Date   

Re: Where to buy Corrosion X

 

If you buy the pump bottle, you can take it in checked luggage. The aerosol can is not allowed.
image.png
image.png



CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar

On Thu, Aug 19, 2021 at 10:06 AM Joerg Esdorn via groups.io <jhe1313=yahoo.com@groups.io> wrote:
It looks like a lot of participants in this site use Corrosion X extensively.  The problem for me is:  where do you buy it when your boat is in Europe?  I can‘t buy it in the US and take it with me on the airplane, right?  

Joerg Esdorn
A55 #53 Kincsem
Currently in La Rochelle 


Re: Surveyor

Joerg Esdorn
 

Check with Joel Potter.  

Joerg Esdorn
A55 #53 Kincsem
Currently in La Rochelle


Re: Surveyor

amelforme
 

Hello Mr. Filgiano. I can concur about Kelly Carver and recommended him to my friend Jim Watkins . He has surveyed Amel boats for my clients .Kelly Carver is a very knowledgeable boat guy who came up through the industry fixing stuff and coming up with simple solutions to complicated problems. As always, I attend every survey on every boat I sell and I am impressed with Kelly’s knowledge, thoroughness and work ethic as I watched him logically and carefully investigate all the systems on board. Very few surveyors in North America have surveyed an Amel 55 and Kelly is not amongst those who have. That said, I am sure he could do a good job for you as he is familiar with “Amel anatomy and philosophy”  and , again, he is thorough and knows how to find trouble. If you would like, if you hire Kelly, I can spend some time with him increasing his Amel 55 knowledge and tell him things to pay particular attention to.  Has the boat you are investigating been out of the water for longer than a year? Let me know and good luck.

 

All the best,

Joel

 

           JOEL F. POTTER ~ CRUISING YACHT SPECIALIST, L.L.C.

                                         The Experienced AMEL Guy

UNSURPASSED AMEL MARKETING EXPERIENCE AND PRODUCT KNOWLEDGE

                                  Office 954-462-5869  Cell 954-812-2485

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of James Watkins via groups.io
Sent: Thursday, August 19, 2021 9:01 AM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] Surveyor

 

I used KC Marine and was very satisfied with how through they were.  Kelly Carver  KC Marine.  survey@...   954 766 8100. 

 

Best Regards

Jim Watkins

Maramu hull 185

 

Sent from Mail for Windows

 

From: Gerry Filgiano
Sent: Thursday, August 19, 2021 7:46 AM
To: main@amelyachtowners.groups.io
Subject: [AmelYachtOwners] Surveyor

 

Hello Amelians,

I have recently had an offer accepted for an Amel 55 located in Florida. Does anyone have a recommendation for a good surveyor that is familiar with Amels?

 

I have been listening in to your chatter for two years now and am most impressed with your collegiality and am looking forward to becoming a full member of the group.

 

Cheers,

Gerry Filgiano A55 #32

 

 

 

 

 


Where to buy Corrosion X

Joerg Esdorn
 

It looks like a lot of participants in this site use Corrosion X extensively.  The problem for me is:  where do you buy it when your boat is in Europe?  I can‘t buy it in the US and take it with me on the airplane, right?  

Joerg Esdorn
A55 #53 Kincsem
Currently in La Rochelle 


Re: How to fix your starter motor

Ron Hynes
 

Great advice! Two years ago I was having intermittent problems with my starter and I took it to one of Fort Lauderdale‘s better-known repair shops. I was told that it was in very poor shape and to really treat it gingerly since it was on it’s last legs.


Fast forward two years and the starter failed abruptly. After searching with great difficulty in replacing this starter motor, I took it to a local repair shop and was able to talk to their technician who in very broken English told me “ this is a Bosch and I can repair it like new!“  he did and even demonstrated on his shop bench that the specs were better than new. Always find the GUY. There are entirely too many under skilled technicians giving poor advice and only exploring the most expensive options. 


Ron Hynes
S/V Swan Song (Meltem #29)
954.319.0944

On Aug 19, 2021, at 8:56 AM, CW Bill Rouse <brouse@...> wrote:


Wow, great video...I am going to look for more from this guy.

One of my favorite pieces of advice is "to find the guy." This is definitely "the guy."

I am going to send that guy one of these:
<image.png>


CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar

On Wed, Aug 18, 2021 at 9:11 PM Mark Erdos <mcerdos@...> wrote:
WOW!

Awesome! Thanks for sharing.



With best regards,

Mark

Skipper
Sailing Vessel - Cream Puff - SM2K - #275
Currently cruising - Tahiti, French Polynesia
www.creampuff.us

-----Original Message-----
From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io]
On Behalf Of eric freedman
Sent: Wednesday, August 18, 2021 2:48 PM
To: main@amelyachtowners.groups.io
Subject: [AmelYachtOwners] How to fix your starter motor



https://youtu.be/x5Gn8oREkFc



Fair Winds
Eric
Kimberlite Amel Super Maramu #376













Re: Sad News

Rick Stanley
 

I had spoken to Mark on various occasions and had email correspondence with him on the Friday before he passed. His wife emailed me several days later with the news. Very sad indeed. He seemed like a great guy.  Our condolences to his family and friends.

Rick & Meadow
S/V Althea
AMEL SM2K #317


Re: Feruno GPS GP 90

 

In my opinion, your GP 90 is at about its end of life. That said, I believe there are 3 separate boards in the GP90 and it is probably only one board failing. I had this happen to a GP80 and luckily "I found the Furno guy" in Darwin, Australia who had a non-working GP80. He swapped the failing board in mine.

If you can "find the guy" in Greece, you may be able to repair the GP90. The GP90 was replaced by the GP150 and both of those are out of production. I think you may have an issue with newer GPS receivers because unlike the GP 80 - 150, I do not believe you will find multiple ports, rather they will rely on the NEMA2k backbone.

Find the guy.

Bill

CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar

On Thu, Aug 19, 2021 at 6:20 AM ngtnewington Newington via groups.io <ngtnewington=aol.com@groups.io> wrote:
Data ports on GPS
I have discovered that the main Feruno GPS that supplies position data to the VHF and the nav system as well as SSB is only working from one port not three.
Initially the navnet stopped getting position but the VHF did, so I swapped the ports and now the navnet gets position data but not the VHF.
This has happed all of a sudden. I conclude that the GPS  had a problem.
Has anyone been down this route?
Any advice?
I am thinking it should either be sent for service or replaced…but maybe there is another solution?
Nick
Amelia
AML 54-019 sailing back towards Patmos






Re: Surveyor

James Watkins
 

I used KC Marine and was very satisfied with how through they were.  Kelly Carver  KC Marine.  survey@...   954 766 8100. 

 

Best Regards

Jim Watkins

Maramu hull 185

 

Sent from Mail for Windows

 

From: Gerry Filgiano
Sent: Thursday, August 19, 2021 7:46 AM
To: main@amelyachtowners.groups.io
Subject: [AmelYachtOwners] Surveyor

 

Hello Amelians,

I have recently had an offer accepted for an Amel 55 located in Florida. Does anyone have a recommendation for a good surveyor that is familiar with Amels?

 

I have been listening in to your chatter for two years now and am most impressed with your collegiality and am looking forward to becoming a full member of the group.

 

Cheers,

Gerry Filgiano A55 #32

 

 

 

 

 


Re: How to fix your starter motor

 

Wow, great video...I am going to look for more from this guy.

One of my favorite pieces of advice is "to find the guy." This is definitely "the guy."

I am going to send that guy one of these:
image.png

CW Bill Rouse Amel Owners Yacht School
Address: 720 Winnie, Galveston Island, Texas 77550 
View My Training Calendar

On Wed, Aug 18, 2021 at 9:11 PM Mark Erdos <mcerdos@...> wrote:
WOW!

Awesome! Thanks for sharing.



With best regards,

Mark

Skipper
Sailing Vessel - Cream Puff - SM2K - #275
Currently cruising - Tahiti, French Polynesia
www.creampuff.us

-----Original Message-----
From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io]
On Behalf Of eric freedman
Sent: Wednesday, August 18, 2021 2:48 PM
To: main@amelyachtowners.groups.io
Subject: [AmelYachtOwners] How to fix your starter motor



https://youtu.be/x5Gn8oREkFc



Fair Winds
Eric
Kimberlite Amel Super Maramu #376













Surveyor

Gerry Filgiano
 

Hello Amelians,
I have recently had an offer accepted for an Amel 55 located in Florida. Does anyone have a recommendation for a good surveyor that is familiar with Amels?

I have been listening in to your chatter for two years now and am most impressed with your collegiality and am looking forward to becoming a full member of the group.

Cheers,
Gerry Filgiano A55 #32


Re: YANMAR PARTS SUPPLIER IN MIAMI #spares

Alejandro Paquin
 

Gracias Carlos hablaré con ellos!!
--
Alex Paquin
S/V " SIMPATICO"
Amel Maramu
Hull #94, 1981


Re: YANMAR PARTS SUPPLIER IN MIAMI #spares

Alejandro Paquin
 

Thank you Bill, I will contact them.
--
Alex Paquin
S/V " SIMPATICO"
Amel Maramu
Hull #94, 1981


Feruno GPS GP 90

Nick Newington
 

Data ports on GPS
I have discovered that the main Feruno GPS that supplies position data to the VHF and the nav system as well as SSB is only working from one port not three.
Initially the navnet stopped getting position but the VHF did, so I swapped the ports and now the navnet gets position data but not the VHF.
This has happed all of a sudden. I conclude that the GPS had a problem.
Has anyone been down this route?
Any advice?
I am thinking it should either be sent for service or replaced…but maybe there is another solution?
Nick
Amelia
AML 54-019 sailing back towards Patmos


Re: #attackedbywhales #newboat WE SOLD THE BOAT! Now what??? Sailing Ocean F... #attackedbywhales #newboat

Ann-Sofie, S/Y Lady Annila
 

If you do you brake a lot of environmental laws.
Follow the instructions on www.orcaiberica.org is better.

Regards
Ann-Sofie Svanberg


Skickat från min iPhone

19/08/2021 kl. 11:03 skrev Avv Frisani <p.frisani@...>:


someone told me that throwing petrol or diesel into the sea makes them go away.  has anyone ever tried?

Pietro frisani
SY Ocean Bird
SM2k#468
Actually in Sardinia (italy)

Inviato da iPhone

Il giorno 18 ago 2021, alle ore 11:09, Stefan Jeukendrup <sjeukendrup@...> ha scritto:

Appologies, I should have searched first before asking questions...this forum is such a treasure of information.
There is Olaf's document about rudder removal:
https://amelyachtowners.groups.io/g/main/files/AMEL%20SM2K%20Rudder%20Removal/Rudder%20removal%20at%20a%20AMEL%20Super%20Maramu%202000.pdf

Olaf thank you so much! 

Stefan Jeukendrup
sv Malaka Queen
SM2k #348 @ Kilkeel, Northern Ireland


Re: #attackedbywhales #newboat WE SOLD THE BOAT! Now what??? Sailing Ocean F... #attackedbywhales #newboat

Avv Frisani
 

someone told me that throwing petrol or diesel into the sea makes them go away.  has anyone ever tried?

Pietro frisani
SY Ocean Bird
SM2k#468
Actually in Sardinia (italy)

Inviato da iPhone

Il giorno 18 ago 2021, alle ore 11:09, Stefan Jeukendrup <sjeukendrup@...> ha scritto:

Appologies, I should have searched first before asking questions...this forum is such a treasure of information.
There is Olaf's document about rudder removal:
https://amelyachtowners.groups.io/g/main/files/AMEL%20SM2K%20Rudder%20Removal/Rudder%20removal%20at%20a%20AMEL%20Super%20Maramu%202000.pdf

Olaf thank you so much! 

Stefan Jeukendrup
sv Malaka Queen
SM2k #348 @ Kilkeel, Northern Ireland


Re: New engine for 1988 Mango

Ralf Schroeder
 

Hi Andre,

a dealer in GB has a new starter on stock: https://www.parts4engines.com/perkins-4-236-starter-motor/

It's a long way to US but I think, it's faster then again 3 months.

Best wishes
Ralf

Baghira, Sharki #42


Re: Rubber door /porthole stoppers #replacement

EricOpdeweegh
 

Thanks Eric
I will contact them and see if they still have them in the spare part range

rgrds
Eric
sv Abayomi SM hull 158 


Re: How to fix your starter motor

Mark Erdos
 

WOW!

Awesome! Thanks for sharing.



With best regards,

Mark

Skipper
Sailing Vessel - Cream Puff - SM2K - #275
Currently cruising - Tahiti, French Polynesia
www.creampuff.us

-----Original Message-----
From: main@AmelYachtOwners.groups.io [mailto:main@AmelYachtOwners.groups.io]
On Behalf Of eric freedman
Sent: Wednesday, August 18, 2021 2:48 PM
To: main@amelyachtowners.groups.io
Subject: [AmelYachtOwners] How to fix your starter motor



https://youtu.be/x5Gn8oREkFc



Fair Winds
Eric
Kimberlite Amel Super Maramu #376


Re: How to fix your starter motor

Eric Freedman
 

He is the fellow who rebuilt my starter motor.

 

 

From: main@AmelYachtOwners.groups.io On Behalf Of Jason Rutledge
Sent: Wednesday, August 18, 2021 9:08 PM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] How to fix your starter motor

 

Impressive,  I'm guessing he's not local.
--
Jason Rutledge
SV Liahona
SM 335


Re: How to fix your starter motor

Jason Rutledge
 

Impressive,  I'm guessing he's not local.
--
Jason Rutledge
SV Liahona
SM 335

1661 - 1680 of 61099