Date   

Re: Change seacock on a sharki

INUS - BUSCH
 

Mark, Olivier, Gregory, Johannes, Bill and Gerhard,

thank you all for your contribution, very helpful. Finally it turned out to be an easy job: Remove the old one and put in a new one. The trick is to use an anaerobic sealant, before one has to clean the surfaces very carefully eg finally with acetone. Applying the sealant and let it cure overnight, than one can fix the tubes. But it only works for metal seacocks. This s the sealant that was used:

Fair winds
Dieter
Fal-lera Sharki #135, Sardenia



Am 01.07.2021 um 10:50 schrieb INUS - BUSCH <mail@...>:

Dear forum,

on my Sharki the seacock of the toilet-out by the time has become harder and harder to open, now it is stuck in the closed position.
From the foto it seems possible to remove the whole valve by unscrewing it from the GRP reinforced shaft. Is this the right way? And is it possible without destroying the shaft? It would be great if somebody who has undertaken this job can give me an advice how to change this seacock.

All the best
Dieter
SV Fal-lera, Sharki #135


Mainsail batten specs Amel 54

Roque
 

To all

I want to replace the mainsail battens.

I have checked previous forum threads and found three different dimensions, all for SM, and fiberglass made:  

                                20mm x 6 or 7 mm (#40407)
                                1 x  ¼  inch  (#30106),

                                1 ¼ x 3/16 inch (#5088)

Does any A54 owner happen to have the correct measures and maybe the material they are made of? Is it even or gets thinner towards the upper end?  I have the OEM Hydranet main sail.

 

Thank you

Roque

Attika A54 #117

Paraty- Brazil

 


Re: lip seal behind the prop of the bow thruster facing towards the water or toward the oil?

Bill Kinney
 

The side with the spring needs to be the oil side.

https://fetchinketch.net/boat-projects/lipseals/

 


lip seal behind the prop of the bow thruster facing towards the water or toward the oil?

Willem Kroes
 

Please giive me the answer. It came of facing the water. But oil was a bit milky.

Willem Kroes
SM2K # 351
Malta


Re: AC pump form Super Maramu

Jose Alegria
 

Eric

Model TM50

See bellow

Kindest regards




Jose Alegria
Amel55 #03-MERIT
+351918663037
Josealegr@...



No dia 12/07/2021, às 12:16, Ceriolim via groups.io <ceriolim@...> escreveu:

Hi Eric.
The manifacturer of the origial pomp is TF Marine  www.tfmarine.it  .  They produce the original pomp and they have spare parts for it.
Regards


Re: AC pump form Super Maramu

Ceriolim
 

Hi Eric.
The manifacturer of the origial pomp is TF Marine  www.tfmarine.it  .  They produce the original pomp and they have spare parts for it.
Regards


Re: D3 110i-A exhaust elbow

Ulrich Michael Dangelmeyer
 

Hi Nick,

don´t worry about the final last night in Holy Wembley….England is second winner. Be aware, it´s a play.

Just for your information: in Patmos there is a regular Volvo Penta dealer/ service located:
Patmos Marine, phone +30 224 703 1903, mail: kamitsisperos@.... ( info from Volvo dealer locator). May be this is more directly than Partheni boatyard.

fair winds, less Meltemi and enjoy fine sailing..

Best
Ulrich
S/Y „Soleil Bleu“ A54#088
<>
Am 12.07.2021 um 10:12 schrieb ngtnewington Newington via groups.io <ngtnewington@...>:

Hi Ulrich,
I have not yet ordered the part as we are on the move, but maybe the boatyard in Partheni will accept it. I need to ask them.
In Patmos we spent a night in Grikes and went up to the Chora for dinner. Now anchored two bays north of Scala, waiting out the Meltemi. The forcast predicts light winds for a few days from Saturday, maybe even a west wind. So we plan to make it up to Ouinoussa near Chios. From there the Meltemi tends to be a bit less violent but we probably go to Lesvos and then Skopelos and Sciathos. After that we will have any Meltemi behind us.
Nick
S/Y Amelia
AML54-019
Patmos



On 11 Jul 2021, at 16:42, Ulrich Michael Dangelmeyer <ulrich.dangelmeyer@...> wrote:

Hi Nick,

great! good luck! THX for your feedback if you made the bargain.

Where are you mooring in Patmos? in the southern bight Grikous, or in the northern bights?
Main port Skala is currently under construction, new pontoons? > notes for mariners.

Then next heading north, whats your plan? plenty of f***** meltemi? no fun.
How is heading westbound, mykonos milos santorini…more meltemi? I´m courious, learning from you.

Best wishes and have a good day. Just preparing my luggage for Leros on Tuesday.

Ulrich
S/Y „Soleil Bleu“ A54#088
<>

Am 11.07.2021 um 15:26 schrieb ngtnewington Newington via groups.io <ngtnewington@...>:

Hi Ulrich
370 euros inc vat is more like it. Brand new OEM part. 
I will continue looking but that is probably the best bet.
Thanks
Nick
S/Y Amelia
AML 54-019
Patmos
Waiting for the Meltemi to ease off before heading north.


On 11 Jul 2021, at 16:13, Ulrich Michael Dangelmeyer <ulrich.dangelmeyer@...> wrote:

hello Nick and Bill and all other Amelians, are interested in this parts….

genuine VP part number 38073053 is correct and confirmed.
OEM part costs in Germany incl. VAT is 370,00 Euros.
> Have a look on the website from Carl Baguhn in Hamburg, main VP distributor in GER.


Hope this helps. 
@ Nick: shipping from Hamburg to Greece…peanuts by DHL or FedEx.

Best and fair winds
S/Y „Soleil Bleu“ A54#088
Leros GR
<>

Am 11.07.2021 um 14:58 schrieb CW Bill Rouse <brouse@...>:

Nick,

<image.png>

CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
  
View My Training Calendar


On Sun, Jul 11, 2021 at 7:56 AM Bill Rouse <brouse@...> wrote:
Great...I was afraid that I was wrong.

I will email HDI about 3807305. You should also.

CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
  
View My Training Calendar


On Sun, Jul 11, 2021 at 7:32 AM ngtnewington Newington via groups.io <ngtnewington=aol.com@groups.io> wrote:
Hi Bill, the Volvo Penta part number
is 3807305 which is the unit labelled 6 below 
<image0.jpeg>


Best
Nick
S/Y Amelia
AML54-019 Greece

On 10 Jul 2021, at 15:55, CW Bill Rouse <brouse@...> wrote:


Nick,

HDI Marine Ltd www.hdimarine.net manufacturers exhaust elbows by casting in one piece using the stainless steel investment cast process. It should be a buy one-time item and is usually significantly cheaper than the OEM elbow. Many A[mel owners have purchased from HDI and HDI is a preferred vendor of Yacht School.

HDI has the following items:
Volvo TMD 22 OEM Part #3582512 HDI part #AD
Yanmar 75 & 100hp 4JH3 Part #129671-13552 HDI part #L3

Do you know the number of the D3-110 elbow? I think it is part #21192127.

<image.png>

Jeff Krause sent me his D3 elbow which I sent to HDI to duplicate.  I never heard back from HDI. Possibly this part is impossible for HDI to make. I will follow up today with Hailey Wilkerson, Director of Marketing, 971-255-9139, hailey@.... Anyone else needing this part may also want to write Hailey.

Bill
CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
  
View My Training Calendar


On Sat, Jul 10, 2021 at 5:56 AM ngtnewington Newington via groups.io <ngtnewington=aol.com@groups.io> wrote:
Since replacing the turbo heat shield I can now visually inspect the exhaust elbow.
To that end I am no longer in blissful ignorance.
As shown in the photo the weld is corroding. Hot exhaust gas meets cold sea water. I do not think failure is imminent but clearly Something needs to be done.
I believe it is stainless steel as it is not magnetic. Not sure of the grade.
I see various options:
1. Buy spare gasket or make one and remove the whole elbow and if still sound have the welds ground out and repaired
2. Buy a new one for about £500 
Ouch seems excessively expensive, typical Volvo rip off
3. Have a new one fabricated in stainless.

Does anyone know what grade of stainless is best? 
Has anyone been down this avenue? Know of a good fabricator?

Nick SY Amelia

AML 54 -019











Re: D3 110i-A exhaust elbow

ngtnewington Newington
 

Hi Ulrich,
I have not yet ordered the part as we are on the move, but maybe the boatyard in Partheni will accept it. I need to ask them.
In Patmos we spent a night in Grikes and went up to the Chora for dinner. Now anchored two bays north of Scala, waiting out the Meltemi. The forcast predicts light winds for a few days from Saturday, maybe even a west wind. So we plan to make it up to Ouinoussa near Chios. From there the Meltemi tends to be a bit less violent but we probably go to Lesvos and then Skopelos and Sciathos. After that we will have any Meltemi behind us.
Nick
S/Y Amelia
AML54-019
Patmos



On 11 Jul 2021, at 16:42, Ulrich Michael Dangelmeyer <ulrich.dangelmeyer@...> wrote:

Hi Nick,

great! good luck! THX for your feedback if you made the bargain.

Where are you mooring in Patmos? in the southern bight Grikous, or in the northern bights?
Main port Skala is currently under construction, new pontoons? > notes for mariners.

Then next heading north, whats your plan? plenty of f***** meltemi? no fun.
How is heading westbound, mykonos milos santorini…more meltemi? I´m courious, learning from you.

Best wishes and have a good day. Just preparing my luggage for Leros on Tuesday.

Ulrich
S/Y „Soleil Bleu“ A54#088
<>

Am 11.07.2021 um 15:26 schrieb ngtnewington Newington via groups.io <ngtnewington@...>:

Hi Ulrich
370 euros inc vat is more like it. Brand new OEM part. 
I will continue looking but that is probably the best bet.
Thanks
Nick
S/Y Amelia
AML 54-019
Patmos
Waiting for the Meltemi to ease off before heading north.


On 11 Jul 2021, at 16:13, Ulrich Michael Dangelmeyer <ulrich.dangelmeyer@...> wrote:

hello Nick and Bill and all other Amelians, are interested in this parts….

genuine VP part number 38073053 is correct and confirmed.
OEM part costs in Germany incl. VAT is 370,00 Euros.
> Have a look on the website from Carl Baguhn in Hamburg, main VP distributor in GER.


Hope this helps. 
@ Nick: shipping from Hamburg to Greece…peanuts by DHL or FedEx.

Best and fair winds
S/Y „Soleil Bleu“ A54#088
Leros GR
<>

Am 11.07.2021 um 14:58 schrieb CW Bill Rouse <brouse@...>:

Nick,

<image.png>

CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
  
View My Training Calendar


On Sun, Jul 11, 2021 at 7:56 AM Bill Rouse <brouse@...> wrote:
Great...I was afraid that I was wrong.

I will email HDI about 3807305. You should also.

CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
  
View My Training Calendar


On Sun, Jul 11, 2021 at 7:32 AM ngtnewington Newington via groups.io <ngtnewington=aol.com@groups.io> wrote:
Hi Bill, the Volvo Penta part number
is 3807305 which is the unit labelled 6 below 
<image0.jpeg>


Best
Nick
S/Y Amelia
AML54-019 Greece

On 10 Jul 2021, at 15:55, CW Bill Rouse <brouse@...> wrote:


Nick,

HDI Marine Ltd www.hdimarine.net manufacturers exhaust elbows by casting in one piece using the stainless steel investment cast process. It should be a buy one-time item and is usually significantly cheaper than the OEM elbow. Many A[mel owners have purchased from HDI and HDI is a preferred vendor of Yacht School.

HDI has the following items:
Volvo TMD 22 OEM Part #3582512 HDI part #AD
Yanmar 75 & 100hp 4JH3 Part #129671-13552 HDI part #L3

Do you know the number of the D3-110 elbow? I think it is part #21192127.

<image.png>

Jeff Krause sent me his D3 elbow which I sent to HDI to duplicate.  I never heard back from HDI. Possibly this part is impossible for HDI to make. I will follow up today with Hailey Wilkerson, Director of Marketing, 971-255-9139, hailey@.... Anyone else needing this part may also want to write Hailey.

Bill
CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
  
View My Training Calendar


On Sat, Jul 10, 2021 at 5:56 AM ngtnewington Newington via groups.io <ngtnewington=aol.com@groups.io> wrote:
Since replacing the turbo heat shield I can now visually inspect the exhaust elbow.
To that end I am no longer in blissful ignorance.
As shown in the photo the weld is corroding. Hot exhaust gas meets cold sea water. I do not think failure is imminent but clearly Something needs to be done.
I believe it is stainless steel as it is not magnetic. Not sure of the grade.
I see various options:
1. Buy spare gasket or make one and remove the whole elbow and if still sound have the welds ground out and repaired
2. Buy a new one for about £500 
Ouch seems excessively expensive, typical Volvo rip off
3. Have a new one fabricated in stainless.

Does anyone know what grade of stainless is best? 
Has anyone been down this avenue? Know of a good fabricator?

Nick SY Amelia

AML 54 -019










Re: AC pump form Super Maramu

Eric Freedman
 

Thank you, Jose,

What model was the pump that you ordered?

Fair Winds

Eric

Kimberlite Amel Super Maramu #376

 

 

From: main@AmelYachtOwners.groups.io On Behalf Of Jose Alegria
Sent: Sunday, July 11, 2021 1:34 AM
To: main@amelyachtowners.groups.io
Subject: Re: [AmelYachtOwners] AC pump form Super Maramu

 

Eric

About bilge pump Amel dont have anymore.

you can find a new one at:

 

-- 
TF MARINE SRL
Lucca – Italy
Tel & Fax: +39 0584 338238
website: www.tfmarine.it 
email: 

Last 1 1/2 months to arrive

 

Good winds

 

 

Jose Alegria

Amel55 #03-MERIT

+351918663037

 

 



No dia 11/07/2021, às 08:00, eric freedman <kimberlite@...> escreveu:



 

Our Clapeda AC pump finally bit the dust. Some time ago it was suggested that the March AC-5C-MD 230 volt was a good substitute.

I do have that one on board. However, it has open windings, it has a lower output than the Calpeda and is not as robust.

I will install it temporarily.

Are there any other substitutes that are a little friendlier to salt water and are a better pump than the March.

I did find a Calpeda model BCM22/1/A-R. It will work but it is really overkill for this system.

Any other suggestions?

 

Does anyone know if Amel still stocks the original AMFA bilge pump? I am now working on my rebuilt spare, and I would like to have a spare or some other good bilge pump.

The AMFA pump is excellent pump and I even have found pieces of cable ties in it.

Any ideas or suggestions?

 

Fair Winds,

Eric

SM 376 Kimberlite


Re: AC pump form Super Maramu

Mark & Debbie Mueller
 

Recently replaced the Calapeda with the Iwaki MD70RT-220 50/60 Hz, magnetic drive pump, 1” ID hose inlet x 1” NPT M outlet.  It has an internal cooling circuit that keeps the motor cool and provides plenty of flow to the A/C units.  I re-drilled two holes in the original base plate and replaced the rubber vibration isolaters.  It has a slightly smaller foot print, draws less power, and no electrolysis problems.  This pump is also used by other marine A/C suppliers.
--
Mark Mueller
Brass Ring  A54


Re: D3 110i-A exhaust elbow

Ulrich Michael Dangelmeyer
 

Hi Nick,

great! good luck! THX for your feedback if you made the bargain.

Where are you mooring in Patmos? in the southern bight Grikous, or in the northern bights?
Main port Skala is currently under construction, new pontoons? > notes for mariners.

Then next heading north, whats your plan? plenty of f***** meltemi? no fun.
How is heading westbound, mykonos milos santorini…more meltemi? I´m courious, learning from you.

Best wishes and have a good day. Just preparing my luggage for Leros on Tuesday.

Ulrich
S/Y „Soleil Bleu“ A54#088
<>

Am 11.07.2021 um 15:26 schrieb ngtnewington Newington via groups.io <ngtnewington@...>:

Hi Ulrich
370 euros inc vat is more like it. Brand new OEM part. 
I will continue looking but that is probably the best bet.
Thanks
Nick
S/Y Amelia
AML 54-019
Patmos
Waiting for the Meltemi to ease off before heading north.


On 11 Jul 2021, at 16:13, Ulrich Michael Dangelmeyer <ulrich.dangelmeyer@...> wrote:

hello Nick and Bill and all other Amelians, are interested in this parts….

genuine VP part number 38073053 is correct and confirmed.
OEM part costs in Germany incl. VAT is 370,00 Euros.
> Have a look on the website from Carl Baguhn in Hamburg, main VP distributor in GER.


Hope this helps. 
@ Nick: shipping from Hamburg to Greece…peanuts by DHL or FedEx.

Best and fair winds
S/Y „Soleil Bleu“ A54#088
Leros GR
<>

Am 11.07.2021 um 14:58 schrieb CW Bill Rouse <brouse@...>:

Nick,

<image.png>

CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
  
View My Training Calendar


On Sun, Jul 11, 2021 at 7:56 AM Bill Rouse <brouse@...> wrote:
Great...I was afraid that I was wrong.

I will email HDI about 3807305. You should also.

CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
  
View My Training Calendar


On Sun, Jul 11, 2021 at 7:32 AM ngtnewington Newington via groups.io <ngtnewington=aol.com@groups.io> wrote:
Hi Bill, the Volvo Penta part number
is 3807305 which is the unit labelled 6 below 
<image0.jpeg>


Best
Nick
S/Y Amelia
AML54-019 Greece

On 10 Jul 2021, at 15:55, CW Bill Rouse <brouse@...> wrote:


Nick,

HDI Marine Ltd www.hdimarine.net manufacturers exhaust elbows by casting in one piece using the stainless steel investment cast process. It should be a buy one-time item and is usually significantly cheaper than the OEM elbow. Many A[mel owners have purchased from HDI and HDI is a preferred vendor of Yacht School.

HDI has the following items:
Volvo TMD 22 OEM Part #3582512 HDI part #AD
Yanmar 75 & 100hp 4JH3 Part #129671-13552 HDI part #L3

Do you know the number of the D3-110 elbow? I think it is part #21192127.

<image.png>

Jeff Krause sent me his D3 elbow which I sent to HDI to duplicate.  I never heard back from HDI. Possibly this part is impossible for HDI to make. I will follow up today with Hailey Wilkerson, Director of Marketing, 971-255-9139, hailey@.... Anyone else needing this part may also want to write Hailey.

Bill
CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
  
View My Training Calendar


On Sat, Jul 10, 2021 at 5:56 AM ngtnewington Newington via groups.io <ngtnewington=aol.com@groups.io> wrote:
Since replacing the turbo heat shield I can now visually inspect the exhaust elbow.
To that end I am no longer in blissful ignorance.
As shown in the photo the weld is corroding. Hot exhaust gas meets cold sea water. I do not think failure is imminent but clearly Something needs to be done.
I believe it is stainless steel as it is not magnetic. Not sure of the grade.
I see various options:
1. Buy spare gasket or make one and remove the whole elbow and if still sound have the welds ground out and repaired
2. Buy a new one for about £500 
Ouch seems excessively expensive, typical Volvo rip off
3. Have a new one fabricated in stainless.

Does anyone know what grade of stainless is best? 
Has anyone been down this avenue? Know of a good fabricator?

Nick SY Amelia

AML 54 -019










Re: D3 110i-A exhaust elbow

ngtnewington Newington
 

Hi Ulrich
370 euros inc vat is more like it. Brand new OEM part. 
I will continue looking but that is probably the best bet.
Thanks
Nick
S/Y Amelia
AML 54-019
Patmos
Waiting for the Meltemi to ease off before heading north.


On 11 Jul 2021, at 16:13, Ulrich Michael Dangelmeyer <ulrich.dangelmeyer@...> wrote:

hello Nick and Bill and all other Amelians, are interested in this parts….

genuine VP part number 38073053 is correct and confirmed.
OEM part costs in Germany incl. VAT is 370,00 Euros.
> Have a look on the website from Carl Baguhn in Hamburg, main VP distributor in GER.


Hope this helps. 
@ Nick: shipping from Hamburg to Greece…peanuts by DHL or FedEx.

Best and fair winds
S/Y „Soleil Bleu“ A54#088
Leros GR
<>

Am 11.07.2021 um 14:58 schrieb CW Bill Rouse <brouse@...>:

Nick,

<image.png>

CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
  
View My Training Calendar


On Sun, Jul 11, 2021 at 7:56 AM Bill Rouse <brouse@...> wrote:
Great...I was afraid that I was wrong.

I will email HDI about 3807305. You should also.

CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
  
View My Training Calendar


On Sun, Jul 11, 2021 at 7:32 AM ngtnewington Newington via groups.io <ngtnewington=aol.com@groups.io> wrote:
Hi Bill, the Volvo Penta part number
is 3807305 which is the unit labelled 6 below 
<image0.jpeg>


Best
Nick
S/Y Amelia
AML54-019 Greece

On 10 Jul 2021, at 15:55, CW Bill Rouse <brouse@...> wrote:


Nick,

HDI Marine Ltd www.hdimarine.net manufacturers exhaust elbows by casting in one piece using the stainless steel investment cast process. It should be a buy one-time item and is usually significantly cheaper than the OEM elbow. Many A[mel owners have purchased from HDI and HDI is a preferred vendor of Yacht School.

HDI has the following items:
Volvo TMD 22 OEM Part #3582512 HDI part #AD
Yanmar 75 & 100hp 4JH3 Part #129671-13552 HDI part #L3

Do you know the number of the D3-110 elbow? I think it is part #21192127.

<image.png>

Jeff Krause sent me his D3 elbow which I sent to HDI to duplicate.  I never heard back from HDI. Possibly this part is impossible for HDI to make. I will follow up today with Hailey Wilkerson, Director of Marketing, 971-255-9139, hailey@.... Anyone else needing this part may also want to write Hailey.

Bill
CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
  
View My Training Calendar


On Sat, Jul 10, 2021 at 5:56 AM ngtnewington Newington via groups.io <ngtnewington=aol.com@groups.io> wrote:
Since replacing the turbo heat shield I can now visually inspect the exhaust elbow.
To that end I am no longer in blissful ignorance.
As shown in the photo the weld is corroding. Hot exhaust gas meets cold sea water. I do not think failure is imminent but clearly Something needs to be done.
I believe it is stainless steel as it is not magnetic. Not sure of the grade.
I see various options:
1. Buy spare gasket or make one and remove the whole elbow and if still sound have the welds ground out and repaired
2. Buy a new one for about £500 
Ouch seems excessively expensive, typical Volvo rip off
3. Have a new one fabricated in stainless.

Does anyone know what grade of stainless is best? 
Has anyone been down this avenue? Know of a good fabricator?

Nick SY Amelia

AML 54 -019









Re: D3 110i-A exhaust elbow

Ulrich Michael Dangelmeyer
 

hello Nick and Bill and all other Amelians, are interested in this parts….

genuine VP part number 38073053 is correct and confirmed.
OEM part costs in Germany incl. VAT is 370,00 Euros.
> Have a look on the website from Carl Baguhn in Hamburg, main VP distributor in GER.


Hope this helps. 
@ Nick: shipping from Hamburg to Greece…peanuts by DHL or FedEx.

Best and fair winds
S/Y „Soleil Bleu“ A54#088
Leros GR
<>

Am 11.07.2021 um 14:58 schrieb CW Bill Rouse <brouse@...>:

Nick,


CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
  
View My Training Calendar


On Sun, Jul 11, 2021 at 7:56 AM Bill Rouse <brouse@...> wrote:
Great...I was afraid that I was wrong.

I will email HDI about 3807305. You should also.

CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
  
View My Training Calendar


On Sun, Jul 11, 2021 at 7:32 AM ngtnewington Newington via groups.io <ngtnewington=aol.com@groups.io> wrote:
Hi Bill, the Volvo Penta part number
is 3807305 which is the unit labelled 6 below 


Best
Nick
S/Y Amelia
AML54-019 Greece

On 10 Jul 2021, at 15:55, CW Bill Rouse <brouse@...> wrote:


Nick,

HDI Marine Ltd www.hdimarine.net manufacturers exhaust elbows by casting in one piece using the stainless steel investment cast process. It should be a buy one-time item and is usually significantly cheaper than the OEM elbow. Many A[mel owners have purchased from HDI and HDI is a preferred vendor of Yacht School.

HDI has the following items:
Volvo TMD 22 OEM Part #3582512 HDI part #AD
Yanmar 75 & 100hp 4JH3 Part #129671-13552 HDI part #L3

Do you know the number of the D3-110 elbow? I think it is part #21192127.

<image.png>

Jeff Krause sent me his D3 elbow which I sent to HDI to duplicate.  I never heard back from HDI. Possibly this part is impossible for HDI to make. I will follow up today with Hailey Wilkerson, Director of Marketing, 971-255-9139, hailey@.... Anyone else needing this part may also want to write Hailey.

Bill
CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
  
View My Training Calendar


On Sat, Jul 10, 2021 at 5:56 AM ngtnewington Newington via groups.io <ngtnewington=aol.com@groups.io> wrote:
Since replacing the turbo heat shield I can now visually inspect the exhaust elbow.
To that end I am no longer in blissful ignorance.
As shown in the photo the weld is corroding. Hot exhaust gas meets cold sea water. I do not think failure is imminent but clearly Something needs to be done.
I believe it is stainless steel as it is not magnetic. Not sure of the grade.
I see various options:
1. Buy spare gasket or make one and remove the whole elbow and if still sound have the welds ground out and repaired
2. Buy a new one for about £500 
Ouch seems excessively expensive, typical Volvo rip off
3. Have a new one fabricated in stainless.

Does anyone know what grade of stainless is best? 
Has anyone been down this avenue? Know of a good fabricator?

Nick SY Amelia

AML 54 -019









Re: D3 110i-A exhaust elbow

 

Nick,

image.png
CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar


On Sun, Jul 11, 2021 at 7:56 AM Bill Rouse <brouse@...> wrote:
Great...I was afraid that I was wrong.

I will email HDI about 3807305. You should also.

CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar


On Sun, Jul 11, 2021 at 7:32 AM ngtnewington Newington via groups.io <ngtnewington=aol.com@groups.io> wrote:
Hi Bill, the Volvo Penta part number
is 3807305 which is the unit labelled 6 below 


Best
Nick
S/Y Amelia
AML54-019 Greece

On 10 Jul 2021, at 15:55, CW Bill Rouse <brouse@...> wrote:


Nick,

HDI Marine Ltd www.hdimarine.net manufacturers exhaust elbows by casting in one piece using the stainless steel investment cast process. It should be a buy one-time item and is usually significantly cheaper than the OEM elbow. Many A[mel owners have purchased from HDI and HDI is a preferred vendor of Yacht School.

HDI has the following items:
Volvo TMD 22 OEM Part #3582512 HDI part #AD
Yanmar 75 & 100hp 4JH3 Part #129671-13552 HDI part #L3

Do you know the number of the D3-110 elbow? I think it is part #21192127.

<image.png>

Jeff Krause sent me his D3 elbow which I sent to HDI to duplicate.  I never heard back from HDI. Possibly this part is impossible for HDI to make. I will follow up today with Hailey Wilkerson, Director of Marketing, 971-255-9139, hailey@.... Anyone else needing this part may also want to write Hailey.

Bill
CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar


On Sat, Jul 10, 2021 at 5:56 AM ngtnewington Newington via groups.io <ngtnewington=aol.com@groups.io> wrote:
Since replacing the turbo heat shield I can now visually inspect the exhaust elbow.
To that end I am no longer in blissful ignorance.
As shown in the photo the weld is corroding. Hot exhaust gas meets cold sea water. I do not think failure is imminent but clearly Something needs to be done.
I believe it is stainless steel as it is not magnetic. Not sure of the grade.
I see various options:
1. Buy spare gasket or make one and remove the whole elbow and if still sound have the welds ground out and repaired
2. Buy a new one for about £500
Ouch seems excessively expensive, typical Volvo rip off
3. Have a new one fabricated in stainless.

Does anyone know what grade of stainless is best?
Has anyone been down this avenue? Know of a good fabricator?

Nick SY Amelia

AML 54 -019






Re: D3 110i-A exhaust elbow

 

Great...I was afraid that I was wrong.

I will email HDI about 3807305. You should also.

CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar


On Sun, Jul 11, 2021 at 7:32 AM ngtnewington Newington via groups.io <ngtnewington=aol.com@groups.io> wrote:
Hi Bill, the Volvo Penta part number
is 3807305 which is the unit labelled 6 below 


Best
Nick
S/Y Amelia
AML54-019 Greece

On 10 Jul 2021, at 15:55, CW Bill Rouse <brouse@...> wrote:


Nick,

HDI Marine Ltd www.hdimarine.net manufacturers exhaust elbows by casting in one piece using the stainless steel investment cast process. It should be a buy one-time item and is usually significantly cheaper than the OEM elbow. Many A[mel owners have purchased from HDI and HDI is a preferred vendor of Yacht School.

HDI has the following items:
Volvo TMD 22 OEM Part #3582512 HDI part #AD
Yanmar 75 & 100hp 4JH3 Part #129671-13552 HDI part #L3

Do you know the number of the D3-110 elbow? I think it is part #21192127.

<image.png>

Jeff Krause sent me his D3 elbow which I sent to HDI to duplicate.  I never heard back from HDI. Possibly this part is impossible for HDI to make. I will follow up today with Hailey Wilkerson, Director of Marketing, 971-255-9139, hailey@.... Anyone else needing this part may also want to write Hailey.

Bill
CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar


On Sat, Jul 10, 2021 at 5:56 AM ngtnewington Newington via groups.io <ngtnewington=aol.com@groups.io> wrote:
Since replacing the turbo heat shield I can now visually inspect the exhaust elbow.
To that end I am no longer in blissful ignorance.
As shown in the photo the weld is corroding. Hot exhaust gas meets cold sea water. I do not think failure is imminent but clearly Something needs to be done.
I believe it is stainless steel as it is not magnetic. Not sure of the grade.
I see various options:
1. Buy spare gasket or make one and remove the whole elbow and if still sound have the welds ground out and repaired
2. Buy a new one for about £500
Ouch seems excessively expensive, typical Volvo rip off
3. Have a new one fabricated in stainless.

Does anyone know what grade of stainless is best?
Has anyone been down this avenue? Know of a good fabricator?

Nick SY Amelia

AML 54 -019






Re: AC pump form Super Maramu

 

Eric,

I like this one:
Gianneschi 01CB22G302
95MM Impeller - 1841 GPH
1” In & Out
230VAC 50/60htz
image.png

The original A.M.F.A MARINA pump has been duplicated by TF Pumps/Gianneschi
image.png

Gianneschi  Pumps merged with TF Pumps. Both brands are available from their Florida Distributor

I negotiated a 15% discount from the distributor. Use my name with:

Contact:

Scott Blume <service@...>

266 SW 31st Street

Fort Lauderdale, FL 33315

+1-954-525-5151

www.inghamengineering.com



CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar


On Sun, Jul 11, 2021 at 12:34 AM Jose Alegria <Josealegr@...> wrote:
Eric
About bilge pump Amel dont have anymore.
you can find a new one at:

-- 
TF MARINE SRL
Lucca – Italy
Tel & Fax: +39 0584 338238
website: www.tfmarine.it 
email: 
Last 1 1/2 months to arrive

Good winds


Jose Alegria
Amel55 #03-MERIT
+351918663037



No dia 11/07/2021, às 08:00, eric freedman <kimberlite@...> escreveu:



 

Our Clapeda AC pump finally bit the dust. Some time ago it was suggested that the March AC-5C-MD 230 volt was a good substitute.

I do have that one on board. However, it has open windings, it has a lower output than the Calpeda and is not as robust.

I will install it temporarily.

Are there any other substitutes that are a little friendlier to salt water and are a better pump than the March.

I did find a Calpeda model BCM22/1/A-R. It will work but it is really overkill for this system.

Any other suggestions?

 

Does anyone know if Amel still stocks the original AMFA bilge pump? I am now working on my rebuilt spare, and I would like to have a spare or some other good bilge pump.

The AMFA pump is excellent pump and I even have found pieces of cable ties in it.

Any ideas or suggestions?

 

Fair Winds,

Eric

SM 376 Kimberlite


Re: D3 110i-A exhaust elbow

ngtnewington Newington
 

Hi Bill, the Volvo Penta part number
is 3807305 which is the unit labelled 6 below 


Best
Nick
S/Y Amelia
AML54-019 Greece

On 10 Jul 2021, at 15:55, CW Bill Rouse <brouse@...> wrote:


Nick,

HDI Marine Ltd www.hdimarine.net manufacturers exhaust elbows by casting in one piece using the stainless steel investment cast process. It should be a buy one-time item and is usually significantly cheaper than the OEM elbow. Many A[mel owners have purchased from HDI and HDI is a preferred vendor of Yacht School.

HDI has the following items:
Volvo TMD 22 OEM Part #3582512 HDI part #AD
Yanmar 75 & 100hp 4JH3 Part #129671-13552 HDI part #L3

Do you know the number of the D3-110 elbow? I think it is part #21192127.

<image.png>

Jeff Krause sent me his D3 elbow which I sent to HDI to duplicate.  I never heard back from HDI. Possibly this part is impossible for HDI to make. I will follow up today with Hailey Wilkerson, Director of Marketing, 971-255-9139, hailey@.... Anyone else needing this part may also want to write Hailey.

Bill
CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar


On Sat, Jul 10, 2021 at 5:56 AM ngtnewington Newington via groups.io <ngtnewington=aol.com@groups.io> wrote:
Since replacing the turbo heat shield I can now visually inspect the exhaust elbow.
To that end I am no longer in blissful ignorance.
As shown in the photo the weld is corroding. Hot exhaust gas meets cold sea water. I do not think failure is imminent but clearly Something needs to be done.
I believe it is stainless steel as it is not magnetic. Not sure of the grade.
I see various options:
1. Buy spare gasket or make one and remove the whole elbow and if still sound have the welds ground out and repaired
2. Buy a new one for about £500
Ouch seems excessively expensive, typical Volvo rip off
3. Have a new one fabricated in stainless.

Does anyone know what grade of stainless is best?
Has anyone been down this avenue? Know of a good fabricator?

Nick SY Amelia

AML 54 -019






Re: AC pump form Super Maramu

Jose Alegria
 

Eric
About bilge pump Amel dont have anymore.
you can find a new one at:

-- 
TF MARINE SRL
Lucca – Italy
Tel & Fax: +39 0584 338238
website: www.tfmarine.it 
email: 
Last 1 1/2 months to arrive

Good winds


Jose Alegria
Amel55 #03-MERIT
+351918663037
Josealegr@...



No dia 11/07/2021, às 08:00, eric freedman <kimberlite@...> escreveu:



 

Our Clapeda AC pump finally bit the dust. Some time ago it was suggested that the March AC-5C-MD 230 volt was a good substitute.

I do have that one on board. However, it has open windings, it has a lower output than the Calpeda and is not as robust.

I will install it temporarily.

Are there any other substitutes that are a little friendlier to salt water and are a better pump than the March.

I did find a Calpeda model BCM22/1/A-R. It will work but it is really overkill for this system.

Any other suggestions?

 

Does anyone know if Amel still stocks the original AMFA bilge pump? I am now working on my rebuilt spare, and I would like to have a spare or some other good bilge pump.

The AMFA pump is excellent pump and I even have found pieces of cable ties in it.

Any ideas or suggestions?

 

Fair Winds,

Eric

SM 376 Kimberlite


AC pump form Super Maramu

Eric Freedman
 

 

Our Clapeda AC pump finally bit the dust. Some time ago it was suggested that the March AC-5C-MD 230 volt was a good substitute.

I do have that one on board. However, it has open windings, it has a lower output than the Calpeda and is not as robust.

I will install it temporarily.

Are there any other substitutes that are a little friendlier to salt water and are a better pump than the March.

I did find a Calpeda model BCM22/1/A-R. It will work but it is really overkill for this system.

Any other suggestions?

 

Does anyone know if Amel still stocks the original AMFA bilge pump? I am now working on my rebuilt spare, and I would like to have a spare or some other good bilge pump.

The AMFA pump is excellent pump and I even have found pieces of cable ties in it.

Any ideas or suggestions?

 

Fair Winds,

Eric

SM 376 Kimberlite


Re: GALLEY FAUCET REPLACEMENT OLDER MARAMU

Dom Cigale
 

On Sat, Jul 10, 2021 at 07:51 AM, Gregory Shea wrote:
Hello Greg
From memory, I have not modified the original installation. Adapters were sufficient. I just had to force a little to connect to the spout of the faucet. I hope you will achieve the same result as me.

1561 - 1580 of 60471