Hi Sharki owners, I recently decided to tackle the removal and replacement of the aft cabin bulkhead which was rotten. This is the one which borders the engine room and would be the headboard of the

Thanks Danny.  Is your generator off the front of the mizzen part way up of at the top?  Bob SV Chara Maramu hin #173

Hello Antonio, It sounds like you have the same installation as we do on our Santorin. Can you explain more about what the problem is? If it is simply leaking oil or water in the Amel "C" drive

Ian, I'm so used to my 12V boats that I forget many of my fellow owners have 24V. There is a 24v model available for the same cost. It may not be showing on the website. I checked with Rich, the

Hi Antonio,    I have a Santorin, hull number 027, built at the same time as yours. I have had no trouble with the transmission over the years. The only major work I had done was to replace the seal

The boat number is 29 , the engine perking prima 50 cv , and the engine has the alternator for the transmision but the problem is not with the engine but with the Amel piece that is behind the Hurth (

Thanks for the info on the AirMaax Dave. The link makes no mention of a 24V model which would make it unsuitable for many Amel owners. I have used an Air 403 at the top of my mizzen for the past 11

Hi before we can help you it is important to know the engine you have the hull number of the boat. ZF offers a number of replacement transmissions.  Do you have an an alternator running for the

Hello everybody : We are thinking to buy a Santorin build in 1990 and we know that the transmision in that date ( 1989-1990)was defective and the yard changed later for a new one. The old one had a

This company is owned in part by a cruiser we met while cruising the Pacific coast of Mexico. I have seen their wind generator and the components. All appear very well made. I think this unit is

Good day everyone, On our Super Maramu 2K the black coating covering the port and starboard windows forward and aft is scratched and in some cases peeling. Has anyone addressed this? If so what are

hi to everyone. i'm the new owner of a amel meltem, can anyone have the tecnhical datails or owner book for this vessel??? i tried on yhe web without any result i will appreciate very muche if you can

Hallo Gary, I did not take away the original Amel-downwind-system. I think one should consider that rising the parasailor you have just one size of sail you can use. If you sail with allways changing

We have installed a "Super Wind" wind generator on the mizzen and it is very good. Never hear it or even know it is there and it works well. The Super Wind is an expensive model but it has some

There is no kit for this. Buy some 3/8 inch stainless or aluminum rod and some one inch flat metal to match. Measure your hatch and get a welder to put the flat steel cut about 2 inches long on each

Hello, my wind system, a old BEN GEA 321, no longer works. Do any owner have any equipment that works and you want off? A greeting

Hello, my wind system, a old GEA 321, no longer works. Do any owner have any equipment that works and you want off? A greeting

Thanks to all, whenever you write you are kind and thorough. I think I understood that from your actual experience should mount the wind generator above the mizzen-mast. I already have a ready

I have had an Air X on top of the mizzen over 10 years with no problems. It is quieter and the wind is better at the top. Why don't you want it there? Miles Bidwell, S/Y Ladybug, sm216

Dear Armin, Thank you for the information on the size and the pictures were terrific. We have made arrangements in late March to go to the US representative office in ST. Petersburg, FL as they