|
Re: Bilge - Ground Strap
Bill,
Thank you for posting this a while back. Based on this posting, I made a point to thoroughly inspect Cream Puff when doing a routine bilge cleaning. I used a shop vac to remove the last of the
Bill,
Thank you for posting this a while back. Based on this posting, I made a point to thoroughly inspect Cream Puff when doing a routine bilge cleaning. I used a shop vac to remove the last of the
|
By
Mark Erdos
·
#12398
·
|
|
Re: [Amel] Re: Power generators
My only concern is what happens if there's a refrigerant leak at any of the fittings inside the tank? Is refrigerant immediately detectable by taste in water, or would you just keep drinking it
My only concern is what happens if there's a refrigerant leak at any of the fittings inside the tank? Is refrigerant immediately detectable by taste in water, or would you just keep drinking it
|
By
Steve Constantine <svsummerlove@...>
·
#12397
·
|
|
Re: [Amel] Re: Refrigeration Cooling
Hi Kent,
On Summer Love SM340, there's an inspection access cover for the fresh water tank underneath the blue galley floorboard between the fridge and the washing machine. You remove this
Hi Kent,
On Summer Love SM340, there's an inspection access cover for the fresh water tank underneath the blue galley floorboard between the fridge and the washing machine. You remove this
|
By
Steve Constantine <svsummerlove@...>
·
#12396
·
|
|
Re: [Amel] Jib sheet traveller remote control
Hi
The drawings on the sheaves (disks) is now in the section F´"Files" as a pdf named "Jib Sheet traveller sheave"
Regards
Ann-Sofie & Jonas
S/Y Lady Annila SM 232
Hi
The drawings on the sheaves (disks) is now in the section F´"Files" as a pdf named "Jib Sheet traveller sheave"
Regards
Ann-Sofie & Jonas
S/Y Lady Annila SM 232
|
By
ladyannila <kanalmamman@...>
·
#12395
·
|
|
New file uploaded to amelyachtowners
Hello,
This email message is a notification to let you know that
a file has been uploaded to the Files area of the amelyachtowners
group.
File : /Jib Sheet traveller sheave.pdf
Uploaded
Hello,
This email message is a notification to let you know that
a file has been uploaded to the Files area of the amelyachtowners
group.
File : /Jib Sheet traveller sheave.pdf
Uploaded
|
By
amelyachtowners@...
·
#12394
·
|
|
Re: [Amel] Re: Anchor Cain Super Maramu...HT or BBB?
Hello Gary,
I had my original chain re-hot dipped galvanised at a big commercial galvanising plant just north of Barcelona Spain in 2009 and it is still in good condition, I have yet to end for end
Hello Gary,
I had my original chain re-hot dipped galvanised at a big commercial galvanising plant just north of Barcelona Spain in 2009 and it is still in good condition, I have yet to end for end
|
By
Anne and John Hollamby <annejohnholl@...>
·
#12393
·
|
|
Re: Re : [Amel] Pulling the mast (triatic issues)
Hello,
The triatic on SM #350 (October 2001) has insulators and a cable runs from the insulated portion and into the mizzen mast. On this thread, people generously contributed the following:
- On
Hello,
The triatic on SM #350 (October 2001) has insulators and a cable runs from the insulated portion and into the mizzen mast. On this thread, people generously contributed the following:
- On
|
By
svperegrinus <no_reply@...>
·
#12392
·
|
|
hi
hey have a look http://bit.ly/UzStpG
Chris
hey have a look http://bit.ly/UzStpG
Chris
|
By
Chris Smither <yachtakwaaba@...>
·
#12391
·
|
|
Re: [Amel] Re: Refrigeration Cooling
found this some time ago.
http://forum.ssca.org/viewtopic.php?f=4&t=10901
found this some time ago.
http://forum.ssca.org/viewtopic.php?f=4&t=10901
|
By
eric meury <ericmeury@...>
·
#12390
·
|
|
Re: [Amel] Jib sheet traveller remote control
Hi,
Would you please email me a copy of the traveler sheave?
Fair Winds
Eric
Amel Super Maramu #376 Kimberlite
Kimberlite@...
_____
From:
Hi,
Would you please email me a copy of the traveler sheave?
Fair Winds
Eric
Amel Super Maramu #376 Kimberlite
Kimberlite@...
_____
From:
|
By
Sailorman <kimberlite@...>
·
#12389
·
|
|
Re: [Amel] Re: Refrigeration Cooling
Was wondering about how I'd get access to the tank. Thanks Gene.
Kent
Was wondering about how I'd get access to the tank. Thanks Gene.
Kent
|
By
karkauai
·
#12388
·
|
|
Re: [Amel] Re: Refrigeration Cooling
I have been using a Isotherm water cooled unit using my on-board water supply for the past 12 years.
NO Issues and eliminated salt water pump issues.
We filter water into the tank and have a filter
I have been using a Isotherm water cooled unit using my on-board water supply for the past 12 years.
NO Issues and eliminated salt water pump issues.
We filter water into the tank and have a filter
|
By
Gene
·
#12387
·
|
|
Re: [Amel] Re: Refrigeration Cooling
Tha is again for your thoughts, Craig. Right now I have air cooled fridges. When I'm ready to set sail again I'm going to do this mod, add some solar panels and a wind generator. Already about half
Tha is again for your thoughts, Craig. Right now I have air cooled fridges. When I'm ready to set sail again I'm going to do this mod, add some solar panels and a wind generator. Already about half
|
By
karkauai
·
#12386
·
|
|
Re: Refrigeration Cooling
Hi Kent,
Well, if you've been sucking up sea water to cool the refrigerant with no problem other than the occasional jelly fish, I rather think switching to pure tank water would be, if anything,
Hi Kent,
Well, if you've been sucking up sea water to cool the refrigerant with no problem other than the occasional jelly fish, I rather think switching to pure tank water would be, if anything,
|
By
Craig Briggs
·
#12385
·
|
|
Re: Amel Euros 41 questions to ask
Hi,
I have refitted my Amel Euros 41
It is a very sturdy boat. I cannot think anything other than the usual checking for any second hand boat. I could not find 'weak' points yet. I even peeled the
Hi,
I have refitted my Amel Euros 41
It is a very sturdy boat. I cannot think anything other than the usual checking for any second hand boat. I could not find 'weak' points yet. I even peeled the
|
By
Jose_Luis <lji0041@...>
·
#12384
·
|
|
Re: side gates
We had side gates installed on Libertad. They are located just forward of the cockpit where the hull is widest and most likely to be nearest the dock. They are opened/closed by wires terminated
We had side gates installed on Libertad. They are located just forward of the cockpit where the hull is widest and most likely to be nearest the dock. They are opened/closed by wires terminated
|
By
sbmesasailor
·
#12383
·
|
|
Re: Bundaberg Port Marina
We have heard from the Bundaberg Port Marina that all boats in the yard are undamaged except for a few that had tarps or canvas ripped. The river is running very high and upriver has flooded
We have heard from the Bundaberg Port Marina that all boats in the yard are undamaged except for a few that had tarps or canvas ripped. The river is running very high and upriver has flooded
|
By
sbmesasailor
·
#12382
·
|
|
Jib sheet traveller remote control
Please find pictures of our new stainless steal jib sheet travaller disks in the photo section in album Jib Sheet Traveller Remote Control.
Instead of buying new in aluminium from Amel. We made a
Please find pictures of our new stainless steal jib sheet travaller disks in the photo section in album Jib Sheet Traveller Remote Control.
Instead of buying new in aluminium from Amel. We made a
|
By
ladyannila <kanalmamman@...>
·
#12381
·
|
|
Re: [Amel] Refrigeration Cooling
Hi Kent,
missed one thing, yes we installed a water filled to filter eventual gelcoat bits and other things that might appear in the water tank together with valves on both sides.
Good
Hi Kent,
missed one thing, yes we installed a water filled to filter eventual gelcoat bits and other things that might appear in the water tank together with valves on both sides.
Good
|
By
Ann-Sofie Svanberg <kanalmamman@...>
·
#12380
·
|
|
Re: [Amel] Re: Power generators
Hi it means that they do not use materials that meet standards for drinking water/ food equipment. Like lead solder, nor do they care about other oils and stuff that may get in the system.
Gary if
Hi it means that they do not use materials that meet standards for drinking water/ food equipment. Like lead solder, nor do they care about other oils and stuff that may get in the system.
Gary if
|
By
Richard03801 <richard03801@...>
·
#12379
·
|