Richard, Happy New Year! Are you in town/ office this week? Perhaps I can take you to lunch. Let me know what your schedule will allow. Sincerely, Scott Stusek | Marketing and Sales PANTAENIUS

Hi at about 12 kts the mast will setup a harmonic the comes and goes all is well. ALL OF THE STAYS must always!! Be tight. They should ring not go thud when hit with a wood hammer handle and the

Which Volvo is it? If it is the TMD 20, it is based on a Perkins and parts are available cheaply online as these engines were in Ford vans etc. Good luck Jean-Pierre No Amel yet! Jean-Pierre

Following Volvo service manual requires the waste gate on the turbo to be checked for movement. Last year it was stuck. Wd40 and a couple of days thinking about it had it freed off. This year I just

--- In amelyachtowners@..., "Alex" wrote: > > Can anyone share information wether the KANZAKI KMH4A gear box that is supplied with some Yanmar engines can be used to run a shaft

Hello Terry. I´ve worked with carpet all my life. I suggest you replace carpet entirely. Getting a carpet with a foam backing may be difficult unless you find some leftovers at some store. There are

I have just ordered new carpeting for Kristy. It is meant for marine environment, and has a special backing that is not supposed to deteriorate. It is made by Shaw Carpets. I have not put it in the

We are looking to replace either the backing our the entire set of carpets in Libby. The foam backing has deteriorated and is crumbling and peeling off the carpet. Has anyone replaced the backing or

Having owned Libby (SM197) for a year now and about 2000 miles of Pacific under her keel we have one phenomena that we need guidance on. While tied up at the dock we consistently notice the main Matt

Bill, I believe that the fluxgate compass, and rudder reference transducer are the same on the 300, the 400, and the 400g. Fair Winds Amel Super Maramu #376 Kimberlite Eric _____

Thanks Eric, you answered my questions, I think... Before posting, I emailed Raymarine with compatibility questions regarding the existing components which are not "plus" components. My reason was

Did he contact Ray marine? Many times they have, factory reconditioned units, also the newer model 400g Is a wire for wire change. 20 minute job there are two complete corepcaks and 2 course

I have a friend that is looking for a Raymarine 300 course computer. Since this particular course computer was on many Amels, I thought possibly someone had a spare they would like to sell. Let me

Andy, Happy New Year to you too. As for stowage... beer in the fridge, wine and champagne under the floor, grand marnier, malt whisky and cocnac under the saloon table, blender for mango daiquiris

Insert bottles of wine into old socks and store them under the floor. Cheers Barry & Robyn Tradewinds III sm 171

Hi Andy,   More important than where you stow things is recording where you stowed them.  We created an Excel spreadsheet with what we thought was sufficient detail but later found that you can't

Hi Maramu owners, Happy New Year to all !! We are currently in the process of planning to move aboard. However the downside with so much stowage space are the multitude of possibilities. We would

Dave, The length of the mizzen boom on the Sharki does not allow for a stern mounted arch or pole but I agree with you that it is the best place to mount solar panels if practical. I am not familiar

Mauro, We have our solar panels mounted in similar fashion. We plan to relocate them to a stern pole. The problem with rail mount is you often have one shaded.

Hi Graham, Happy New year to you. I own an Euros 41, but i'd like to use your ideas for the installation of the side solar panels and of the linear autopilot unit. I'm in need of replacing my rotary