Date   

Re: B&G Forward Scan Transducer Install

Juan de Zulueta
 

Hello team,

I have great results from the forward scan, it prevented us to hit a coral head in Martinique… (good return on investment)
I am using it everyday, it works perfectly in shallow waters in auto mode .
In very shallow waters you have only a forward view of 20 meters in front of the boat, you need to approach slowly…
I am using it in a shared screen with Map, and fish finder.
It is installed instead of the interphase.
I was not satisfied with the interphase.
I am running it on a Simard but I believe there no difference since this is Navico.

Best regards


Envoyé de mon iPhone

Le 1 févr. 2022 à 08:32, Patrick McAneny via groups.io <sailw32@...> a écrit :



Danny, I had the interphase prior to the B&G , I did not have good returns with it either. I fiddled with it a few times and never turned it on again, I thought the mud bottom on the Bay may have been the problem. As far as location,they were both mounted about where you enter the forward stateroom .
 I don’t know if there is any adjustment on the B&G ,other than range. 
If anyone has had great returns with the B&G , I would like to know about it or see a short video of their screen ,if possible.

Pat
SM Shenanigans


--
Juan de Zulueta
OPHELIE X
Super Maramu #32


Re: Alternative rigger recommendation in Europe

Ulrich Michael Dangelmeyer
 

Hi Gerhard,

please are so kind to name the rigger in Kalamata, Kalamata Marina I presume. Are you satisfied with Kalamata (Marina), do you recommend this location, e.g. for wintering?

THX and fair winds.
Ulrich
S/YSoleil Bleu / A54#088
(currently Leros GR)
Am 01.02.2022 um 14:45 schrieb Gerhard Mueller via groups.io <carcode@...>:

I got 2 years ago a new standing rigging from the sailmaker in Kalamata Grece and was very satisfied by the work, price and reliability.
--
Gerhard Mueller
Amel Sharki #60
Currently North Sea, Germany


Re: B&G Forward Scan Transducer Install

Wolfgang Weber
 

Hello to the group,
on youtube you  will find the video from B&G forwardscan installation  by Oliver from SV Vela Nautica . Installation looked very nice . I tried to get in contact with Oliver by googlemail for  measurements etc but I did not receive mail.
I will bring  the B&G Vulcan 9  (Navionics) with internal GPS  next to my Furuno Navnet (c-map) and connect to B&G H3000 .

Wolfgang Weber SY ELISE  Amel 54#162 (La Rochelle)


Re: Alternative rigger recommendation in Europe

Gerhard Mueller
 

I got 2 years ago a new standing rigging from the sailmaker in Kalamata Grece and was very satisfied by the work, price and reliability.
--
Gerhard Mueller
Amel Sharki #60
Currently North Sea, Germany


Re: Screwdriver bits and nuts

Richard Dallett
 

Is there a tool for removing these, or do you use the tool with round pins instead of double flatheads?
Richard Dallett
Mamba A54 68


Re: Screwdriver bits and nuts

Gerhard Mueller
 

Are you talking about these nuts found at Amel boats?

--
Gerhard Mueller
Amel Sharki #60
Currently North Sea, Germany


Re: Alternative rigger recommendation in Europe

Slavko Despotovic
 

I had the same issue. It is very difficult to get in touch with him. My plan is to sail to Malta. As I was talking to him, this is the most preferred solution for him.  
--
Slavko
SM 2000
#279 Bonne Anse in Croatia


Re: B&G Forward Scan Transducer Install

Patrick McAneny
 

Danny, I had the interphase prior to the B&G , I did not have good returns with it either. I fiddled with it a few times and never turned it on again, I thought the mud bottom on the Bay may have been the problem. As far as location,they were both mounted about where you enter the forward stateroom .
 I don’t know if there is any adjustment on the B&G ,other than range. 
If anyone has had great returns with the B&G , I would like to know about it or see a short video of their screen ,if possible.

Pat
SM Shenanigans


Re: Dolphin 24V30A charger manual

Paul Osterberg
 

I have sent it to you and added it the file section. It works very well with my LiFePO4 cells
Paul on SY Kerpa SM#259 Lagos, Portugal


Re: Dolphin 24V30A charger manual

Stefan Jeukendrup
 

Hi Roman,

Manual is available on the forum:

https://amelyachtowners.groups.io/g/main/filessearch?p=name%2C%2C%2C20%2C1%2C0%2C0&q=dolphin


LiFePO4 charging must be totally stopped at 100% SOC.

The Dolphin 1 provides a maintenance charge in the last stage and that must be disabled. This could be done by a hardware modification voltage.

But I am not yet convinced that the accuracy is good enough for Lithium charging.


Best regards,


Stefan Jeukendrup

EEG Technology b.v.



Op 01-02-2022 om 10:15 schreef Roman Lawrence:

Hello, does anybody have a manual for the Dolphin1 24V 30A Charger? I
want to change the batteries to LiFePO4. So I need an other load
caracteristics. My second charger is Victron Scylla , here I have the
manual.

Thanks and best regards

--
Roman Lawrence
Am Zollpfosten 3
58239 Schwerte / Germany
Email: roman.lawrence@...
Tel: 0049 (0)2304-9546717
mobil: 015233789042


--
Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft.
https://www.avast.com/antivirus





Dolphin 24V30A charger manual

Roman Lawrence
 

Hello, does anybody have a manual for the Dolphin1 24V 30A Charger? I
want to change the batteries to LiFePO4. So I need an other load
caracteristics. My second charger is Victron Scylla , here I have the
manual.

Thanks and best regards

--
Roman Lawrence
Am Zollpfosten 3
58239 Schwerte / Germany
Email: roman.lawrence@...
Tel: 0049 (0)2304-9546717
mobil: 015233789042


--
Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft.
https://www.avast.com/antivirus


Alternative rigger recommendation in Europe

Neil Meyrick
 

Hi we recently took over Revelation from Drew & Lili Gaffney. One of the things Drew was trying to do before selling the boat was to replace the standing rigging. He bought a full set of replacement rigging from ACMO which we now have, and was trying to schedule Nicky Sammut to come out and fit it but due to various factors was never able to schedule this. 

We've heard that Nicky is the top man for this, but have been struggling to get hold of him and get some dates from him when he could visit the boat. I'm still trying to agree some dates with him, but feel like the time has come to start looking at alternatives. 

The boat is currently in Carloforte in Sardinia, and the feedback I've had from rigging work done by the local yards was not positive. My insurance is currently excluding any rig damage, and when Olivier checked it over on the survey he said overall it looked ok, but he couldn't verify the condition of the forestay and would not recommend sailing other than in very light conditions until it is changed. I'm not happy about sailing a new-to-me boat for the first time with a question mark hanging over the rig. 

Which leaves me thinking that I probably need to find someone who would be able to fly in and do the work where the boat is, ideally in the next few weeks so that it is done before easter. 

Any recommendations for an alternative who could do this would be very much appreciated

Thanks
Neil


Re: B&G Forward Scan Transducer Install

Danny and Yvonne SIMMS
 

Hi Pat, we have the interphase forward sonar. In conversations with others with the same unit the verdict was generally negative. However I have found it to be all in the adjustments or tuning. Get it right and it is quite good. But that comes down to your expectations I guess.I do believe if it is mounted too far forward and not deep enough it will read surface water motion as a target. However I encourage you to try different range and sensitivity settings. This worked for me.
Kind Regards
Danny

On 01/02/2022 04:52 Patrick McAneny via groups.io <sailw32@...> wrote:


Matt, I had my transducer installed by a marine electrical company,due to it being covered by an insurance claim. I have installed a few transducers and it is pretty straightforward. With the forward scan you need to locate it down as low and forward as possible and of course the transducer needs to be installed absolutely level by contouring the plastic shim to fit the hull , of course it needs to face absolutely forward.
Having said that, I will now say if I had to do it again , I would have saved my money and not installed it. Maybe it is just my experiences,but I find the images so erratic,to be useless. I thought it was because of the soft mud of the Chesapeake affecting the returns, but I am now in the Bahamas with packed sand and the returns are still useless. I wish it worked well here , but it does not and I don’t even turn it on.
I have spoken to the B&G reps. At the Annapolis  boat show the last two years,even showing them videos of the erratic display. They had no explanations, when I asserted that they would not sell a product that is useless,would they.
I hope you have better luck than me, most everyone does, in any circumstance. I have the Luck of the Irish,but not the good type.
Good luck,
Patrick McAneny
SM Shenanigans
Black Point, Bahamas


Re: Screwdriver bits and nuts

Mike Longcor (SV Trilogy)
 

Hi guys,

Another option is to modify a flat head bit with an angle grinder or something up to the task. Kind of primitive, but it works. Take proper precautions of course - vice, safety glasses, etc.

Cheers,
Mike Longcor
SV Trilogy SM23
NZ


On Tue, Feb 1, 2022, 3:53 PM Justin Paulsen <petaris@...> wrote:
Hello,

I had to get one of these for working on something else, I ended up getting this from Amazon in the US:  https://www.amazon.com/Megapro-151TP-Tamperproof-Driver-Black/dp/B004VJY1B0

It's a multi-bit screwdriver with many of the common security bits.  I think that is what you are looking for, however check out the bits it comes with and make sure.

The quality is pretty good and it worked for my use.  It was about $32 when I bought it and it seems like it still is around that price.

- Justin
Hopeful future AMEL owner.




On Mon, Jan 31, 2022 at 7:28 PM JB Duler <jbduler@...> wrote:

Hello all,

Most of the nuts used outside are of a type U (also called PIG NOSE - SNAKE EYE TWIN PIN - TWIN HOLE - TWO HOLE - TWO PIN -2PIN - 2 HOLE)
I found some, unfortunately wrong sizes. I bought U4-U8 but it looks like I need something bigger like U9-U12
I found a source on ebay UK:
https://www.ebay.com/itm/No-12-TH7-2-PIN-SECURITY-BIT-TO-SUIT-2-HOLE-SECURITY-SCREWS-PIG-NOSE-SNAKE-EYE-/302856073354


Does that ring a bell to any of you. I looked everywhere, found some in France through Amazon but too small.
I also need the nuts (because I dropped the ones I managed to remove...).

I have some screenshots.

Idealy I would like to find a US supplier for the bits. I assume the nuts are metric.

Thanks!

John Bernard "JB" Duler
San Francisco
Meltem # 19, Western Med



--
Justin Paulsen
IT Professional

"The world is open, are you?"


Re: Screwdriver bits and nuts

Justin Paulsen
 

Hello,

I had to get one of these for working on something else, I ended up getting this from Amazon in the US:  https://www.amazon.com/Megapro-151TP-Tamperproof-Driver-Black/dp/B004VJY1B0

It's a multi-bit screwdriver with many of the common security bits.  I think that is what you are looking for, however check out the bits it comes with and make sure.

The quality is pretty good and it worked for my use.  It was about $32 when I bought it and it seems like it still is around that price.

- Justin
Hopeful future AMEL owner.




On Mon, Jan 31, 2022 at 7:28 PM JB Duler <jbduler@...> wrote:

Hello all,

Most of the nuts used outside are of a type U (also called PIG NOSE - SNAKE EYE TWIN PIN - TWIN HOLE - TWO HOLE - TWO PIN -2PIN - 2 HOLE)
I found some, unfortunately wrong sizes. I bought U4-U8 but it looks like I need something bigger like U9-U12
I found a source on ebay UK:
https://www.ebay.com/itm/No-12-TH7-2-PIN-SECURITY-BIT-TO-SUIT-2-HOLE-SECURITY-SCREWS-PIG-NOSE-SNAKE-EYE-/302856073354


Does that ring a bell to any of you. I looked everywhere, found some in France through Amazon but too small.
I also need the nuts (because I dropped the ones I managed to remove...).

I have some screenshots.

Idealy I would like to find a US supplier for the bits. I assume the nuts are metric.

Thanks!

John Bernard "JB" Duler
San Francisco
Meltem # 19, Western Med



--
Justin Paulsen
IT Professional

"The world is open, are you?"


Re: Rebuild of Main , manual gearbox

EricOpdeweegh
 

Thanks Bill, 
Will give it a try once It seems irreversible 
And nice to see you also on Noforeignland
Fair winds 
Eric 
Abayomi
SM 158

Op 1 feb. 2022 om 01:22 heeft Bill Kinney <cruisingconsulting@...> het volgende geschreven:

Mike & Eric,

You have figured correctly.  In the method I used the epoxy is ONLY inside the foil, not overflowing into the collar that connects the foil to the gearbox.

Anytime you need to get epoxy to lose its grip, apply heat.  Most cured epoxies begin to soften at relatively modest temperatures, usually below 100C.  

Bill Kinney
SM160, Harmonie
Hollywood, FL, USA


Screwdriver bits and nuts

JB Duler
 

Hello all,

Most of the nuts used outside are of a type U (also called PIG NOSE - SNAKE EYE TWIN PIN - TWIN HOLE - TWO HOLE - TWO PIN -2PIN - 2 HOLE)
I found some, unfortunately wrong sizes. I bought U4-U8 but it looks like I need something bigger like U9-U12
I found a source on ebay UK:
https://www.ebay.com/itm/No-12-TH7-2-PIN-SECURITY-BIT-TO-SUIT-2-HOLE-SECURITY-SCREWS-PIG-NOSE-SNAKE-EYE-/302856073354


Does that ring a bell to any of you. I looked everywhere, found some in France through Amazon but too small.
I also need the nuts (because I dropped the ones I managed to remove...).

I have some screenshots.

Idealy I would like to find a US supplier for the bits. I assume the nuts are metric.

Thanks!

John Bernard "JB" Duler
San Francisco
Meltem # 19, Western Med


Re: Noforeignland Amel group

Bill Kinney
 

Also joined!

Bill Kinney
Sm160, Harmonie
Hollywood, FL, USA


Re: Rebuild of Main , manual gearbox

Bill Kinney
 

Mike & Eric,

You have figured correctly.  In the method I used the epoxy is ONLY inside the foil, not overflowing into the collar that connects the foil to the gearbox.

Anytime you need to get epoxy to lose its grip, apply heat.  Most cured epoxies begin to soften at relatively modest temperatures, usually below 100C.  

Bill Kinney
SM160, Harmonie
Hollywood, FL, USA


Re: Rebuild of Main , manual gearbox

EricOpdeweegh
 

Correction : collar would not come out 
Rgrds
Eric
Abayomi
SM 158

Op 1 feb. 2022 om 01:04 heeft SV ABAYOMI <sv.abayomi@...> het volgende geschreven:

Hi Mike,
Thanks for your correction .
I see what you mean. 
Seems Bill did it the right way and the previous owner of ABAYOMI ( Nathape) not .
The manual gear box is still doing ok so I guese I will have to have a collar pre machined and once it comes up change it the right way.
Cant think of an other way right now but if you have a solution do not hesitate to jump in.
Here a photo of the situation.
Took out the lower bolt but the top one and collar would come out. You can see the epoxy on the top edge of the collar. 
Did not want to force it as all appears ok and someone told me if it is not broken don’t fix it😂 
Only wanted to check and pre maintain the 
Manual gearbox.

Rgrds 
Eric 
Abayomi 
SM 158



Op 31 jan. 2022 om 23:58 heeft Mike Longcor (SV Trilogy) <svtrilogy53@...> het volgende geschreven:


Hi Eric,

Bill's method has the bottom of the foil taped to hold the epoxy while it cures. Only after the epoxy cures is the foil put back into the collar and bolted in place.

If yours was repaired in place, it is possible epoxy has bonded the foil to the collar. I'm not sure if there's an option to separate them beside the procedure you've outlined. I will think on this. Maybe someone else has an idea.

Regards,
Mike Longcor
SV Trilogy SM23
NZ

On Tue, Feb 1, 2022, 10:31 AM EricOpdeweegh <sv.abayomi@...> wrote:
Hi Bill, 
Have been reading your weblog about your repair solution of the main foil collar filling  with epoxy.
My question would be what to do when you need to overhaul your manual furler gearbox? 
We own now ABAYOMI since June last year and found the previous owner did the same you did and filled the collar with epoxy. 
But this means we need to cut just above the collar to be able to get the manual gear box off when we want to replace the seals and O rings in the manual furler gearbox . This would mean I have to machine a new custom made collar as Amel can not supply those anymore.( I checked last month with Maud)
Do you have the same situation now or did I mis read the way you did it? 
I my opinion a half round bar filler in the foil would be a good alternative. 

Best Regards,

Eric Opdeweegh
Abayomi 
SM 158
Currently in Holland 

Op 31 jan. 2022 om 21:28 heeft Bill Kinney <cruisingconsulting@...> het volgende geschreven:

This is how we did ours. http://fetchinketch.net/boat-projects/amel-mainsail-foil-repair/  Come back to us in another ten years and we'll let you know how long it might last, but after three years, it is still perfect.  A LOT cheaper than the Amel kit, although that should be a very minor consideration for such a critical part.

The Amel kit either wasn't yet available, or just a well guarded secret when we did our repair. The kit from Amel looks to me to be a LOT more robust than the original design, but if I had to do it over again, I still would do it the way I did.

For anybody needing to do this repair, I would STRONGLY discourage just drilling a new hole and calling that good. The foil does not have enough thickness of metal to transmit the torque from the motor via a single pin without very rapid wear.

Bill Kinney
SM160, Harmonie
Hollywood FL, USA

3781 - 3800 of 65624