Date   

[Amel] Re: SM 93 Ballooner sails

Judy and Bill aboard SV BeBe <yahoogroups@...>
 

Dennis,

Yahoo strips your email address...post or send me your complete email address in this format: bill"at"svbebe.com

Bill
BeBe

--- In amelyachtowners@..., Dennis Woods <DENNISWOODS@...> wrote:

Hi Bill, I would welcome a copy if this could be possible, thanks,
Dennis
denniswoods@...

On 17 May 2011, at 06:08, Judy and Bill aboard SV BeBe wrote:

I have a PDF file of the complete manual for a SM2000 which is
17,200k...fairly large file. Unfortunately, it is too large to add
to the files section of this website which is almost full. This has
the ballooner instructions as well as everything else for a SM2000.

If you have a good Internet connection, I can email it to you if you
will post or send me your complete email address in this format:
bill"at"svbebe.com

I do not have a great Internet connection, and believe I can only
get this out one time...anybody else want a CC, let me know.
Best,

Bill
BeBe, SM2k, #387
Currently Marmaris, Turkey

--- In amelyachtowners@..., "jsrogers47" <jsrogers@>
wrote:

I would appreciate hearing from anyone who has access to the Amel
manuals for a SM 1993 or newer which gives instructions on setting
up the Ballooner sails.






Re: [Amel] Re: SM 93 Ballooner sails

Dennis Woods <DENNISWOODS@...>
 

Hi Bill, I would welcome a copy if this could be possible, thanks,
Dennis
denniswoods@...

On 17 May 2011, at 06:08, Judy and Bill aboard SV BeBe wrote:

I have a PDF file of the complete manual for a SM2000 which is
17,200k...fairly large file. Unfortunately, it is too large to add
to the files section of this website which is almost full. This has
the ballooner instructions as well as everything else for a SM2000.

If you have a good Internet connection, I can email it to you if you
will post or send me your complete email address in this format:
bill"at"svbebe.com

I do not have a great Internet connection, and believe I can only
get this out one time...anybody else want a CC, let me know.
Best,

Bill
BeBe, SM2k, #387
Currently Marmaris, Turkey

--- In amelyachtowners@..., "jsrogers47" <jsrogers@...>
wrote:

I would appreciate hearing from anyone who has access to the Amel
manuals for a SM 1993 or newer which gives instructions on setting
up the Ballooner sails.




[Non-text portions of this message have been removed]


Re: SM 93 Ballooner sails

Judy and Bill aboard SV BeBe <yahoogroups@...>
 

I have a PDF file of the complete manual for a SM2000 which is 17,200k...fairly large file. Unfortunately, it is too large to add to the files section of this website which is almost full. This has the ballooner instructions as well as everything else for a SM2000.

If you have a good Internet connection, I can email it to you if you will post or send me your complete email address in this format: bill"at"svbebe.com

I do not have a great Internet connection, and believe I can only get this out one time...anybody else want a CC, let me know.
Best,

Bill
BeBe, SM2k, #387
Currently Marmaris, Turkey

--- In amelyachtowners@..., "jsrogers47" <jsrogers@...> wrote:

I would appreciate hearing from anyone who has access to the Amel manuals for a SM 1993 or newer which gives instructions on setting up the Ballooner sails.


SM 93 Ballooner sails

jsrogers47 <jsrogers@...>
 

I would appreciate hearing from anyone who has access to the Amel manuals for a SM 1993 or newer which gives instructions on setting up the Ballooner sails.


Re: [Amel] RE: Renault--mast paint

bsarff@...
 

Do you know if Awlgrip can be applied over existing paint on an older Maramu (1985).  I  have been told that if the original paint is a one part paint then i can not use a two part paint over it with out completely stripping all paint off.  The original paint appears to be a two part paint but I don't know how to verify it.  Does anyone have info on this?



Bob

----- Original Message -----
From: "Ian Shepherd" <sv_freespirit@...>
To: amelyachtowners@...
Sent: Tuesday, April 19, 2011 2:42:28 AM
Subject: Re: [Amel] RE: Renault--mast paint

 




Are you talking about SM mast paint or an earlier model? For my SM 2000,
Amel quoted me the following:

Paint Awlgrip Type 00B006G (White Amel No 3)

Hardener 000G3010 Awlgrip Cat 2

Thinner 000T0001

If the Renault paint matches, then it would sure be easier to obtain
here in Cyprus. Can someone please verify that t does match on a SM?

Regards

Ian Shepherd SM 2000 414 Crusader

On 14/04/2011 12:59, kimberlite wrote:



_____

From: kimberlite [mailto: kimberlite@...
<mailto:kimberlite%40optonline.net>]
Sent: Thursday, April 14, 2011 7:58 AM
To: 'amelyachtowners@...
<mailto:%27amelyachtowners%40yahoogroups.com>'
Subject: Renault--mast paint

Pat,

I thought someone once posted the part number of the paint on the
forum but
I could not locate it.

I need to touch up the base of my main mast and would like to use the same
paint.

Fair Winds

Eric

Amel Super Maramu #376 Kimberlite

_____

From: amelyachtowners@...
<mailto:amelyachtowners%40yahoogroups.com>
[mailto: amelyachtowners@...
<mailto:amelyachtowners%40yahoogroups.com>] On Behalf Of
sailw32@... <mailto:sailw32%40aol.com>
Sent: Thursday, April 14, 2011 7:55 AM
To: amelyachtowners@...
<mailto:amelyachtowners%40yahoogroups.com>
Subject: Re: [Amel] 220v supply to watermaker

Eric, You may be correct, Amel may well have used a Renault paint. I
said ,
I just do not have any knowledge of Renault paints and plan to use
Awlgrip
which I am familiar with and think cannot be beat for a boat. I am
sure Amel

could provide info on the paint.

Thanks, Pat





[Non-text portions of this message have been removed]




[Non-text portions of this message have been removed]


Re: [Amel] nav bulbs

Roque
 

Hi

try http://www.atlantalightbulbs.com/

<http://www.atlantalightbulbs.com/>Good luck

Roque
S/Y Atica - Amel 54, currently in Spain

2011/5/15 sjors prins <sjorsprins@...>



good morning,
I just bought an older Maramu, built in 1978, She is in good shape. just
that the bulbs in the navigation lights are burned out. the nav lights are
still in good shape but I cannot find a replacement bulb. the base of the
bulb is bigger than usual, about 19 mm wide. regards,
George prins
these bulbs have Double Contacts on the base and the side contacts are
aligned on the same plane / level side contacts.
on the back cover of the nav light is written : mm 193 sn 25w. it is about
19 mm in diameter (3/4inch) Dr Led nor Sailers sam do not carrie them
Does anyone know where I could find such bulbs?





nav bulbs

sjors prins <sjorsprins@...>
 

good morning, 
I just bought an older Maramu, built in 1978, She is in good shape. just that the bulbs in the navigation lights are burned out. the nav lights are still in good shape but I cannot find a replacement bulb. the base of the bulb is bigger than usual, about 19 mm wide. regards,
George prins
these bulbs have Double Contacts on the base and the side contacts are aligned on the same plane / level side contacts.
on the back cover of the nav light is written : mm 193 sn 25w. it is about 19 mm in diameter (3/4inch) Dr Led nor Sailers sam do not carrie them Does anyone know where I could find such  bulbs?  
 
 
[Non-text portions of this message have been removed]


Re: [Amel] Alternator on Perkins Prima m80

Rainer Huthmacher
 

Thanks so much, this info will do it.....

To: amelyachtowners@...
From: jsrogers@...
Date: Sat, 14 May 2011 17:02:46 -0400
Subject: RE: [Amel] Alternator on Perkins Prima m80
























Rainer, while I have been occupied about how to replace my Motorola Prop

generator, I did not realize that you are asking about the main 24V

alternator. The previous owner of my SM replaced the original Motorola

alternator with a Balmar 65 Amp alternator, Model No. 9024, Serial No. 10713

model, and this has been working without any issues.



Regarding the selection process I found the attached pdf file which may be

of help to you.



John

-----Original Message-----

From: amelyachtowners@...

[mailto:amelyachtowners@...] On Behalf Of Rainer Huthmacher

Sent: Thursday, May 12, 2011 4:58 PM

To: amelyachtowners@...

Subject: RE: [Amel] Alternator on Perkins Prima m80



Hi john,

Wow that was a fast reply. As your SM is also of '93 and you are looking to

replace your alternator what do you think about the Balmar series 6 24volt

70 amp? Just curios...

Rainer



To: amelyachtowners@...

From: jsrogers@...

Date: Thu, 12 May 2011 16:20:09 -0400

Subject: RE: [Amel] Alternator on Perkins Prima m80



I have removed the Motorolla alternator from my 1993 SM. While I am

still



looking for a match, I can easily make measurements for you.



John Rogers



SM #105



-----Original Message-----



From: amelyachtowners@...



[mailto:amelyachtowners@...] On Behalf Of Rainer Huthmacher



Sent: Thursday, May 12, 2011 1:25 PM



To: amelyachtowners@...



Subject: [Amel] Alternator on Perkins Prima m80



Hello everybody,On my Perkins Prima mt80 I have a 30amp Motorolla alternator



wich I would like to replace with a Balmar 70amp unit. As I'm in the US



right now I would like to by it here, because it is less than half of what



it is in Europe. Unfortunately I don't have the measurements of the



Motorolla with me and here comes my question: Does anybody know witch Balmar



model has the same measurements as the Motorolla unit? Every suggestions are



appreciated.



Joel, your comments are aways a pleasure to read and we all wait for that



book....



Eric, your hurricane story and your seamanship are both incredible....



Yossi, I was looking over 3 years around the world at every Amel for sale



(Maramu and Mango). Finaly I bought a Supermaramu for 145.000.- Euros(the



cheapest I ever heard of) but invested allready 30.000.- and will invest



another 30.000.- to feel confident with the boat.(all the work done by



myself) A seworthy Maramu will cost you 100.000.- Euros, everything else is



a projectboat



All the best to all of you,Rainer HuthmacherSM#69 "Yin Yang"To:



amelyachtowners@...



From: dave_benjamin@...



Date: Wed, 11 May 2011 19:38:23 +0000



Subject: [Amel] Re: Want to buy Amel maramu



Yossi,



Good luck. I think at that price point you will have a project boat needing



a major refit. Perhaps you may want to consider the Sharki. It's very much



like the Maramu except there is no toilet compartment in the aft cabin.



You will find it far more economical to buy a Maramu that has been updated



than to refit one yourself. Our Maramu had approximimately $130,000 USD



invested in it by the previous owner over four years and we probably spent



another $20K ourselves.



--- In amelyachtowners@..., "yossi_kl" <yossi_kl@...> wrote:





Well maintained inside,outside,engine ext. and very good equipped for sea


going .



My budget for purchasing a boat is 100,000 (USD).


Thanks a lot


Yossi








[Non-text portions of this message have been removed]



------------------------------------



Yahoo! Groups Links







[Non-text portions of this message have been removed]



------------------------------------



Yahoo! Groups Links






























[Non-text portions of this message have been removed]


Re: [Amel] Shipping from Amel, SM #347

amelforme
 

Joel F. Potter
Cruising Yacht Specialist.
Amel's Sole Associate For America.
Sent from my iPhone.
Office: 954 462 5869
Cell: 954 812 2485

On May 14, 2011, at 5:22 PM, "jsrogers47" <jsrogers@...> wrote:

On the subject of Rudder Zincs, does anyone know the dimensions of the bolts used to fasten them to the rudder?

Thanks

--- In amelyachtowners@..., kimberlite@... wrote:

Are you talking about the 2 round zincs on the rudder?
if so they are standard r5 zincs availabla at any chandlery,
just drill out the center hole a bit larger and with a bench grinder flatten the top of the zunc so a washer will fit on it,
&#92;Eric
kimberlite

----- Original Message -----
From: "JOHN W."
Date: Wednesday, April 27, 2011 8:35 am
Subject: [Amel] Shipping from Amel, SM #347
To: amelyachtowners@...

I asked Amel to ship zincs for my boat to Tortola, BVI. Is there
an inexpensive way to accomplish this as they quote 230 Euros in
transport charges?
John Sulajon


[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]


Re: [Amel] Shipping from Amel, SM #347

jsrogers47 <jsrogers@...>
 

On the subject of Rudder Zincs, does anyone know the dimensions of the bolts used to fasten them to the rudder?

Thanks

--- In amelyachtowners@..., kimberlite@... wrote:

Are you talking about the 2 round zincs on the rudder?
if so they are standard r5 zincs availabla at any chandlery,
just drill out the center hole a bit larger and with a bench grinder flatten the top of the zunc so a washer will fit on it,
&#92;Eric
kimberlite

----- Original Message -----
From: "JOHN W."
Date: Wednesday, April 27, 2011 8:35 am
Subject: [Amel] Shipping from Amel, SM #347
To: amelyachtowners@...

I asked Amel to ship zincs for my boat to Tortola, BVI. Is there
an inexpensive way to accomplish this as they quote 230 Euros in
transport charges?
John Sulajon




Re: [Amel] Alternator on Perkins Prima m80

john rogers <jsrogers@...>
 

Rainer, while I have been occupied about how to replace my Motorola Prop
generator, I did not realize that you are asking about the main 24V
alternator. The previous owner of my SM replaced the original Motorola
alternator with a Balmar 65 Amp alternator, Model No. 9024, Serial No. 10713
model, and this has been working without any issues.

Regarding the selection process I found the attached pdf file which may be
of help to you.

John

-----Original Message-----
From: amelyachtowners@...
[mailto:amelyachtowners@...] On Behalf Of Rainer Huthmacher
Sent: Thursday, May 12, 2011 4:58 PM
To: amelyachtowners@...
Subject: RE: [Amel] Alternator on Perkins Prima m80

Hi john,
Wow that was a fast reply. As your SM is also of '93 and you are looking to
replace your alternator what do you think about the Balmar series 6 24volt
70 amp? Just curios...
Rainer

To: amelyachtowners@...
From: jsrogers@...
Date: Thu, 12 May 2011 16:20:09 -0400
Subject: RE: [Amel] Alternator on Perkins Prima m80
























I have removed the Motorolla alternator from my 1993 SM. While I am
still

looking for a match, I can easily make measurements for you.

John Rogers

SM #105



-----Original Message-----

From: amelyachtowners@...

[mailto:amelyachtowners@...] On Behalf Of Rainer Huthmacher

Sent: Thursday, May 12, 2011 1:25 PM

To: amelyachtowners@...

Subject: [Amel] Alternator on Perkins Prima m80



Hello everybody,On my Perkins Prima mt80 I have a 30amp Motorolla alternator

wich I would like to replace with a Balmar 70amp unit. As I'm in the US

right now I would like to by it here, because it is less than half of what

it is in Europe. Unfortunately I don't have the measurements of the

Motorolla with me and here comes my question: Does anybody know witch Balmar

model has the same measurements as the Motorolla unit? Every suggestions are

appreciated.

Joel, your comments are aways a pleasure to read and we all wait for that

book....

Eric, your hurricane story and your seamanship are both incredible....

Yossi, I was looking over 3 years around the world at every Amel for sale

(Maramu and Mango). Finaly I bought a Supermaramu for 145.000.- Euros(the

cheapest I ever heard of) but invested allready 30.000.- and will invest

another 30.000.- to feel confident with the boat.(all the work done by

myself) A seworthy Maramu will cost you 100.000.- Euros, everything else is

a projectboat

All the best to all of you,Rainer HuthmacherSM#69 "Yin Yang"To:

amelyachtowners@...

From: dave_benjamin@...

Date: Wed, 11 May 2011 19:38:23 +0000

Subject: [Amel] Re: Want to buy Amel maramu



Yossi,



Good luck. I think at that price point you will have a project boat needing

a major refit. Perhaps you may want to consider the Sharki. It's very much

like the Maramu except there is no toilet compartment in the aft cabin.



You will find it far more economical to buy a Maramu that has been updated

than to refit one yourself. Our Maramu had approximimately $130,000 USD

invested in it by the previous owner over four years and we probably spent

another $20K ourselves.



--- In amelyachtowners@..., "yossi_kl" <yossi_kl@...> wrote:





Well maintained inside,outside,engine ext. and very good equipped for sea
going .



My budget for purchasing a boat is 100,000 (USD).


Thanks a lot


Yossi












------------------------------------



Yahoo! Groups Links






























------------------------------------

Yahoo! Groups Links


Re: [Amel] a new amel 55

Paul LaFrance <pflafrance@...>
 

PPI
I visited the factory last week where Amel is just building the new 55'. A lot of improvements to the 55'. The 54' will still be available along with the 55' and 64'. Antoine Rioton, Directeur Commercial Adjoint, indicated that they have a number of orders for the new 55' and are just finishing off the last 54' units.

Paul LaFrance

SV NOMAD SM #362
Moored in St Martin





To: amelyachtowners@...
From: no_reply@...
Date: Thu, 12 May 2011 10:12:44 +0000
Subject: [Amel] a new amel 55






have you heard of a brand new Amel?
the AMEL 55 is coming ...
does anybody knows what will happend with the "old" 54?

Photo Albums > Amel 55 - new
rendering

ppi.pa64






[Non-text portions of this message have been removed]


Re: [Amel] schematics

Stefano Biffi
 

53' 1997 SM thanks


Da: Richard03801 <richard03801@...>
A: "amelyachtowners@..." <amelyachtowners@...>
Inviato: Venerdì 13 Maggio 2011 11:50
Oggetto: Re: [Amel] schematics


 
Do you have a 46 or 53?

Regards
Richard Piller

"Yacht Brokerage Service above and beyond the expected"

Walczak Yacht Brokerage Service LLC
2 Compromise St
Annapolis, MD 21401

Cell 603 767 5330
Office
Fax

www.Walczakyacht.com

On May 13, 2011, at 5:40, stefano biffi <cptbiffi@...> wrote:

Hi everibody, brand new owner of SM185, I've found the manuals thanks to the group exchange. I did'nt found the schematics/drawings inside the manuals, no fuel no electr no water....
any one of you have?
thanks ciao stefano



[Non-text portions of this message have been removed]




[Non-text portions of this message have been removed]


Re: [Amel] schematics

Richard03801 <richard03801@...>
 

Do you have a 46 or 53?

Regards
Richard Piller

"Yacht Brokerage Service above and beyond the expected"

Walczak Yacht Brokerage Service LLC
2 Compromise St
Annapolis, MD 21401

Cell 603 767 5330
Office
Fax

www.Walczakyacht.com

On May 13, 2011, at 5:40, stefano biffi <cptbiffi@...> wrote:

Hi everibody, brand new owner of SM185, I've found the manuals thanks to the group exchange. I did'nt found the schematics/drawings inside the manuals, no fuel no electr no water....
any one of you have?
thanks ciao stefano




schematics

Stefano Biffi
 

Hi everibody, brand new owner of SM185, I've found the manuals thanks to the group exchange. I did'nt found the schematics/drawings inside the manuals, no fuel no electr no water....
any one of you have?
thanks ciao   stefano


Re: [Amel] Alternator on Perkins Prima m80

john rogers <jsrogers@...>
 

Yes it is amazing how well this blog works. I met another couple last
summer on an Amel Mango, who replaced their alternator with a Balmar and
were very pleased. For me the project has been on a back burner, till I
check my cruising rpm, pulley size and bolt dimensions, etc. However, you
are prompting me to look into it further.

John

-----Original Message-----
From: amelyachtowners@...
[mailto:amelyachtowners@...] On Behalf Of Rainer Huthmacher
Sent: Thursday, May 12, 2011 4:58 PM
To: amelyachtowners@...
Subject: RE: [Amel] Alternator on Perkins Prima m80

Hi john,
Wow that was a fast reply. As your SM is also of '93 and you are looking to
replace your alternator what do you think about the Balmar series 6 24volt
70 amp? Just curios...
Rainer

To: amelyachtowners@...
From: jsrogers@...
Date: Thu, 12 May 2011 16:20:09 -0400
Subject: RE: [Amel] Alternator on Perkins Prima m80
























I have removed the Motorolla alternator from my 1993 SM. While I am
still

looking for a match, I can easily make measurements for you.

John Rogers

SM #105



-----Original Message-----

From: amelyachtowners@...

[mailto:amelyachtowners@...] On Behalf Of Rainer Huthmacher

Sent: Thursday, May 12, 2011 1:25 PM

To: amelyachtowners@...

Subject: [Amel] Alternator on Perkins Prima m80



Hello everybody,On my Perkins Prima mt80 I have a 30amp Motorolla alternator

wich I would like to replace with a Balmar 70amp unit. As I'm in the US

right now I would like to by it here, because it is less than half of what

it is in Europe. Unfortunately I don't have the measurements of the

Motorolla with me and here comes my question: Does anybody know witch Balmar

model has the same measurements as the Motorolla unit? Every suggestions are

appreciated.

Joel, your comments are aways a pleasure to read and we all wait for that

book....

Eric, your hurricane story and your seamanship are both incredible....

Yossi, I was looking over 3 years around the world at every Amel for sale

(Maramu and Mango). Finaly I bought a Supermaramu for 145.000.- Euros(the

cheapest I ever heard of) but invested allready 30.000.- and will invest

another 30.000.- to feel confident with the boat.(all the work done by

myself) A seworthy Maramu will cost you 100.000.- Euros, everything else is

a projectboat

All the best to all of you,Rainer HuthmacherSM#69 "Yin Yang"To:

amelyachtowners@...

From: dave_benjamin@...

Date: Wed, 11 May 2011 19:38:23 +0000

Subject: [Amel] Re: Want to buy Amel maramu



Yossi,



Good luck. I think at that price point you will have a project boat needing

a major refit. Perhaps you may want to consider the Sharki. It's very much

like the Maramu except there is no toilet compartment in the aft cabin.



You will find it far more economical to buy a Maramu that has been updated

than to refit one yourself. Our Maramu had approximimately $130,000 USD

invested in it by the previous owner over four years and we probably spent

another $20K ourselves.



--- In amelyachtowners@..., "yossi_kl" <yossi_kl@...> wrote:





Well maintained inside,outside,engine ext. and very good equipped for sea
going .



My budget for purchasing a boat is 100,000 (USD).


Thanks a lot


Yossi












------------------------------------



Yahoo! Groups Links






























------------------------------------

Yahoo! Groups Links


Re: [Amel] Spice Rack bottles

galacsea2000 <no_reply@...>
 

They are made by a German Company called Emsa. You will find the product, as it is sold (i.e. not by it self but on a rotating rack) at
http://www.emsa.com/english/products/housewares/kitchen-world/spicing/spicing-page-1/

I have not checked but I am pretty sure they are distributed in the US.

Good cooking and fair winds
JP Halphen on Galacea (SM2k # 289)

--- In amelyachtowners@..., "john rogers" <jsrogers@...> wrote:

I also like to reinstall the original Amel items when possible. If you find
the spice bottles I would appreciate hearing about it.



John Rogers

SM #105



From: amelyachtowners@...
[mailto:amelyachtowners@...] On Behalf Of LaFrance
Sent: Thursday, May 12, 2011 10:04 AM
To: amelyachtowners@...
Subject: [Amel] Spice Rack bottles





God Day
Does anyone know the make/manufacture of the spice holders that go over the
Stainless Steel bar on the port side of the galley. The SS bar is set up
high and the spice jars hook on individually. I have seen them on other
Amels and I can not figure out any other reason for the bar set up so high.
Any pictures of the spice rack would help. Amel in France did supply thes
individual spice racks but no longer have any.

Paul & Sue LaFrance
SV NOMAD SM #362







Re: [Amel] Alternator on Perkins Prima m80

Rainer Huthmacher
 

Hi john,
Wow that was a fast reply. As your SM is also of '93 and you are looking to replace your alternator what do you think about the Balmar series 6 24volt 70 amp? Just curios...
Rainer

To: amelyachtowners@...
From: jsrogers@...
Date: Thu, 12 May 2011 16:20:09 -0400
Subject: RE: [Amel] Alternator on Perkins Prima m80
























I have removed the Motorolla alternator from my 1993 SM. While I am still

looking for a match, I can easily make measurements for you.

John Rogers

SM #105

-----Original Message-----

From: amelyachtowners@...

[mailto:amelyachtowners@...] On Behalf Of Rainer Huthmacher

Sent: Thursday, May 12, 2011 1:25 PM

To: amelyachtowners@...

Subject: [Amel] Alternator on Perkins Prima m80



Hello everybody,On my Perkins Prima mt80 I have a 30amp Motorolla alternator

wich I would like to replace with a Balmar 70amp unit. As I'm in the US

right now I would like to by it here, because it is less than half of what

it is in Europe. Unfortunately I don't have the measurements of the

Motorolla with me and here comes my question: Does anybody know witch Balmar

model has the same measurements as the Motorolla unit? Every suggestions are

appreciated.

Joel, your comments are aways a pleasure to read and we all wait for that

book....

Eric, your hurricane story and your seamanship are both incredible....

Yossi, I was looking over 3 years around the world at every Amel for sale

(Maramu and Mango). Finaly I bought a Supermaramu for 145.000.- Euros(the

cheapest I ever heard of) but invested allready 30.000.- and will invest

another 30.000.- to feel confident with the boat.(all the work done by

myself) A seworthy Maramu will cost you 100.000.- Euros, everything else is

a projectboat

All the best to all of you,Rainer HuthmacherSM#69 "Yin Yang"To:

amelyachtowners@...

From: dave_benjamin@...

Date: Wed, 11 May 2011 19:38:23 +0000

Subject: [Amel] Re: Want to buy Amel maramu



Yossi,



Good luck. I think at that price point you will have a project boat needing

a major refit. Perhaps you may want to consider the Sharki. It's very much

like the Maramu except there is no toilet compartment in the aft cabin.



You will find it far more economical to buy a Maramu that has been updated

than to refit one yourself. Our Maramu had approximimately $130,000 USD

invested in it by the previous owner over four years and we probably spent

another $20K ourselves.



--- In amelyachtowners@..., "yossi_kl" <yossi_kl@...> wrote:





Well maintained inside,outside,engine ext. and very good equipped for sea
going .



My budget for purchasing a boat is 100,000 (USD).


Thanks a lot


Yossi








[Non-text portions of this message have been removed]



------------------------------------



Yahoo! Groups Links


























[Non-text portions of this message have been removed]


Re: [Amel] Alternator on Perkins Prima m80

john rogers <jsrogers@...>
 

I have removed the Motorolla alternator from my 1993 SM. While I am still
looking for a match, I can easily make measurements for you.
John Rogers
SM #105

-----Original Message-----
From: amelyachtowners@...
[mailto:amelyachtowners@...] On Behalf Of Rainer Huthmacher
Sent: Thursday, May 12, 2011 1:25 PM
To: amelyachtowners@...
Subject: [Amel] Alternator on Perkins Prima m80


Hello everybody,On my Perkins Prima mt80 I have a 30amp Motorolla alternator
wich I would like to replace with a Balmar 70amp unit. As I'm in the US
right now I would like to by it here, because it is less than half of what
it is in Europe. Unfortunately I don't have the measurements of the
Motorolla with me and here comes my question: Does anybody know witch Balmar
model has the same measurements as the Motorolla unit? Every suggestions are
appreciated.
Joel, your comments are aways a pleasure to read and we all wait for that
book....
Eric, your hurricane story and your seamanship are both incredible....
Yossi, I was looking over 3 years around the world at every Amel for sale
(Maramu and Mango). Finaly I bought a Supermaramu for 145.000.- Euros(the
cheapest I ever heard of) but invested allready 30.000.- and will invest
another 30.000.- to feel confident with the boat.(all the work done by
myself) A seworthy Maramu will cost you 100.000.- Euros, everything else is
a projectboat
All the best to all of you,Rainer HuthmacherSM#69 "Yin Yang"To:
amelyachtowners@...
From: dave_benjamin@...
Date: Wed, 11 May 2011 19:38:23 +0000
Subject: [Amel] Re: Want to buy Amel maramu




























Yossi,



Good luck. I think at that price point you will have a project boat needing
a major refit. Perhaps you may want to consider the Sharki. It's very much
like the Maramu except there is no toilet compartment in the aft cabin.



You will find it far more economical to buy a Maramu that has been updated
than to refit one yourself. Our Maramu had approximimately $130,000 USD
invested in it by the previous owner over four years and we probably spent
another $20K ourselves.



--- In amelyachtowners@..., "yossi_kl" <yossi_kl@...> wrote:

Well maintained inside,outside,engine ext. and very good equipped for sea
going .

My budget for purchasing a boat is 100,000 (USD).
Thanks a lot
Yossi





















------------------------------------

Yahoo! Groups Links


Alternator on Perkins Prima m80

Rainer Huthmacher
 

Hello everybody,On my Perkins Prima mt80 I have a 30amp Motorolla alternator wich I would like to replace with a Balmar 70amp unit. As I'm in the US right now I would like to by it here, because it is less than half of what it is in Europe. Unfortunately I don't have the measurements of the Motorolla with me and here comes my question: Does anybody know witch Balmar model has the same measurements as the Motorolla unit? Every suggestions are appreciated.
Joel, your comments are aways a pleasure to read and we all wait for that book....
Eric, your hurricane story and your seamanship are both incredible....
Yossi, I was looking over 3 years around the world at every Amel for sale (Maramu and Mango). Finaly I bought a Supermaramu for 145.000.- Euros(the cheapest I ever heard of) but invested allready 30.000.- and will invest another 30.000.- to feel confident with the boat.(all the work done by myself) A seworthy Maramu will cost you 100.000.- Euros, everything else is a projectboat
All the best to all of you,Rainer HuthmacherSM#69 "Yin Yang"To: amelyachtowners@...
From: dave_benjamin@...
Date: Wed, 11 May 2011 19:38:23 +0000
Subject: [Amel] Re: Want to buy Amel maramu




























Yossi,



Good luck. I think at that price point you will have a project boat needing a major refit. Perhaps you may want to consider the Sharki. It's very much like the Maramu except there is no toilet compartment in the aft cabin.



You will find it far more economical to buy a Maramu that has been updated than to refit one yourself. Our Maramu had approximimately $130,000 USD invested in it by the previous owner over four years and we probably spent another $20K ourselves.

--- In amelyachtowners@..., "yossi_kl" <yossi_kl@...> wrote:

Well maintained inside,outside,engine ext. and very good equipped for sea going .
My budget for purchasing a boat is 100,000 (USD).
Thanks a lot
Yossi