpg>

 

 

Thanks

 

 

Best,

 

 

Thomas

GARULFO 

A54-122

Tahiti 

 

 

 

<IMG_0466[1].jpg>

1981 - 2000 of 60662