Hi, Would you please email me a copy of the traveler sheave? Fair Winds Eric Amel Super Maramu #376 Kimberlite Kimberlite@... _____ From:

Was wondering about how I'd get access to the tank. Thanks Gene. Kent

I have been using a Isotherm water cooled unit using my on-board water supply for the past 12 years. NO Issues and eliminated salt water pump issues. We filter water into the tank and have a filter

Tha is again for your thoughts, Craig. Right now I have air cooled fridges. When I'm ready to set sail again I'm going to do this mod, add some solar panels and a wind generator. Already about half

Hi Kent, Well, if you've been sucking up sea water to cool the refrigerant with no problem other than the occasional jelly fish, I rather think switching to pure tank water would be, if anything,

Hi, I have refitted my Amel Euros 41 It is a very sturdy boat. I cannot think anything other than the usual checking for any second hand boat. I could not find 'weak' points yet. I even peeled the

We had side gates installed on Libertad.  They are located just forward of the cockpit where the hull is widest and most likely to be nearest the dock.  They are opened/closed by wires terminated

We have heard from the Bundaberg Port Marina that all boats in the yard are undamaged except for a few that had tarps or canvas ripped.  The river is running very high and upriver has flooded

Please find pictures of our new stainless steal jib sheet travaller disks in the photo section in album Jib Sheet Traveller Remote Control. Instead of buying new in aluminium from Amel. We made a

Hi Kent, missed one thing, yes we installed a water filled to filter eventual gelcoat bits and other things that might appear in the water tank together with valves on both sides. Good

Hi it means that they do not use materials that meet standards for drinking water/ food equipment. Like lead solder, nor do they care about other oils and stuff that may get in the system. Gary if

Ross, Thanks for checking that. Be great to know where it lives. I'm probably going to be out in Florida sometime in the next few months. Just trying to figure it out.

Hello Gary, I had my original chain re-hot dipped galvanised at a big commercial galvanising plant just north of Barcelona Spain in 2000 and it is still in good condition, I have yet to end for end

it is prudent for them!! but how a copper pipe with gas inside it can alter the water???? used in this case a plastic bucket to take your water because the tap that lead Pipes are copper with gas

I contacted Veco about using their keel cooler. Here's what they said: "Thank you for your inquiry regarding Frigoboat refrigeration, and your interest in adding Keel Coolers to your air cooled

Hi the chain on sm 209 is HT 3/8. Regards Richard Piller Cell 603 767 5330

Paul, We were on that tub of a Hunter 450CC, which my wife Lynda dubbed The Edsel (though she was comfortable enough). We cruised in the past down the entire eastern Caribbean and I have to say I

Danny, Thanks for your input. I've heard nothing but good things about the Super Wind unit, and that's the one we'll go with. The Air X generators we cruised with on our Caliber 40 (installed in

I like it too, Craig. What do you think about my idea of putting a filter in the line from the tank to the pump? A couple of valves would make it easy to change and with good water in the tank it

Hello, I am considering a Amel Euros 41. As an older Amel can any group members provide insight onto the boats possible trouble spots? Are there any particular questions I should ask outside of the