Date   

Re: Number plate

Mike Johnson
 

Hi Danny,

The boats ‘marking plate’.

ON - Official Number
RT - Regulated Tonnage

Is my best guess.

Regards

Mike & Peta

SOLITUDE
SM 2K 461

On 19 Oct 2021, at 19:32, Danny and Yvonne SIMMS <simms@...> wrote:



Hi all. This wooden plate with numbers is fixed to the bulkhead inside the lazurette, on SM 299. I have no idea what it denotes. Any one Know?

Danny

SM 299

Ocean Pearl


Re: Galley sink drains

ianjenkins1946 <ianjudyjenkins@hotmail.com>
 

Can I assume that everyone has a plastic washing up bowl in their galley sinks ? Its use reduces the volume of washing up water , saves the sink surface from being chipped by a careless saucepan and , not least , if you have really dirty washing up (a fish supper maybe) you can either tip the bowl overboard or down the head.

Fresh water and washing up liquid does the head no harm.

Failing that , in England young mothers use a product called Milton to sterilise babies’ bottles . Does a great job on an Amel bilge as well. 

Ian and Judy , Pen Azen , SM 302, Kilada, Greece


On 19 Oct 2021, at 20:57, Mohammad Shirloo <mshirloo@...> wrote:



We flush the bilge several times with water and dish washing liquid once or twice every season and we do not have any issues with smell. I pour dish washing liquid in the bilge and leave the water hose running. This creates a large foam volume in the bilge. While the bilge pump runs, I also pump the manual pump that extracts all the solids from the bottom. I usually spend 2-4 hours a season on this task. In my opinion, the design is sound and eliminating this task by making an additional hole in the hull, creates more issues than it solves.

 

Also, as Bill stated, If I were looking at purchasing another Amel, this modification would certainly weigh heavily on the negative side.

 

Happy Sailing;

 

 

Mohammad and Aty

B&B Kokomo

AMEL 54 #099

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Joerg Esdorn via groups.io
Sent: Tuesday, October 19, 2021 10:43 AM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] Galley sink drain

 

The other advantage of the Amel 50/60 grey water tank vs. the prior models’ grey water in the bilge is that the tank doesn’t smell as it is hermetically sealed.  At least, that’s the theory.  So presumably you can wait longer to clean the tank …..

This summer, we used the cockpit drain on the starboard side for the first time to dispose of left over food stuff.  The problem is that whatever you throw down there has the tendency of ending up on the cockpit door which slides down into the space by the drain.  But one could put a board there to close the space off from the cockpit door.  Another option I’m considering.  Thanks everyone for your thoughts.  I would love to hear from the A55 owner who put in the through hull.  Does it gurgle like on Mark’s SM?  

Joerg

Joerg Esdorn
A55 #53 Kincsem
Currently in La Rochelle


Re: Number plate

Danny and Yvonne SIMMS
 

Thanks Michael, there is another fixed in the engine room with a completely  different set of numbers.

Danny

SM 299 Ocean Pearl

On 20 October 2021 at 07:56 Michael Winand <mickwinand@...> wrote:

That would be the registration of ship  numbers, 
Not sure what country. 
Michael Nebo sm251 

On Wed, 20 Oct 2021, 4:32 am Danny and Yvonne SIMMS, < simms@...> wrote:

Hi all. This wooden plate with numbers is fixed to the bulkhead inside the lazurette, on SM 299. I have no idea what it denotes. Any one Know?

Danny

SM 299

Ocean Pearl

 

 


Re: Number plate

Michael Winand
 

That would be the registration of ship  numbers, 
Not sure what country. 
Michael Nebo sm251 

On Wed, 20 Oct 2021, 4:32 am Danny and Yvonne SIMMS, <simms@...> wrote:

Hi all. This wooden plate with numbers is fixed to the bulkhead inside the lazurette, on SM 299. I have no idea what it denotes. Any one Know?

Danny

SM 299

Ocean Pearl


Number plate

Danny and Yvonne SIMMS
 

Hi all. This wooden plate with numbers is fixed to the bulkhead inside the lazurette, on SM 299. I have no idea what it denotes. Any one Know?

Danny

SM 299

Ocean Pearl


Re: Hardtop for Amel 54 and SM

Danny and Yvonne SIMMS
 

Hi Steve, I agree, it looks very good.

Danny

SM 299 Ocean Pearl

On 20 October 2021 at 04:41 "Steve Bell s/y Dusk SM378 via groups.io" <stevect@...> wrote:

https://youtu.be/xOpJ0X_NQdE
Hi All.
Watch this youtube video I think it's one of the best hard tops I have seen Jump to the 
12 minute mark to see it.
Not sure which boat it is maybe someone out there can find out and who built it for them .
Regards

Steve
Dusk
SM 378


Re: Autopilot drive on a Amel Maramu 46ft

Warren Traill <trailz@...>
 

Thanks for that info Volker.
I also have a Sharki. Hull#15.
Could you give me the model # of the Raymarine unit you use with the Jefa drive?
And any photo of the set up in the compartment above the sink would be really helpful also.
I have no autopilot at all.
Thanks,
Warren
Manon2

Sent from Android device

On 17 Oct 2021 12:39 am, Volker <Puchta@...> wrote:
Dirk,
we do have a Sharki snd did install the second autpilot in the aft compartment as a complete independent drive from our old 6000 system.
The second system is a Raymarine with a Jefa drive. We are very pleased with its performance.

Volker
Mickmoon, Sharki hull 176


Re: Galley sink drain

Mohammad Shirloo
 

We flush the bilge several times with water and dish washing liquid once or twice every season and we do not have any issues with smell. I pour dish washing liquid in the bilge and leave the water hose running. This creates a large foam volume in the bilge. While the bilge pump runs, I also pump the manual pump that extracts all the solids from the bottom. I usually spend 2-4 hours a season on this task. In my opinion, the design is sound and eliminating this task by making an additional hole in the hull, creates more issues than it solves.

 

Also, as Bill stated, If I were looking at purchasing another Amel, this modification would certainly weigh heavily on the negative side.

 

Happy Sailing;

 

 

Mohammad and Aty

B&B Kokomo

AMEL 54 #099

 

From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Joerg Esdorn via groups.io
Sent: Tuesday, October 19, 2021 10:43 AM
To: main@AmelYachtOwners.groups.io
Subject: Re: [AmelYachtOwners] Galley sink drain

 

The other advantage of the Amel 50/60 grey water tank vs. the prior models’ grey water in the bilge is that the tank doesn’t smell as it is hermetically sealed.  At least, that’s the theory.  So presumably you can wait longer to clean the tank …..

This summer, we used the cockpit drain on the starboard side for the first time to dispose of left over food stuff.  The problem is that whatever you throw down there has the tendency of ending up on the cockpit door which slides down into the space by the drain.  But one could put a board there to close the space off from the cockpit door.  Another option I’m considering.  Thanks everyone for your thoughts.  I would love to hear from the A55 owner who put in the through hull.  Does it gurgle like on Mark’s SM?  

Joerg

Joerg Esdorn
A55 #53 Kincsem
Currently in La Rochelle


Re: Galley sink drain

Joerg Esdorn
 

The other advantage of the Amel 50/60 grey water tank vs. the prior models’ grey water in the bilge is that the tank doesn’t smell as it is hermetically sealed.  At least, that’s the theory.  So presumably you can wait longer to clean the tank …..

This summer, we used the cockpit drain on the starboard side for the first time to dispose of left over food stuff.  The problem is that whatever you throw down there has the tendency of ending up on the cockpit door which slides down into the space by the drain.  But one could put a board there to close the space off from the cockpit door.  Another option I’m considering.  Thanks everyone for your thoughts.  I would love to hear from the A55 owner who put in the through hull.  Does it gurgle like on Mark’s SM?  

Joerg

Joerg Esdorn
A55 #53 Kincsem
Currently in La Rochelle


Re: Hardtop for Amel 54 and SM

Brent Cameron
 

I quite like the extended side curtains on that video for the Super Maramu.  The 54 doesn’t really need that as they seemed to make them just a bit longer.  This is one of the best that I’ve seen.  I only understand a bit of French but from what I can gather, he had it built to his design (shows the drawings).  It is very much like a factory A55 hard top as the inside is as pretty and well done as the exterior with solar panels and a port light to see the mainsail built in. Soleil Bleu has since changed owners so not sure if the previous owner is still reachable.  https://www.youtube.com/watch?v=DT7x0SjM648&t=1s

Brent
On Oct 19, 2021, 11:41 AM -0400, Steve Bell s/y Dusk SM378 via groups.io <stevect@...>, wrote:

https://youtu.be/xOpJ0X_NQdE
Hi All.
Watch this youtube video I think it's one of the best hard tops I have seen Jump to the 
12 minute mark to see it.
Not sure which boat it is maybe someone out there can find out and who built it for them .
Regards

Steve
Dusk
SM 378

--
Brent Cameron

Future Amel Owner & Amel Owner Registry Moderator

Oro-Medonte, Ontario, Canada


Re: Hardtop for Amel 54 and SM

Ann-Sofie, S/Y Lady Annila <ann-sofie@...>
 

It was the best solution so far, but I have some thoughts.
1. It is to low
2. You can’t open up forward, where the wind comes from
3. With the hatch in the roof, you have taken away the best position for solarpanels.


regards
Ann-Sofie
S/Y Lady Annila, SM232, 1998


Skickat från min iPhone

19/10/2021 kl. 16:41 skrev Steve Bell s/y Dusk SM378 via groups.io <stevect@...>:

https://youtu.be/xOpJ0X_NQdE
Hi All.
Watch this youtube video I think it's one of the best hard tops I have seen Jump to the 
12 minute mark to see it.
Not sure which boat it is maybe someone out there can find out and who built it for them .
Regards

Steve
Dusk
SM 378


Re: Furler /Foil connection ,rivets or machine screw

Gary Wells
 

Pat,
When I was in Martinique a while back Amel had the forestay down (for other damage) but they did replace the rivets with hex bolts that went into backing plates inside the foil.
They had the backing plates.ore-made and they fit inside the foil just right.
.
Much more robust than the rivets (better purchase) but..
It's bi-metal so steel against aluminum. So, the quandary was using tef-gel to prevent corrosion or using loc-tite to keep the bolts in place.

I opted on tef-gel and a re-tightening basically every month or after a spirited sail.

Cheers!


Re: Hardtop for Amel 54 and SM

Steve Bell s/y Dusk SM378
 

https://youtu.be/xOpJ0X_NQdE
Hi All.
Watch this youtube video I think it's one of the best hard tops I have seen Jump to the 
12 minute mark to see it.
Not sure which boat it is maybe someone out there can find out and who built it for them .
Regards

Steve
Dusk
SM 378


Preapring your Amel for the Winter in freezing temperatures

EricOpdeweegh
 

Dear fellow Amalians,

We are new in the Amel family since this summer and wonder if there are any of you familiar with te best way to prepare for the European winter ( freezing temperatures) while staying in the water.
Maybe even some of the Amel owners in The Netherlands could comment or assist?
Do you empty all your water lines, water tank? Ant freeze in your volvo and generator? Aircon spilt units? etc etc
Or do you in some way heat your boat/engine room? What to do you do when heating while you are not on board

Appreciate some advise and/or suggestions.

Best Regards

Eric and Els Opdeweegh
sv Abayomi , SM 158
Currently in The Netherlands


Re: which pump?

Scott SV Tengah
 

Do you have the electronic pressure sensor? On my 6E, there's an Led on it that shows when it is triggered by "a need for water" and tries to start the pump.

If the light turns on when you need water, then the problem is not the sensor. To be extra sure, of course, you could make sure the sensor is sending current/voltage to the motor when that light is on. While you're at it, remove the intake-output hoses and make sure nothing is blocking the sensor.

Otherwise, you may have a leak in the seal between the motor and the pump head. This is what happened to me when I didn't have an accumulator. It's pretty easy to determine if that's your problem - just take off the cap furthest away from pump head (where water lines go). If there's water/corrosion in there, your seal is damaged. Maybe you're lucky and there's just carbon buildup or perhaps your brushes are worn down.

Marco sells rebuild parts for all of their pumps. Hope this helps.

On 10/19/21, 10:49 AM, "main@AmelYachtOwners.groups.io on behalf of Nicolas Klene via groups.io" <main@AmelYachtOwners.groups.io on behalf of laixoi@...> wrote:


Hi Everybody
I have the Marco UP3/E on board which has been working perfectly up to now.lately a sort of random problem occurs ,it does not start all the time water is needed. I suspect the electronic pressostat… any idea .
Nicolas
SV DarNico
Amel 53 # 471
In Marseille 🇫🇷

--
Nicolas Klene
DarNico
SM2K # 471
In Marseille







--
Scott
2007 A54 #69
SV Tengah
http://www.svtengah.com


Amel 54 displacement

David Crisp
 

I have been looking over the displacement data for the Amel 54 and I notice there some discrepancies between some documents, I myself am now uncertain.  Have various figures and conversions been confused between imperial and US tons?

Anyway, what are the correct figures for displacement of the Amel 54 please?  Light and loaded.
What is the ballast weight? 
--
David Crisp
SV Wilna Grace
Amel 54 #58


Re: which pump?

Nicolas Klene
 

Hi Everybody
I have the Marco UP3/E on board which has been working perfectly up to now.lately a sort of random problem occurs ,it does not start all the time water is needed. I suspect the electronic pressostat… any idea .
Nicolas
SV DarNico
Amel 53 # 471
In Marseille 🇫🇷

--
Nicolas Klene
DarNico
SM2K # 471
In Marseille


Re: Hardtop for Amel 54 and SM

Andrew & Kate Lamb
 

Count us in too

Andrew Lamb
Ronpische sm472
Canet-en-Roussillon

-----Original Message-----
From: main@AmelYachtOwners.groups.io <main@AmelYachtOwners.groups.io> On Behalf Of Nicolas Klene via groups.io
Sent: 19 October 2021 09:17
To: main@amelyachtowners.groups.io
Subject: Re: [AmelYachtOwners] Hardtop for Amel 54 and SM

Hello Amelians friends
I am also interested in a hard top,and therefore would like any pictures of previous realisations . A boat designer friend of mine is making some drawings ,that I’ll share as soon as I’ve got them.
Safe sailing
Nicolas
SV DarNico
Amel 53 #471
In Marseille 🇫🇷

--
Nicolas Klene
DarNico
SM2K # 471
In Marseille


Re: Hardtop for Amel 54 and SM

Nicolas Klene
 

Hello Amelians friends
I am also interested in a hard top,and therefore would like any pictures of previous realisations . A boat designer friend of mine is making some drawings ,that I’ll share as soon as I’ve got them.
Safe sailing
Nicolas
SV DarNico
Amel 53 #471
In Marseille 🇫🇷

--
Nicolas Klene
DarNico
SM2K # 471
In Marseille


Re: Galley sink drain

Mark Barter
 

Our Super Maramu has a drain under the galley sink that goes directly into the sea. There is an option to divert the grey water from the sink into the sump. There is some gurgling on starboard tack but that is the only downside as far as I can see. I wouldn't have it arranged any other way. The sump is so much easier to clean and needs cleaning a lot less frequently. 

The only problem is that any animal fat that you allow down the sink will meet seawater and if it is cold enough it will congeal and potentially block the sink. This happened to us once. Since then we wipe as much fat off the plates as possible before washing up.

I didn't install the drain but it is a very simple set up. The through hull is an inch and quarter. 

Mark
--
Mark & Nicky Barter
S/V Nunky
SM 110

6101 - 6120 of 66608