Hello Everyone After 11 years and many thousands of miles we have sold our SM 2000. After returning to the states I have many spares in storage for sale including brand new outhaul motor and gear

Hi All, We are trying to replace the sensors for the log, in the keel. Does anyone know how to run the new senders to the instruments? Any help would be much appreciated. Peter Killen SM Pure Magic

Yes, I had the same problem with our holding tank pipes too last year. I managed to free them with a combination of using an acid (guess it was an organic stuff) and a cable they use for pulling wire

Hello, I intend to install a Wind Generator on top of the mizzen. Now, there are two antennas, the longer ist most probably for the fastnet radio (navtex)and measures 150cm. If I install the generator

Hi All, we are trying to replace the sensors for the log, in the keel. Does anyone know how to run the new senders to the instruments. Any help would be much appreciated Peter SM Pure Magic 433

Why not in "le Cap d'Agde" ? It is not very expensive, There are some AMEL boats, the boat near mine will go away... Jean-Luc,

While not Italy, you might want to think about Corsica PortaVeccio.  then take the ferry to France or Italy.   It is safe weather wise as well as in general. There is no such thing as reasonable for

Hi all I am leaving from Barcelona heading East, in 10 days. After 30 days coast hopping, I will need to leave the boat somewhere. I guess I will be close to Genoa by then. Could anyone give advice

Great. Thanks Bill. I'll download it when I see the new one. Steve

I had one from my previous boat and two technicians from Amel fitted the sensor on the centre line under the small cover just aft of the bow thruster. They put in a lot of resin filler which made a

Just next days I'm fitting an Echopilot with the professional sensor. Thus no experience yet. I'll put the sensor 20cm behind the existing sounder: I'll let you know with shots as well. Fair

Dear Bill and Attilio Thank you for the quick responses. On the pictures on the link Bill sent, this is exactly what I am describing, ie the lower beam position (24" below forward facing on front of

Colin, Check out this photo: http://groups.yahoo.com/group/amelyachtowners/photos/album/1217837093/pic/242284717/view?picmode=&mode=tn&order=ordinal&start=1&count=20&dir=asc More photos at

Hi Colin&Lauren, it should be the receiver of the speed log, being the transmitter up on the hull some 70cm forward. These two poles must look each-other, and must not be painted. Look at the SM2k

Dear Colleagues On slipping Island Pearl II today following our 11,779 n.mile trip I was very surprised to see what appeared to be a corked off cavity on the forward facing leading edge of the keel

Steve, Yes, that is my spares list, although some things have changed. I will delete that one and upload a new one in a few days. Regarding spares for the dishwasher, I do not have any suggestions

Colin,     I had the same problem on my Santorin and had a replacement made locally. A few things to note.....at least on the Santorin!    The stainless bolts that go through the hull are located

Thanks Bill. Actually, I meant spares for the dishwasher specifically, since I'd be paying a hefty fee for a wire transfer regardless of the number of items I buy. Just trying to justify the cost of

Mark, If you are talking about convenience items, you may want to order a Universal Askoll Washing Machine Magnet Motor Pump (ES1087464)from espares.com £9.99 inc VAT. It is the most common failure

Thanks Bill. I'll order the same one as you did. Mine will also be shipped to the US, but I should be able to look at it before you get yours. Are you aware of any other parts that typically fail or